Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans

This European Standard deals with the safety of electrically operated commercial boiling pans not intended for household use. The rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances. Appliances which are within the scope of this standard are typically used in restaurants, canteens, hospitals and commercial enterprises such as bakeries, butcheries,etc.

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-47: Besondere Anforderungen für elektrische Kochkessel für den gewerblichen Gebrauch

Appareils électrodomestiques et analogues - Sécurité - Partie 2-47: Exigences particulières pour les marmites électriques à usage collectif

Gospodinjski in podobni električni aparati - Varnost - 2-47. del: Posebne zahteve za komercialne električne kotle - Dopolnilo AA

Ta evropski standard obravnava varnost električno gnanih komercialnih kuhalnih kotlov, ki niso namenjeni za gospodinjsko uporabo. Nazivna napetost ne presega 250 V za enofazne naprave, priključene med eno fazo in nevtralnim vodnikom, in 480 V za druge naprave. Naprave, ki so v okviru tega standarda, se običajno uporabljajo v restavracijah, menzah, bolnišnicah in komercialnih podjetjih, kot so pekarne, mesnice itd.

General Information

Status
Not Published
Public Enquiry End Date
30-Jul-2026
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
18-Jun-2026
Due Date
05-Nov-2026

Buy Documents

Draft

oSIST prEN IEC 60335-2-47:2026/oprAA:2026

English language (19 pages)
Preview
Preview
e-Library read for
1 day

Relations

Effective Date
07-Apr-2025

Buy Documents

Draft

oSIST prEN IEC 60335-2-47:2026/oprAA:2026

English language (19 pages)
Preview
Preview
e-Library read for
1 day

Frequently Asked Questions

oSIST prEN IEC 60335-2-47:2026/oprAA:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans". This standard covers: This European Standard deals with the safety of electrically operated commercial boiling pans not intended for household use. The rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances. Appliances which are within the scope of this standard are typically used in restaurants, canteens, hospitals and commercial enterprises such as bakeries, butcheries,etc.

This European Standard deals with the safety of electrically operated commercial boiling pans not intended for household use. The rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances. Appliances which are within the scope of this standard are typically used in restaurants, canteens, hospitals and commercial enterprises such as bakeries, butcheries,etc.

oSIST prEN IEC 60335-2-47:2026/oprAA:2026 is classified under the following ICS (International Classification for Standards) categories: 97.040.20 - Cooking ranges, working tables, ovens and similar appliances. The ICS classification helps identify the subject area and facilitates finding related standards.

oSIST prEN IEC 60335-2-47:2026/oprAA:2026 has the following relationships with other standards: It is inter standard links to oSIST prEN IEC 60335-2-47:2026. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

oSIST prEN IEC 60335-2-47:2026/oprAA:2026 is associated with the following European legislation: EU Directives/Regulations: 2014/35/EU, 2014/53/EU, 2023/1230; Standardization Mandates: M/511, M/536, M/605. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

oSIST prEN IEC 60335-2-47:2026/oprAA:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2026
Gospodinjski in podobni električni aparati - Varnost - 2-47. del: Posebne zahteve
za komercialne električne kotle - Dopolnilo AA
Household and similar electrical appliances - Safety - Part 2-47: Particular requirements
for commercial electric boiling pans
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-47:
Besondere Anforderungen für elektrische Kochkessel für den gewerblichen Gebrauch
Appareils électrodomestiques et analogues - Sécurité - Partie 2-47: Exigences
particulières pour les marmites électriques à usage collectif
Ta slovenski standard je istoveten z: prEN IEC 60335-2-47:2026/prAA:2026
ICS:
97.040.20 Štedilniki, delovni pulti, Cooking ranges, working
pečice in podobni aparati tables, ovens and similar
appliances
oSIST prEN IEC 60335-2- en
47:2026/oprAA:2026
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-47:2026
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
June 2026
ICS 97.040.20 -
English Version
Household and similar electrical appliances - Safety - Part 2-47:
Particular requirements for commercial electric boiling pans
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-47: Exigences particulières pour les marmites ähnliche Zwecke - Teil 2-47: Besondere Anforderungen für
électriques à usage collectif elektrische Kochkessel für den gewerblichen Gebrauch
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 60335-2-47:2026; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2026-09-04.

