Hydraulic fluid power -- Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) -- Mounting dimensions

ISO 16656:2004 establishes mounting dimensions for single rod short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar), as required for interchangeability of these commonly used hydraulic cylinders.

Transmissions hydrauliques -- Vérins course courte à simple tige, d'alésages 32 mm à 100 mm, pour utilisation à 10 MPa (100 bar) -- Dimensions d'interchangeabilité

L'ISO 16656:2004 spécifie les dimensions d'interchangeabilité des vérins course courte à simple tige, d'alésages 32 mm à 100 mm, pour utilisation à 10 MPa (100 bar), comme requis pour l'interchangeabilité de ces vérins hydrauliques d'usage courant.

Fluidna tehnika – Hidravlika – Kratkohodni valji z enostransko batnico s premeri 32 mm do 100 mm in za 10 MPa (100 bar) – Vgradne mere

General Information

Status
Withdrawn
Publication Date
31-Oct-2005
Withdrawal Date
01-Jun-2021
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jun-2021
Due Date
24-Jun-2021
Completion Date
02-Jun-2021

Relations

Buy Standard

Standard
ISO 16656:2005
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 16656:2004 - Hydraulic fluid power -- Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) -- Mounting dimensions
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 16656:2004 - Transmissions hydrauliques -- Vérins course courte a simple tige, d'alésages 32 mm a 100 mm, pour utilisation a 10 MPa (100 bar) -- Dimensions d'interchangeabilité
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO 16656:2005
01-november-2005
Fluidna tehnika – Hidravlika – Kratkohodni valji z enostransko batnico s premeri
32 mm do 100 mm in za 10 MPa (100 bar) – Vgradne mere
Hydraulic fluid power -- Single rod, short-stroke cylinders with bores from 32 mm to 100
mm for use at 10 MPa (100 bar) -- Mounting dimensions
Transmissions hydrauliques -- Vérins course courte à simple tige, d'alésages 32 mm à
100 mm, pour utilisation à 10 MPa (100 bar) -- Dimensions d'interchangeabilité
Ta slovenski standard je istoveten z: ISO 16656:2004
ICS:
23.100.20 +LGUDYOLþQLYDOML Cylinders
SIST ISO 16656:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 16656:2005

---------------------- Page: 2 ----------------------

SIST ISO 16656:2005


INTERNATIONAL ISO
STANDARD 16656
First edition
2004-06-15


Hydraulic fluid power — Single rod,
short-stroke cylinders with bores from
32 mm to 100 mm for use at 10 MPa
(100 bar) — Mounting dimensions
Transmissions hydrauliques — Vérins course courte à simple tige,
d'alésages 32 mm à 100 mm, pour utilisation à 10 MPa (100 bar) —
Dimensions d'interchangeabilité




Reference number
ISO 16656:2004(E)
©
ISO 2004

---------------------- Page: 3 ----------------------

SIST ISO 16656:2005
ISO 16656:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2004 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 16656:2005
ISO 16656:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16656 was prepared by Technical Committee ISO/TC 131, Fluid power systems, Subcommittee SC 3,
Cylinders.
© ISO 2004 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 16656:2005
ISO 16656:2004(E)
Introduction
In hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure within an
enclosed circuit.
One component of such systems is the fluid power cylinder. This is a device that converts power into linear
mechanical force and motion. It consists of a movable element, i. e. a piston and piston rod, operating within a
cylindrical bore.

iv © ISO 2004 – All rights reserved

---------------------- Page: 6 ----------------------

SIST ISO 16656:2005
INTERNATIONAL STANDARD ISO 16656:2004(E)

Hydraulic fluid power — Single rod, short-stroke cylinders with
bores from 32 mm to 100 mm for use at 10 MPa (100 bar) —
Mounting dimensions
1 Scope
This International Standard establishes mounting dimensions for single rod short-stroke cylinders with bores
1)
...

