Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)

This part of ISO 2871 specifies a method for the determination of low-molecular-mass cationic-active materials such as monoamines, amine oxides, quaternary ammonium compounds and alkylpyridinium salts which have a main chain of 10 to 22 carbon atoms and not more than 6 other carbon atoms in the cation. The method is also suitable for other cationic-active materials. The method is applicable to solids or to aqueous solutions of the active material when the relative molecular mass of the cationic-active matter is known or when it has been previously determined if its content is expressed as a percentage by mass. If more than one type of cationic-active material is present, an estimate of average relative molecular mass may be used. The method is not applicable if anionic and/or amphoteric surface active agents are present.

Tenside - Waschmittel - Bestimmung des Gehaltes der kationaktiven Substanz - Teil 2: Kationaktive Substanz niedriger Molmasse (zwischen 200 und 500) (ISO 2871-2:2010)

Dieser Teil von ISO 2871 legt ein Verfahren fest zur Bestimmung niedrigmolekularer kationaktiver Substanz, wie z. B. Monoaminen, Aminoxiden, ternären Ammoniumverbindungen und Alkylpyridiniumsalzen, die eine Hauptkette mit 10 bis 22 Kohlenstoffatomen und nicht mehr als 6 weitere Kohlenstoffatome im Kation enthalten.
Das Verfahren ist auch für andere kationaktive Substanzen geeignet.
Das Verfahren gilt für Feststoffe oder wässrige Lösungen der Aktivsubstanz, wenn die relative Molmasse der kationaktiven Substanz bekannt ist oder vorher bestimmt wurde, falls ihr Gehalt als Massenanteil in Prozent angegeben wird. Wenn mehr als eine Art kationaktiver Substanz vorliegt, kann ein Schätzwert der mittleren relativen Molmasse verwendet werden.
Das Verfahren gilt nicht, wenn anionische und/oder amphotere Tenside vorhanden sind.

Agents de surface - Détergents - Détermination de la teneur en matière active cationique - Partie 2: Matière active cationique à faible masse moléculaire (entre 200 et 500) (ISO 2871-2:2010)

L'ISO 2871-2:2010 spécifie une méthode de détermination des matières actives cationiques à faible masse moléculaire telles que les composés monoaminés, les oxyde d'amines, les ammonium quartenaires et les sels d'alkylpyridinium qui contiennent une chaîne principale de 10 à 22 atomes de carbone et au plus 6 autres atomes de carbone dans le cation. La méthode s'applique également à d'autres matières actives cationiques.
La méthode s'applique à la matière active à l'état solide ou en solution aqueuse. La méthode ne s'applique pas si des agents de surface anioniques et/ou amphotères sont présents.

Površinsko aktivne snovi - Detergenti - Določevanje kationsko aktivnih snovi - 2. del: Kationsko aktivne snovi z majhno molekulsko maso (med 200 in 500) (ISO 2871-2:2010)

Ta del ISO 2871 določa metodo ta določevanje kationsko aktivnih materialov z nizko molekulsko maso kot so monoamini, amino oksidi, kvartarne amonijeve sestavine in soli alkilpiridina, ki imajo glavno verigo od 10 do 22 atomov ogljika in ne več kot 6 drugih atomov v kationu. Metoda je prav tako primerna za druge kationsko aktivne materiale. Metoda velja za trdne snovi ali za vodne raztopine aktivnega materiala, kadar je relativna molekulska masa kationsko aktivne snovi znana ali kadar je bilo prej dognana, če je njegova sestava izražena kot odstotek mase. Če je prisoten več kot eden kationsko aktivni material, se lahko uporabi približek povprečne relativne molekulske mase. Metoda ne velja, če so prisotni anionski in/ali amfoterični površinski agenti.