It has been drawn up by CLC/TC 61.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 81692 Ref. No. prEN IEC 60335-2-47:2026/prAA:2026 E

12 Contents Page
13 European foreword . 3
14 1 Modification to the Introduction . 4
15 2 Modification to clause “1 Scope” . 4
16 3 Modification to clause “2 Normative references” . 4
17 4 Modification to clause “3 Term and definitions” . 5
18 5 Modification to Clause 5, “Term and definitions” . 5
19 6 Modification to Clause 7, “Marking and instructions” . 5
20 7 Modification to Clause 11 “Heating”. 6
21 8 Modification to Clause 15, “Stability and mechanical hazards” . 6
22 9 Modification to Clause 18, “Endurance” . 6
23 10 Modification to Clause 19, “ Abnormal operation” . 6
24 11 Modification to clause “22 Construction” . 7
25 12 Modification to clause “25 Supply connection and external flexible cords” . 8
26 13 Modification to clause “29 Clearances, creepage distances and solid insulation” . 8
27 14 Modification to Annexes . 8
28 15 Modification to Bibliography . 19
30 European foreword
31 This document (prEN IEC 60335-2-47:2026/prAA:2026) consists of the text prepared by CLC/TC 61 “Safety
32 of household and similar electrical appliances”.
33 This document is currently submitted to Public Enquiry.
34 The following dates are proposed:
• latest date by which the existence of this (doa) dav + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
latest date by which the national standards dav + 36 months
• (dow)
conflicting with this document have to be (to be confirmed or
withdrawn
modified when voting)
35 This document will modify prEN IEC 60335-2-47:2026 and all its amendments and corrigenda (if any).
36 prEN IEC 60335-2-47:2026/prAA:2026 includes the following significant technical modifications:
37 — introduce requirements and instruction for children, people with disabilities and domestic animals;
38 — introduce requirements for power driven moving parts;
39 — introduce mechanical test set-up clarifications;
40 — introduce the hygienic requirements;
41 — introduce ergonomic requirements.
42 This document is read in conjunction with prEN IEC 60335-2-47:2026 and
43 prEN IEC 60335-2-47:2026/prA1:2026.
44 The numbering system for European clauses, subclauses, notes, tables, figures and annexes that are
45 additional to those in the IEC standard are prefixed with the letter “Z”.
46 This document has been prepared under a standardization request addressed to CENELEC by the European
47 Commission. The Standing Committee of the EFTA State subsequently approves these requests for its
48 Member States.
49 For the relationship with EU legislation, see informative Annexes ZZA, ZZB and ZZC, which are an integral
50 part of this document.
Secretary’s note: The text contained in the Secretary’s notes will be removed from the standard before
publication, as it is provided solely to inform stakeholders about the reasons for introducing the European
common modifications.
Secretary’s Note: The above sentence in lines 48/49 will be removed when the BT approves the removal
of the link to legislation.
51 1 Modification to the Introduction
52 In the fourth paragraph, delete the term “manufacturer's”
53 2 Modification to clause “1 Scope”
54 Replace fifth paragraph starting with “As far as is practicable…” with the following:
55 “This standard deals with the reasonably foreseeable hazards of intended use presented by appliances and
56 machines, which are encountered by all persons and domestic animals in and around the installation place
57 or workplace.”
58 Convert the paragraph starting with “Attention is drawn to the…” into a note.
59 Addition:
60 With European Amendment A11 the
61 EN 60335-2-47:2003+corrigendumSep:2007+A1:2008+A11:2012+A2:2019+A12:2024 is superseded.
62 This European Amendment A11, supplements or modifies the corresponding clauses of the standards below:
63 — EN IEC 60335-1:2023 (Part 1)
64 — EN IEC 60335-2-47:2026 (Part 2)
65 The appliance can be combined with a fuel burning function, in which case EN IEC 60335-2-102 and
66 EN IEC 60335-2-47 covers the electrical safety and some other safety aspects. All safety aspects related to
67 the use of fuel-burning gas are covered by the relevant product standard for fuel-burning appliances.
Secretary’s note: the above sentence has been modified in base of the HAS comment.
68 For the purpose of this document, the term “appliance” includes the term “machine” where applicable.
69 Additional requirements for appliances with power driven moving parts are given in Annex ZE.
70 This document does not deal with any specific requirements on noise emitted from these appliances the
71 generated noise is not considered to be a relevant hazard. Thus, the emission sound pressure level LpA is
72 considered to be LpA ≤ 70 dB(A).
73 This document contains requirements for appliances with radio function, remote communication, and
74 remote operation.
75 For the scope of this document, the term “radio appliance” is used with the same meaning of “radio
76 equipment”.
77 For the scope of this document, the term “appliance” is used with the same meaning of “equipment”.
78 Compliance with this Part 2 when used together with the Part 1 provides one means of conformity with the
79 safety objectives as listed in Table ZZA.1, Table ZZB.1 and Table ZZC.1.”
80 3 Modification to clause “2 Normative references”
81 Addition:
82 EN 1672-2:2020, Food processing machinery - Basic concepts - Part 2: Hygiene and cleanability
83 requirements
As impacted by EN IEC 60335-1:2023/A11:2023 and EN IEC 60335-1:2023/prAB:2026.
As impacted by EN IEC 60335-2-47:2026/prA1:2026.

