SIST EN 60205:2006/A1:2009

Calculation of the effective parameters of magnetic piece parts (IEC 60205:2006/A1:2009)

Berechnung der effektiven Kernparameter magnetischer Formteile (IEC 60205:2006/A1:2009)

Calcul des paramètres effectifs des pièces ferromagnétiques (CEI 60205:2006/A1:2009)

Izračun efektivnih parametrov magnetnih sestavnih delov (IEC 60205:2006/A1:2009)

General Information

• Status: Withdrawn
• Publication Date: 22-Feb-2009
• Withdrawal Date: 11-Mar-2020
• ICS: 29.100.10 - Magnetic components
• Technical Committee: IMKF - Magnetic components and ferrite materials
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 12-Mar-2020
• Due Date: 04-Apr-2020
• Completion Date: 12-Mar-2020
• Ref Project: EN 60205:2006/A1:2009 - Calculation of the effective parameters of magnetic piece parts

Relations

• Replaced By: SIST EN 60205:2017 - Calculation of the effective parameters of magnetic piece parts
• Effective Date: 21-Mar-2017
• Amends: SIST EN 60205:2006 - Calculation of the effective parameters of magnetic piece parts
• Effective Date: 01-Apr-2009
• Amends: SIST EN 60205:2006 - Calculation of the effective parameters of magnetic piece parts
• Effective Date: 29-Jan-2023
• Revised: SIST EN 60205:2017 - Calculation of the effective parameters of magnetic piece parts
• Effective Date: 19-Jan-2016
• Amends: SIST EN 60205:2006 - Calculation of the effective parameters of magnetic piece parts
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60205:2006/A1:2009
01-april-2009
,]UDþXQHIHNWLYQLKSDUDPHWURYPDJQHWQLKVHVWDYQLKGHORY,(&
$
Calculation of the effective parameters of magnetic piece parts (IEC
60205:2006/A1:2009)
Berechnung der effektiven Kernparameter magnetischer Formteile (IEC
60205:2006/A1:2009)
Calcul des paramètres effectifs des pièces ferromagnétiques (CEI 60205:2006/A1:2009)
Ta slovenski standard je istoveten z: EN 60205:2006/A1:2009
ICS:
29.100.10 Magnetne komponente Magnetic components
SIST EN 60205:2006/A1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60205:2006/A1:2009

---------------------- Page: 2 ----------------------

SIST EN 60205:2006/A1:2009

EUROPEAN STANDARD
EN 60205/A1

NORME EUROPÉENNE
February 2009
EUROPÄISCHE NORM

ICS 29.100.10


English version


Calculation of the effective parameters of magnetic piece parts
(IEC 60205:2006/A1:2009)


Calcul des paramètres effectifs  Berechnung der effektiven Kernparameter
des pièces ferromagnétiques magnetischer Formteile
(CEI 60205:2006/A1:2009) (IEC 60205:2006/A1:2009)




This amendment A1 modifies the European Standard EN 60205:2006; it was approved by CENELEC on
2009-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60205:2006/A1:2009 E

---------------------- Page: 3 ----------------------

SIST EN 60205:2006/A1:2009
EN 60205:2006/A1:2009 – 2 –
Foreword
The text of document 51/928A/CDV, future amendment 1 to IEC 60205:2006, prepared by IEC TC 51,
Magnetic components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as amendment A1 to EN 60205:2006 on 2009-02-01.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2009-11-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2012-02-01
__________
Endorsement notice
The text of amendment 1:2009 to the International Standard IEC 60205:2006 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60205:2006/A1:2009
IEC 60205
®
Edition 3.0 2009-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Calculation of the effective parameters of magnetic piece parts

Calcul des paramètres effectifs des pièces magnétiques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
F
...