INTERNATIONAL ISO
STANDARD 16656
First edition
2004-06-15


Hydraulic fluid power — Single rod,
short-stroke cylinders with bores from
32 mm to 100 mm for use at 10 MPa
(100 bar) — Mounting dimensions
Transmissions hydrauliques — Vérins course courte à simple tige,
d'alésages 32 mm à 100 mm, pour utilisation à 10 MPa (100 bar) —
Dimensions d'interchangeabilité




Reference number
ISO 16656:2004(E)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 16656:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2004 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 16656:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16656 was prepared by Technical Committee ISO/TC 131, Fluid power systems, Subcommittee SC 3,
Cylinders.
© ISO 2004 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 16656:2004(E)
Introduction
In hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure within an
enclosed circuit.
One component of such systems is the fluid power cylinder. This is a device that converts power into linear
mechanical force and motion. It consists of a movable element, i. e. a piston and piston rod, operating within a
cylindrical bore.

iv © ISO 2004 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 16656:2004(E)

Hydraulic fluid power — Single rod, short-stroke cylinders with
bores from 32 mm to 100 mm for use at 10 MPa (100 bar) —
Mounting dimensions
1 Scope
This International Standard establishes mounting dimensions for single rod short-stroke cylinders with bores
1)
from 32 mm to 100 mm for use at 10 MPa (100 bar ), as required for interchangeability of these commonly
used hydraulic cylinders.
NOTE 1 This International Standard is intended to provide basic guidelines while allowing manufacturers of hydraulic
equipment flexibility in the design of cylinders and not restricting technical development.
NOTE 2 The dimensions of these cylinders are most likely to require a minimum of space for mounting.
2 Normative references
The following referenced documents are indispensable for the a
...

NORME ISO
INTERNATIONALE 16656
Première édition
2004-06-15


Transmissions hydrauliques —
Vérins course courte à simple tige,
d'alésages 32 mm à 100 mm, pour
utilisation à 10 MPa (100 bar) —
Dimensions d'interchangeabilité
Hydraulic fluid power — Single rod, short-stroke cylinders with bores
from 32 mm to 100 mm for use at 10 MPa (100 bar) — Mounting
dimensions




Numéro de référence
ISO 16656:2004(F)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 16656:2004(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


©  ISO 2004
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2004 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 16656:2004(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 16656 a été élaborée par le comité technique ISO/TC 131, Transmissions hydrauliques et
pneumatiques, sous-comité SC 3, Vérins.
© ISO 2004 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 16656:2004(F)
Introduction
Dans les systèmes de transmissions hydrauliques, l'énergie est transmise et commandée par l'intermédiaire
d'un liquide sous pression circulant dans un circuit fermé.
L'un des composants de tels systèmes est le vérin hydraulique. C'est un appareil qui transforme l'énergie du
fluide en énergie mécanique agissant linéairement. Il est constitué d'un élément mobile, c'est-à-dire un piston
et une tige de piston, se déplaçant dans un alésage cylindrique.
iv © ISO 2004 – Tous droits réservés

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO 16656:2004(F)

Transmissions hydrauliques — Vérins course courte à
simple tige, d'alésages 32 mm à 100 mm, pour utilisation à
10 MPa (100 bar) — Dimensions d'interchangeabilité
1 Domaine d'application
La présente Norme internationale spécifie les dimensions d'interchangeabilité des vérins course courte à
1 )
simple tige, d'alésages 32 mm à 100 mm, pour utilisation à 10 MPa [100 bar ], comme requis pour
l'interchangeabilité de ces vérins hydrauliques d'usage courant.
NOTE 1 La présente Norme internationale fixe des orientations techniques de base tout en permettant aux fabricants
d'équipements hydrauliques une certaine flexibilité quant à la conception des vérins et ne restreint pas le progrès
technique.
NOTE 2 Les dimensions de ces vérins sont les plus courantes pour obtenir un espace minimal pour le montage.
2 Références normatives
Les documents de référence suivants sont indispensables pour l'application du prés
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.