84 EN IEC 60335-1:2023, Household and similar electrical appliances - Safety - Part 1: General requirements
85 4 Modification to clause “3 Term and definitions”
86 3.1.9 Modification:
87 Replace “manufacturer's” with “user’s”.
88 3.1.101 Modification:
89 Delete “by the manufacturer”.
90 5 Modification to Clause 5, “Term and definitions”
91 5.103 Modification:
92 Replace “manufacturer's” with “user’s”.
93 6 Modification to Clause 7, “Marking and instructions”
94 7.12 Modification
95 Replace the fourth paragraph starting with “This appliance is not intended for use by persons (including
96 children)…” with the following:
97 “For appliances intended to be used in the area open to the public, the instructions shall state the substance
98 of the following:
99 — People with disabilities can use this appliance but may need additional precautions to be taken. This
100 appliance may be used by persons with reduced physical, sensory or mental capabilities, or lack of
101 experience and knowledge, when they have been given supervision or instruction concerning use of the
102 appliance by a person responsible for their safety.
103 — This appliance may be used by children from the age 8 years if they are continuously supervised.
104 — Children and domestic animals should be supervised to ensure that they do not play with the appliance.
105 — Do not let cord hang over edge of table or counter when appliance is left unattended.
106 — Keep the appliance out of reach of domestic animals and children aged less than 8 years.
107 — Check that there are no domestic animals inside the compartment/cavity of the appliance before use.
108 — Cleaning and user maintenance shall not be carried out by children.
109 For other appliances, the instructions shall state the substance of the following:
110 — This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities,
111 or lack of experience and knowledge, unless they have been given supervision or instruction concerning
112 use of the appliance by a person responsible for their safety.”
113 In the addition, add after “IEC 60417-5021 (2002-10)” the following “, ISO 7000-0434A (2004-01)”.
114 In the addition, replace the sentence starting with “If the manufacturer.” with the following:
115 “If the intended use of the appliance shall be limited to less than the above, this shall be clearly stated in the
116 instructions.”
117 Delete the modification starting with “The instruction concerning persons (including children)…”
118 Add the following:
As impacted by EN IEC 60335-1:2023/A11:2023 and EN IEC 60335-1:2023/prAB:2026.
119 “The instructions shall also state
120 — the intended use of the appliance as covered by the scope of this document;
121 — instructions regarding user maintenance and operation of the appliance and, if necessary, instructions
122 for the training of operators;
123 — instructions designed to enable adjustment and maintenance to be carried out safely, including the
124 protective measures that should be taken during these operations;
125 — the conditions under which the appliance is stable during use, dismantling when out of use, testing or
126 foreseeable breakdowns;
127 — the operating method to be followed in the event of accident or breakdown to prevent unsafe actions;
128 — information regarding the use of personal protection equipment in case of spreading hot food stuff;
129 — Warning concerning possible slippery floor adjacent to the appliance;
130 — the maximum weight of the empty appliance.”
131 7.12.1 Add the following:
132 “The instructions shall state that any repairs shall be carried out by competent persons.
133 The instructions for table-top appliances shall state that a support is needed so that the working height of the
134 appliance is between 695 and 980 mm.”
135 7 Modification to Clause 11 “Heating”
136 11.2 Modification:
137 Delete “manufacturer’s”.
138 11.3 Modification:
139 Delete the sentence “Any measuring instrument giving the same results as the probe may be used.”.
140 11.7 Modification:
141 Replace “by the manufacturer” with “in the instruction”.
142 8 Modification to Clause 15, “Stability and mechanical hazards”
143 15.2 Modification:
144 Replace “by the manufacturer” with “in the instruction or marked on the appliance”.
145 15.101 Modification:
146 Replace “by the manufacturer” with “in the instruction or marked on the appliance”.
147 9 Modification to Clause 18, “Endurance”
148 Replace the sentence Part 2 with “This clause of Part 1 is not applicable”.
149 10 Modification to Clause 19, “ Abnormal operation”
150 19.1 Modification:
151 Replace “manufacturer's” with “user’s”.
152 11 Modification to clause “22 Construction”
153 22.13 Add the following after the first paragraph:
154 Lids shall be equipped with at least one handle, if not motorized.
155 22.48 Addition
156 After the first paragraph, add the following:
157 “For appliances within the scope of this document without cleaning system, Fluid Category is 2 according to
158 EN 61770:2009 .
159 For appliances within the scope of this document with cleaning system, Fluid Category is 3 according to
160 EN 61770:2009 .”
161 22.109 Add the following as a second paragraph:
162 “This requirement is met, if:
163 — the hinge incorporates a click stop; or
164 — the lid is counter balanced; or
165 — the lid can be opened through an angle of at least 100°.”
166 Replace the compliance criteria with the following:
167 “Compliance is checked by applying a force of 20 N in the most unfavourable position and direction to the
168 raised lid. The lid shall not fall back to its operating position.”
169 Add the following note:
170 “NOTE Z101 Lids that can be opened through an angle of at least 100°, even if placed against a wall, are
171 not subjected to this test.”
172 Add the following new subclauses:
173 “
174 22.Z.101 Appliances shall meet the following ergonomic requirements:
175 — The working height of the appliance shall be between 695 and 980 mm (see also 7.12.1),
176 — Operator controls shall be:
177 — clearly visible and identifiable;
178 — positioned within easy reach of the operator's hand;
179 — secured against accidental actuation, if their actuation could result in a hazard.”
180 Compliance is checked by inspection.
181 NOTE Guidance can be found in EN 614-1 and EN 614-2.
182 22.Z.102 Appliances shall meet hygiene requirements.
183 Compliance is checked by inspection and by the requirements of Annex ZAA.”

