Cranes - Loader cranes

Starting to apply EN 12999:2011, it becomes evident that there are two safety related issues where the current writing is unsatisfactory. First issue is addressed in clauses 5.4.3.1 and 5.6.1.3. These clauses deal with the requirement of indication when the boom system is not stowed in its transport position. The two clauses are now ambiguous and can be interpreted to be in contradiction. The intention when revising EN 12999 was that it for all vehicle mounted loader cranes should be required and sufficient to indicate when the angle of the first boom is out of its transport position. The two clauses should be amended to be unambiguous. Second issue is addressed in clause 5.4.1.2. This clause deals with the stabiliser feet and requires that they shall adjust to a 10° ground slope. This requirement is unsafe for timber handling cranes. These cranes often work with one leg down on the steep slope of a ditch. There, a fixed foot embeds firmly in the soft soil, whereas a tiltable foot easily slides down the slope. The clause should be amended to provide a safe requirement also for timber handling cranes. A new work item is needed to make these amendments. The work item should follow the 3 months UAP path.

Krane - Ladekrane

Appareils de levage à charge suspendue - Grues de chargement

Žerjavi - Nakladalni žerjavi - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
19-Mar-2012
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
15-Jun-2012
Due Date
20-Jun-2012
Completion Date
15-Jun-2012

Relations

Effective Date
01-Feb-2012
Effective Date
19-Jan-2023
Effective Date
18-Jan-2023
Effective Date
01-Oct-2012

Buy Standard

Draft
EN 12999:2011/kFprA1:2012
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12999:2011/kFprA1:2012
01-februar-2012
Žerjavi - Nakladalni žerjavi - Dopolnilo A1
Cranes - Loader cranes
Krane - Ladekrane
Appareils de levage à charge suspendue - Grues de chargement
Ta slovenski standard je istoveten z: EN 12999:2011/FprA1
ICS:
53.020.20 Dvigala Cranes
SIST EN 12999:2011/kFprA1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12999:2011/kFprA1:2012

---------------------- Page: 2 ----------------------

SIST EN 12999:2011/kFprA1:2012


EUROPEAN STANDARD
FINAL DRAFT
EN 12999:2011
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
January 2012
ICS 53.020.20
English Version
Cranes - Loader cranes
Appareils de levage à charge suspendue - Grues de Krane - Ladekrane
chargement
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 147.

This draft amendment A1, if approved, will modify the European Standard EN 12999:2011. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12999:2011/FprA1:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12999:2011/kFprA1:2012
EN 12999:2011/FprA1:2012 (E)
Contents Page
Foreword .3
1 Modification to Clause 3 .4
2 Modif
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.