iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 615:1997

(Main)

Fire protection - Fire extinguishing media - Specification for powders (other than class D powders)

Fire protection - Fire extinguishing media - Specification for powders (other than class D powders)

This European Standard is applicable to fire extinguishing powders for fire classes A, B and C. It specifies, by means of defined test methods, minimum requirements for the chemical and physical properties and minimum extinguishing capabilities. Requirements are also specified for the information and data to begiven by the supplier. This European Standard is not applicable to powders for class D fires. Note 1: The classification of fires is given in EN 2. Note 2: Some countries have national standards for class D powders.

Brandschutz - Löschmittel - Anforderungen an Löschpulver (nicht für Löschpulver der Brandklasse D)

Diese Europäische Norm spezifiziert die Anforderungen an die chemischen und physikalischen Eigenschaften von Löschpulvern für die Brandklassen A, B und C sowie die Mindestanforderungen in festgelegten Prüfmethoden. Diese Anforderungen dienen auch als Grundlage für die Deklaration durch den Hersteller. Löschpulver für die Brandklasse D unterliegen nicht dem Geltungsbereich dieser Europäischen Norm. Anmerkung 1: Die Einteilung der Brandklassen erfolgt nach EN 2; Anmerkung 2: Einige Länder haben für Löschpulver der Brandklasse D nationale Normen.

Protection contre l'incendie - Agents extincteurs - Prescriptions pour les poudres (autres que les poudres pour classe D)

La présente norme européenne définit les exigences concernant les propriétés physiques et chimiques ainsi que les performances minimales, déterminées par des méthodes de test, de poudres extinctrices utilisables dans la lutte contre les incendies des classes A, B et C. Elle précise également les renseignements et informations que le fournisseur doit donner. Les poudres de classe D n'entrent pas dans le cadre de la présente norme européenne. Note 1: La classification des feux se trouve dans EN 2; Note 2: Certains pays ont défini des normes nationales pour les poudres de classe D.

Požarna zaščita - Gasila - Specifikacije za praške (razen za praške razreda D)

General Information

Status
Withdrawn
Publication Date
30-Nov-1997
Withdrawal Date
18-May-2009
ICS
13.220.20 - Fire protection
Technical Committee
POZ - Požarna varnost
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
18-May-2009
Due Date
10-Jun-2009
Completion Date
19-May-2009
Directive
89/106/EEC - Construction products
Ref Project
EN 615:1994 - Fire protection - Fire extinguishing media - Specification for powders (other than class D powders)

Relations

Corrected By
SIST EN 615:1997/AC:2006 - Fire protection - Fire extinguishing media - Specifications for powders (other than class D powders)
Effective Date
22-Dec-2008
Replaced By
SIST EN 615:2009 - Fire protection - Fire extinguishing media - Specifications for powders (other than class D powders)
Effective Date
01-Jul-2009
Amended By
SIST EN 615:1994/A1:2001 - Fire protection - Fire extinguishing media - Specifications for powders (other than class D powders)
Effective Date
22-Dec-2008
Replaced By
SIST EN 615:2009 - Fire protection - Fire extinguishing media - Specifications for powders (other than class D powders)
Effective Date
08-Jun-2022
Amended By
SIST EN 615:1994/A1:2001 - Fire protection - Fire extinguishing media - Specifications for powders (other than class D powders)
Effective Date
08-Jun-2022
Corrected By
SIST EN 615:1997/AC:2006 - Fire protection - Fire extinguishing media - Specifications for powders (other than class D powders)
Effective Date
08-Jun-2022

Buy Standard

EN 615:1997EN 615:1997
PreviousNext
Standard
EN 615:1997
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 615:1997
01-december-1997
3RåDUQD]DãþLWD*DVLOD6SHFLILNDFLMH]DSUDãNH UD]HQ]DSUDãNHUD]UHGD'
Fire protection - Fire extinguishing media - Specification for powders (other than class D
powders)
Brandschutz - Löschmittel - Anforderungen an Löschpulver (nicht für Löschpulver der
Brandklasse D)
Protection contre l'incendie - Agents extincteurs - Prescriptions pour les poudres (autres
que les poudres pour classe D)
Ta slovenski standard je istoveten z: EN 615:1994
ICS:
13.220.20 3RåDUQD]DãþLWD Fire protection
SIST EN 615:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 615:1997

---------------------- Page: 2 ----------------------

SIST EN 615:1997

---------------------- Page: 3 ----------------------

SIST EN 615:1997

---------------------- Page: 4 ----------------------

SIST EN 615:1997

---------------------- Page: 5 ----------------------

SIST EN 615:1997

---------------------- Page: 6 ------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14972-6:2023(Main)
Fixed firefighting systems - Water mist systems - Part 6: Test protocol for false floors and false ceilings for automatic nozzle systems
EN 14972-6:2023

This document specifies the evaluation of the firefighting performance of water mist systems for false ceilings and false floors with heights between 300 mm and 800 mm.
This fire test protocol is applicable to pendent or upright automatic nozzles to be used in unlimited volume.
This document is applicable for horizontal, solid, flat ceilings.
It is not possible to apply these tests to other applications than the ones specified within this fire test protocol.
In case of a positive result of the tests, the water mist system can be applied for the protection of the following risks:
False ceilings and false floors between 300 mm and 800 mm.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14972-11:2023(Main)
Fixed firefighting systems - Water mist systems - Part 11: Test protocol for cable tunnels for open nozzle systems
EN 14972-11:2023

This document specifies fire testing requirements for water mist systems used for fire protection of cable tunnels. The test protocol covers deluge water mist systems with open nozzles which are either activated with an automatic release system, e.g. fire detection system, or manually released.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 12101-11:2022(Main)
Smoke and heat control systems - Part 11: Horizontal flow powered ventilation systems for enclosed car parks
CEN/TS 12101-11:2022