As impacted by EN 61770:2009/AC:2011, EN 61770:2009/A11:2018, EN 61770:2009/A1:2019,
EN 61770:2009/A12:2022, EN 61770:2009/AC:2023 and EN 61770:2009/A13:2026.
184 12 Modification to clause “25 Supply connection and external flexible cords”
185 25.3 Modification:
186 Replace “manufacturer's” with “user’s”.
187 13 Modification to clause “29 Clearances, creepage distances and solid
188 insulation”
189 29.2 Modification:
190 Replace “unlikely to be” with “not”.
191 14 Modification to Annexes
192 The annexes of Part 1 and Part 2 are applicable except as follows:
193 Annex ZA
194 (normative)
196 Normative references to international publications with their
197 corresponding European publications
198 The following documents are referred to in the text in such a way that some or all of their content constitutes
199 requirements of this document. For dated references, only the edition cited applies. For undated references,
200 the latest edition of the referenced document (including any amendments) applies.
201 NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
202 relevant EN/HD applies.
203 NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
204 www.cencenelec.eu.
Publication Year Title EN/HD Year
Addition:
IEC 60584-1 - Thermocouples – Part 1: EMF specifications and EN 60584-1 2013
tolerances
ISO 898-1 - Mechanical properties of fasteners made of carbon EN ISO 898-1 2013
steel and alloy steel – Part 1: Bolts, screws and studs
+ AC 2013
with specified property classes – Coarse thread and
fine pitch thread
ISO 3506-1 - Mechanical properties of corrosion-resistant EN ISO 3506-1 2020
stainless steel fasteners – Part 1: Bolts, s
...