SIST EN 16383:2017
(Main)Thermal insulation products for building applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS)
Thermal insulation products for building applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS)
This European Standard specifies the equipment and procedures for determining the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS) delivered as a kit and used as thermal insulation for buildings.
Wärmedämmstoffe für das Bauwesen - Bestimmung des hygrothermischen Verhaltens von außenseitigen Wärmedämm-Verbundsystemen mit Putzen (WDVS)
Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung des hygrothermischen Verhaltens von außenseitigen Wärmedämm-Verbundsystemen mit Putzen (WDVS) fest, die als Bausatz geliefert und für die Wärmedämmung an Gebäuden verwendet werden.
Produits isolants thermiques pour le bâtiment - Détermination du comportement hygrothermique des systèmes d'isolation thermique extérieure par enduit sur isolant (ETICS)
La présente Norme européenne spécifie l'équipement et les modes opératoires permettant de déterminer le comportement hygrothermique des systèmes d'isolation thermique extérieure par enduit sur isolant (ETICS), livrés sous forme de kits et utilisés pour l'isolation thermique des bâtiments.
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje obnašanja higrotermičnih zunanjih sestavljenih toplotnoizolacijskih sistemov z ometi (ETICS)
Ta evropski standard določa opremo in postopke za ugotavljanje obnašanja higrotermičnih zunanjih sestavljenih toplotnoizolacijskih sistemov z ometi (ETICS), dobavljenih kot sklop, ki se uporabljajo kot toplotna izolacija za stavbe.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wärmedämmstoffe für das Bauwesen - Bestimmung des hygrothermischen Verhaltens von außenseitigen Wärmedämm-Verbundsystemen mit Putzen (WDVS)Produits isolants thermiques pour le bâtiment - Détermination du comportement hygrothermique des systèmes d'isolation thermique extérieure par enduit sur isolant (ETICS)Thermal insulation products for building applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS)91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 16383:2016SIST EN 16383:2017en,fr,de01-januar-2017SIST EN 16383:2017SLOVENSKI
STANDARD
SIST EN 16383:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16383
October
t r s x ICS
{ sä s r rä x r English Version
Thermal insulation products for building applications æ Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders Produits isolants thermiques destinés aux applications du bâtiment æ Détermination du comportement hygrothermique des systèmes d 5isolation thermique
Wärmedämmstoffe für das Bauwesen æ Bestimmung des hygrothermischen Verhaltens von außenseitigen This European Standard was approved by CEN on
x August
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x u z uã t r s x ESIST EN 16383:2017
EN 16383:2016 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Principle . 6 5 Testing devices . 6 6 Test wall . 6 6.1 Preparation of the test wall . 6 6.1.1 General . 6 6.1.2 Test wall with one opening . 6 6.1.3 Test wall with two openings . 7 6.2 Conditioning of the test wall . 8 7 Testing the hygrothermal behaviour of the test wall. 9 8 Assessment of the test wall after the hygrothermal cycles . 11 9 Test report . 11
SIST EN 16383:2017
EN 16383:2016 (E) 3 European foreword This document (EN 16383:2016) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall be withdrawn at the latest by April 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. NOTE It has not been possible to include a statement on the accuracy of the test method in this edition, but it is intended to include such a statement when this European Standard is next revised. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16383:2017
EN 16383:2016 (E) 4 1 Scope This European Standard specifies the equipment and procedures for determining the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS) delivered as a kit and used as thermal insulation for buildings. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications — Determination of length and width EN 823, Thermal insulating products for building applications — Determination of thickness EN 998-1, Specification for mortar for masonry — Part 1: Rendering and plastering mortar EN 1015-1, Methods of test for mortar for masonry — Part 1: Determination of particle size distribution (by sieve analysis) EN 1062-1, Paints and varnishes — Coating materials and coating systems for exterior masonry and concrete — Part 1: Classification EN 1607, Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces EN 1609, Thermal insulating products for building applications — Determination of short term water absorption by partial immersion EN 13494, Thermal insulation products for building applications — Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material EN 13496, Thermal insulation products for building applications — Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS) EN 13497, Thermal insulation products for building applications — Determination of the resistance to impact of external thermal insulation composite systems (ETICS) EN 15824, Specifications for external renders and internal plasters based on organic binders EN ISO 3251, Paints, varnishes and plastics — Determination of non-volatile-matter content (ISO 3251) EN ISO 3451-1, Plastics - Determination of ash — Part 1: General methods (ISO 3451-1) EN ISO 9229, Thermal insulation — Vocabulary (ISO 9229) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 9229 and the following apply. SIST EN 16383:2017
EN 16383:2016 (E) 5 3.1 adhesive component used for bonding the thermal insulation product to the substrate 3.2 base coat component applied directly by rendering on to the thermal insulation product 3.3 design external thermal insulation composite system design ETICS combination of components defined by the system holder, consisting of one base coat, thermal insulation product(s) of the same material, adhesive(s), reinforcement(s) and finishing layer(s) with or without mechanical fixing device(s) 3.4 finishing layer finishing coat with a key coat (optional) and/or a decorative coat (optional) 3.5 anchor for thermal insulation products fixing device consisting of a plate for fixing the thermal insulation product and if appropriate also the reinforced base coat, a sleeve which passes through the thermal insulation product and a part which is embedded to the substrate 3.6 anchor for profiles or rails fixing device for fixing the profiles or rails to the substrate 3.7 mechanical fixing device component used for fixing a kit mechanically to the substrate 3.8 reinforced base coat base coat with embedded reinforcement 3.9 substrate part of the wall/test assembly to which the kit is fixed 3.10 test wall substrate covered by a kit or set of kits to test the hygrothermal behaviour 3.11 system holder single manufacturer who is placing kits out of a design ETICS on the market 3.12 key coat component applied to the base coat as a preparation for the application of the finishing coat SIST EN 16383:2017
EN 16383:2016 (E) 6 4 Principle Exposure of a kit to a set of hygrothermal cycles, consisting of heating, wetting, cooling and freeze/thaw cycles. 5 Testing devices The following test devices are necessary: — device for heating the surface of the assembled kit regulated to (70 ± 5) °C and maintaining the relative humidity of the air close to the surface of the kit to less than 30 %; — device for wetting the surface of the kit with tap or demineralized or deionized water with a temperature of (15 ± 5) °C and an amount of (1,5 ± 0,5) l/(m2 · min) with the use of spraying nozzles to ensure uniform water distribution; —
± 5) °C. These devices shall meet the required test conditions described in Clause 7. 6 Test wall 6.1 Preparation of the test wall 6.1.1 General The kit(s) shall be applied on the substrate according to the instructions of the system holder. The configuration of the kit(s) to be tested shall be according to the worst case rules given in the relevant product standard. The thermal insulation product shall be fixed to the substrate and covered by the reinforced base coat. The perimeter edges of the test wall shall be wrapped/covered with the reinforced base coat. The upper 2/3 of the height of the test wall shall be covered additionally with one or more finishing layers according to Figure 1 and Figure 2. Within the lower 1/3 from the bottom edge shall be at least one horizontal joint between thermal insulation products (see “a” in Figure 1 and Figure 2). The distance between the horizontal joint and the 1/3 of the height of the test wall (see “b” in Figure 1 and Figure 2) shall be at least 200 mm. If the height of the thermal insulation product is bigger than 1/3 of the height of the test wall minus 200 mm, the thermal insulation product shall be cut properly. The test wall shall have openings according to 6.1.2 or 6.1.3. NOTE If given in the worst case rules of the relevant product standard, the whole test wall can be covered by finishing
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.