(1) This technical specification gives minimum design, installation and commissioning requirements for powered smoke and heat control systems for enclosed car parks using horizontal flow powered ventilation, with or without sprinkler protection, on one or more levels, for cars and light commercial vehicles (max 3,5 t), to reach the design objectives outlined in this technical specification.
see design objectives in CEN TC191 SC1 doc. N721, 5.1 (1):
For any fire location, the system shall keep at least one access route sufficiently clear of smoke for fire-fighters from the exterior or from a protected access route (e.g. stairwell) to a distance of 15 m from the front of the fire. Criteria should be verified when the conditions within the car park have reached a steady-state regime.
NOTE: The limit of 15 m is necessary to reach the fire with the jet from the hose nozzle.
(2) This technical specification is applicable for fires of cars powered by petrol or diesel or other fuels which will have a fire performance similar to vehicles powered by petrol or by electricity. It is not applicable for other fires within the car park (e.g. storage).
NOTE: It is assumed that cars powered by fuels other than petrol or diesel will have a fire performance similar to vehicles powered by petrol or diesel.
(3) This technical specification only covers traditional car parks that are with cars parked alongside each other with common access roadways/lanes for cars to be driven in and out. It does not cover other forms of car parking systems, such as stacking systems. Smoke and heat control systems for vehicles more than 3,5 t (lorry parks, coach parks, etc.) are not covered by this technical specification.
(4) This technical specification does not cover requirements for day‐to‐day ventilation.
(5) Any other risks than fire from cars are not covered by this technical specification.

  • Technical specification
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12259-14:2020+A1:2022(Main)
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 14: Sprinklers for residential applications
EN 12259-14:2020+A1:2022

This document specifies requirements for the construction and performance of residential sprinklers as well as test methods for their type approval, which are operated by a change of state of an element or bursting of a glass bulb under the influence of heat, for use only in automatic sprinkler systems for domestic and residential applications as defined in EN 16925:− .
This standard does not cover representative fire and other tests for special sprinklers that are intended to provide for specific fire hazards, nor does it cover fire and other tests for sprinklers for commercial and industrial sprinkler systems as in EN 12845. Those test requirements are covered by EN 12259-1.
NOTE 1   All pressure data in this European Standard are given as gauge pressures in bar.
NOTE 2    Sprinklers according to EN12259-1 can also be used in residential and domestic applications if the system is designed according to EN 12845.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12101-6:2022(Main)
Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits
EN 12101-6:2022

This document applies to pressure differential system kits, positioned on the market and intended to operate as part of a pressure differential system. The purpose of a pressure differential system is to prevent protected spaces from smoke spread by using pressure difference and airflow. This document specifies characteristics and test methods for components and kits for pressure differential systems to produce and control the required pressure differential and airflow between protected and unprotected space.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12101-13:2022(Main)
Smoke and heat control systems - Part 13: Pressure differential systems (PDS) - Design and calculation methods, installation, acceptance testing, routine testing and maintenance
EN 12101-13:2022

This document gives guidance and requirements for the design and calculation methods, installation, acceptance testing, routine testing and maintenance for pressure differential systems (PDS).
PDSs are designed to hold back smoke at a leaky physical barrier in a building, such as a door (either open or closed) or other similarly restricted openings and to keep tenable conditions in escape and access routes depending on the application.
It covers systems intended to protect means of escape e.g. staircases, corridors, lobbies, as well as systems intended to provide a protected firefighting bridgehead for the fire services.
It provides details on the critical features and relevant procedures for the installation.
It describes the commissioning procedures and acceptance testing criteria required to confirm that the calculated design is achieved in the building.
This document gives complete rules, requirements and procedures to design PDS for buildings up to 60 m.
For buildings taller than 60 m the same requirements are given (e.g. Table 1), but additional calculations and verification methods are necessary. Requirements for such methods and verification are given in Annex D, but the methods fall outside the scope of this document [e.g. Computational Fluid Dynamics (CFD)].
Routine testing and maintenance requirements are also defined in the document.
In the absence of national requirements and under expected ambient and outside conditions, the requirements in Table 1 are fulfilled by the PDS.

  • Standard
    118 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    132 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17749:2022(Main)
Fire extinguishing systems in commercial kitchens - System design, documentation, and test requirements - Fire test procedures for plenum and ducts
CEN/TS 17749:2022

This document establishes the detailed test procedures for conducting the test on the plenum and air extract ducts.

  • Technical specification
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14972-15:2021(Main)
Fixed firefighting systems - Water mist systems - Part 15: Test protocol for combustion turbines in enclosures not exceeding 260 m³ for open nozzle systems
EN 14972-15:2021

This document specifies fire testing requirements for water mist systems used for fire protection of combustion turbines in enclosures with volumes not exceeding 260 m³.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14972-14:2021(Main)
Fixed firefighting systems - Water mist systems - Part 14: Test protocol for combustion turbines in enclosures exceeding 260 m³ for open nozzle systems
EN 14972-14:2021

This document specifies fire testing requirements for water mist systems used for fire protection of combustion turbines in enclosures with volumes exceeding 260 m³.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17446:2021(Main)
Fire extinguishing systems in commercial kitchens - System design, documentation, and test requirements
EN 17446:2021

This document establishes the minimum requirements applicable to the design, installation, functioning, test and maintenance of fixed automatic fire extinguishing systems for kitchen protection that covers the kitchen appliances, the hood, the plenum and the exhaust ducts.
This document also provides requirements for the construction and components performance as applicable to specific types, designs, sizes and arrangements of pre-engineered kitchen fire-extinguishing systems.
This document does not cover household kitchens or industrial food production equipment.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day