Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)

This part of prEN 12318 specifies the characteristics of the fitness for purpose of crosslinked polyethylene (PE-X) piping systems, intended to be used for hot and cold water installations within buildings, and for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures according to the class of application (see table 1 of prEN 12318-1:1999). This standard covers a range of service conditions (application classes) and design pressure classes.

Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Vernetztes Polyethylen (PE-X) - Teil 5: Gebrauchstauglichkeit des Systems (ISO 15875-5:2003)

Dieser Teil der EN (155wi023) legt die Anforderungen zur Gebrauchstauglichkeit von vernetztem Polyethylen (PE-X)-Rohrleitungssytemen für die Verlegung von Warm- und Kaltwasserleitungen innerhalb und im Umfeld von Gebäuden (Hausinstallations- und Heizungssysteme) fest, für den Transport von Wasser, welches für den menschlichen Gebrauch bestimmt ist oder nicht, unter Betriebsdrücken und Temperaturen entsprechend der Anwendungsklasse.

Systemes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthyene réticulé (PE-X) - Partie 5: Aptitude a l'emploi du systeme (ISO 15875-5:2003)

La présente partie de l'EN (155wi023) spécifie les caractéristiques d'aptitude a l'emploi des systemes de canalisations en polyéthylene réticulé (PE-X) destiné a des installations d'eau chaude et froide a l'intérieur et autour de bâtiments (systemes domestiques) ainsi qu'au transport de l'eau, destinée ou non a la consommation humaine, a des pressions et des températures de service correspondant a la classe d'application.

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)

General Information

Status
Published
Publication Date
30-Apr-2004
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2004
Due Date
01-May-2004
Completion Date
01-May-2004

Relations

Buy Standard

Standard
EN ISO 15875-5:2004
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15875-5:2004
01-maj-2004
Plastics piping systems for hot and cold water installations - Crosslinked
polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene
(PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Vernetztes
Polyethylen (PE-X) - Teil 5: Gebrauchstauglichkeit des Systems (ISO 15875-5:2003)
Systemes de canalisations en plastique pour les installations d'eau chaude et froide -
Polyéthyene réticulé (PE-X) - Partie 5: Aptitude a l'emploi du systeme (ISO 15875-
5:2003)
Ta slovenski standard je istoveten z: EN ISO 15875-5:2003
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN ISO 15875-5:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.