SIST EN 13369:2004/A1:2006
(Amendment)Common rules for precast concrete products
Common rules for precast concrete products
Scope of the amendment: to change the title of subclause 4.3.1.2 of EN 13369:2004 from "Minimum dimensions" to "Minimum nominal dimensions
Allgemeine Regeln für Betonfertigteile
Regles communes pour les produits préfabriqués en béton
Skupna pravila za montažne betonske izdelke
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13369:2004/A1:2006
01-maj-2006
Skupna pravila za montažne betonske izdelke
Common rules for precast concrete products
Allgemeine Regeln für Betonfertigteile
Regles communes pour les produits préfabriqués en béton
Ta slovenski standard je istoveten z: EN 13369:2004/A1:2006
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 13369:2004/A1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13369:2004/A1:2006
---------------------- Page: 2 ----------------------
SIST EN 13369:2004/A1:2006
EUROPEAN STANDARD
EN 13369:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2006
ICS 91.100.30
English Version
Common rules for precast concrete products
Règles communes pour les produits préfabriqués en béton Allgemeine Regeln für Betonfertigteile
This amendment A1 modifies the European Standard EN 13369:2004; it was approved by CEN on 3 February 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Nor
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.