General Information

Status
Published
Public Enquiry End Date
19-Dec-2009
Publication Date
18-Aug-2010
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
06-Aug-2010
Due Date
11-Oct-2010
Completion Date
19-Aug-2010

Relations

Buy Standard

Standard
EN ISO 2871-2:2010
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2871-2:2010
01-september-2010
1DGRPHãþD
SIST EN ISO 2871-2:1997
3RYUãLQVNRDNWLYQHVQRYL'HWHUJHQWL'RORþHYDQMHNDWLRQVNRDNWLYQLKVQRYL
GHO.DWLRQVNRDNWLYQHVQRYL]PDMKQRPROHNXOVNRPDVR PHGLQ  ,62

Surface active agents - Detergents - Determination of cationic-active matter content -
Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-
2:2010)
Tenside - Waschmittel - Bestimmung des Gehaltes der kationaktiven Substanz - Teil 2:
Kationaktive Substanz niedriger Molmasse (zwischen 200 und 500) (ISO 2871-2:2010)
Agents de surface - Détergents - Détermination de la teneur en matière active cationique
- Partie 2: Matière active cationique à faible masse moléculaire (entre 200 et 500) (ISO
2871-2:2010)
Ta slovenski standard je istoveten z: EN ISO 2871-2:2010
ICS:
71.100.40 Površinsko aktivna sredstva Surface active agents
SIST EN ISO 2871-2:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2871-2:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 2871-2:2010


EUROPEAN STANDARD
EN ISO 2871-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2010
ICS 71.100.40 Supersedes EN ISO 2871-2:1994
English Version
Surface active agents - Detergents - Determination of cationic-
active matter content - Part 2: Cationic-active matter of low
molecular mass (between 200 and 500) (ISO 2871-2:2010)
Agents de surface - Détergents - Détermination de la Tenside - Waschmittel - Bestimmung des Gehaltes der
teneur en matière active cationique - Partie 2: Matière kationaktiven Substanz - Teil 2: Kationaktive Substanz
active cationique à faible masse moléculaire (entre 200 et niedriger Molmasse (zwischen 200 und 500) (ISO 2871-
500) (ISO 2871-2:2010) 2:2010)
This European Standard was approved by CEN on 11 February 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2871-2:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 2871-2:2010
EN ISO 2871-2:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 2871-2:2010
EN ISO 2871-2:2010 (E)
Foreword
This document (EN ISO 2871-2:2010) has been prepared by Technical Committee ISO/TC 91 "Surface active
agents" in collaboration with Technical Committee CEN/TC 276 “Surface active agents” the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2010, and conflicting national standards shall be withdrawn at
the latest by August 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2871-2:1994.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 2871-2:2010 has been approved by CEN as a EN ISO 2871-2:2010 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 2871-2:2010

---------------------- Page: 6 ----------------------

SIST EN ISO 2871-2:2010

INTERNATIONAL ISO
STANDARD 2871-2
Second edition
2010-02-15


Surface active agents — Detergents —
Determination of cationic-active matter
content —
Part 2:
Cationic-active matter of low molecular
mass (between 200 and 500)
Agents de surface — Détergents — Détermination de la teneur en
matière active cationique —
Partie 2: Matière active cationique à faible masse moléculaire (entre
200 et 500)




Reference number
ISO 2871-2:2010(E)
©
ISO 2010

---------------------- Page: 7 ----------------------

SIST EN ISO 2871-2:2010
ISO 2871-2:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2010 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 2871-2:2010
ISO 2871-2:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 2871-2 was prepared by Technical Committee ISO/TC 91, Surface active agents.
This second edition cancels and replaces the first edition (ISO 2871-2:1990), of which it constitutes a minor
revision.
ISO 2871 consists of the following parts, under the general title Surface active agents — Detergents —
Determination of cationic-active matter content:
⎯ Part 1: High-molecular-mass cationic-active matter
⎯ Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
© ISO 2010 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 2871-2:2010

---------------------- Page: 10 ----------------------

SIST EN ISO 2871-2:2010
INTERNATIONAL STANDARD ISO 2871-2:2010(E)

Surface active agents — Detergents — Determination of
cationic-active matter content —
Part 2:
Cationic-active matter of low molecular mass (between 200
and 500)
1 Scope
This part of ISO 2871 specifies a method for the determination of low-molecular-mass cationic-active
materials such as monoamines, amine oxides, quaternary ammonium compounds and alkylpyridinium salts
which have a main chain of 10 to 22 carbon atoms and not more than 6 other carbon atoms in the cation.
The method is also suitable for other cationic-active materials.
The method is applicable to solids or to aqueous solutions of the active material when the relative molecular
mass of the cationic-active matter is known or when it has been previously determined if its content is
expressed as a percentage by mass. If more than one type of cationic-active material is present, an estimate
of average relative molecular mass may be used.
The method is not applicable if anionic and/or amphoteric surface active agents are present.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.