SIST EN 15816:2011
(Main)Polymer-modified bituminous thick coatings - Resistance to rain
Polymer-modified bituminous thick coatings - Resistance to rain
This European Standard specifies a procedure for determining the resistance to rain of polymer modified bituminous thick coatings for waterproofing.
Kunststoffmodifizierte Bitumendickbeschichtungen - Beständigkeit gegen Regen
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Beständigkeit gegen Regen von kunststoffmodifizierten Bitumendickbeschichtungen fest.
Revêtements bitumineux épais modifiés aux polymères pour imperméabilisation - Résistance à la pluie
La présente Norme européenne spécifie une méthode permettant de déterminer la résistance à la pluie des revêtements bitumineux épais modifiés aux polymères pour imperméabilisation.
Bitumenske debeloslojne prevleke za tesnjenje, modificirane s polimeri - Odpornost proti dežju
Ta evropski standard opredeljuje postopek za določanje odpornosti bitumenskih debeloslojnih prevlek za tesnjenje, modificiranih s polimeri, proti dežju, da se zagotovi hidroizolacija.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumenske debeloslojne prevleke za tesnjenje, modificirane s polimeri - Odpornost proti dežjuKunststoffmodifizierte Bitumendickbeschichtungen - Beständigkeit gegen RegenPolymer-modified bituminous thick coatings - Resistance to rain91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 15816:2011SIST EN 15816:2011en,fr,de01-junij-2011SIST EN 15816:2011SLOVENSKI
STANDARD
SIST EN 15816:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15816
March 2011 ICS 91.100.50 English Version
Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain
Revêtements bitumineux épais modifiés aux polymères pour imperméabilisation - Résistance à la pluie
Kunststoffmodifizierte Bitumendickbeschichtungen zur Bauwerksabdichtung - Widerstand gegen Regen This European Standard was approved by CEN on 13 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15816:2011: ESIST EN 15816:2011
EN 15816:2011 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Principle .45Apparatus .46Test specimens .56.1General .56.2Preparation .56.3Dimensions of the test specimens.66.4Conditioning of test specimens .67Procedure .67.1Test conditions .67.2Procedure .68Expression of results and precision .68.1Expression of results .68.2Precision .69Test report .6 SIST EN 15816:2011
EN 15816:2011 (E) 3 Foreword This document (EN 15816:2011) has been prepared by Technical Committee CEN/TC 361 “Project Committee — Polymer modified bituminous thick coatings for waterproofing — Definitions/requirements and test methods”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2011, and conflicting national standards shall be withdrawn at the latest by September 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent ri
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.