SIST EN 301 908-1 V3.2.1:2007

• Abstract:

  The present document applies to the following radio equipment types:; • User equipment, repeaters and base stations for IMT-2000, except for IMT-2000 FDMA/TDMA (DECT), falling within the scope of one of the following parts of EN 301 908, and ancillary equipment which is intended to be used together with it.; NOTE 1: EN 301 908-10 [9] contains requirements for radiated spurious emissions and control and monitoring functions applicable to IMT-2000 FDMA/TDMA (DECT) equipment.; The present document includes technical requirements which are common to equipment falling within the scope of several of the following parts.; NOTE 2: The following parts of EN 301 908, which are listed in the foreword of the present document, specify technical requirements in respect of a particular class of IMT-2000 equipment. NOTE 3: ITU-R Recommendation M.1457-5 [4] defines the characteristics of the members of the IMT-2000 family by means of references to technical specifications developed by Standards Development organizations. The present document applies to equipment designed to meet any version of the terrestrial specifications referenced in ITU-R Recommendation M.1457-5 [4]. The present document is intended to cover the provisions of Directive 1999/5/EC [1] article 3.2, which states that … radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference. In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document.

• Status: Published
• Publication Date: 05-Nov-2007
• ICS: 33.060.99 - Other equipment for radiocommunications
• ICS: 33.100.01 - Electromagnetic compatibility in general
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 25-Oct-2007
• Due Date: 30-Dec-2007
• Completion Date: 06-Nov-2007
• Directive: 1999/5/EC - Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity
• Directive:

  ---

  2005-01-1864 - Pravilnik o radijskih frekvencah, ki se smejo uporabljati brez odločbe o dodelitvi radijskih frekvenc
• Mandate: M/284
• Ref Project: ETSI EN 301 908-1 V3.2.1 (2007-05) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive

• Official Journal Project Relation: SIST EN 301 908-1 V2.2.1:2004 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive
• Effective Date: 25-Jan-2010

SIST EN 301 908-1 V3.2.1:2007 is the Slovenian adoption of ETSI EN 301 908-1 V3.2.1, a harmonized European standard for International Mobile Telecommunications 2000 (IMT-2000) third-generation cellular networks. It sets common electromagnetic compatibility and radio spectrum requirements for user equipment (UE), base stations (BS) and repeaters, and it supports the essential requirements of article 3.2 of the R&TTE Directive for effective use of spectrum and avoidance of harmful interference.

What does SIST EN 301 908-1 V3.2.1:2007 specify?

SIST EN 301 908-1 V3.2.1:2007 covers IMT-2000 UE, BS and repeaters, plus ancillary equipment intended to work with them. It is the common part of the EN 301 908 series, so it applies across several IMT-2000 equipment classes and points readers to the more specific companion parts.

The scope excludes IMT-2000 FDMA/TDMA (DECT), which is handled in another part of the series. The document also states that it applies to equipment designed to meet any version of the terrestrial specifications referenced in ITU-R Recommendation M.1457-5.

The standard is organized into these main clauses and annexes:

Part	Content
Clause 1	Scope
Clause 2	References
Clause 3	Definitions and abbreviations
Clause 4	Technical requirements specifications
Clause 5	Testing for compliance with technical requirements
Annex A	HS Requirements and conformance Test specifications Table (HS-RTT)
Annex B	Receiver sensitivity and correct operation of the equipment
Annex C	The EN title in the official languages
Annex D	Bibliography

What are the key requirements of SIST EN 301 908-1 V3.2.1:2007?

SIST EN 301 908-1 V3.2.1:2007 focuses on three essential radio requirements: radiated emissions for UE, radiated emissions for BS and repeaters, and UE control and monitoring functions. In practice, a manufacturer or test lab uses these clauses to check that an IMT-2000 product limits unwanted emissions and does not transmit when it should not.

Scope and operating conditions

Clause 4.1 ties the technical requirements to the environmental profile defined in the applicable part. That means the equipment has to meet the relevant requirements throughout its declared operating conditions, not only in one laboratory setup.

Clause 4.2 also assumes the operating band may be shared between IMT-2000 systems or compatible systems. This matters because the standard is aimed at coexistence: the equipment must be tested and assessed in a way that reflects shared-spectrum operation.

Radiated emissions from UE

Clause 4.2.2 requires UE to limit unwanted emissions from the enclosure port. The detailed limits are given in table 3, and the test applies to the radio equipment itself and, where relevant, a representative configuration of ancillary equipment.

For UE, emissions are assessed in both traffic mode and idle mode. That matters because a handset or terminal can behave differently when connected to a network compared with when it is switched on but not connected.

Radiated emissions from BS and repeaters

Clause 4.2.3 covers BS and repeaters. The test is performed on a representative configuration of the equipment under test, and the equipment is driven in a way that reflects normal transmission, with the base station at maximum declared power or the repeater set to maximum declared gain and output power.

This clause is the main check that a BS or repeater does not create harmful spurious emissions. The limits are given in table 4, and they vary with frequency range and with the IMT-2000 radio interface family.

UE control and monitoring functions

Clause 4.2.4 checks that UE control and monitoring functions prevent transmission when there is no valid network. The test arrangement monitors the antenna connector while the UE is switched on and off in a sequence, then compares the maximum observed power with the limit in clause 4.2.4.2.

In practice, this is the part of the standard that verifies that a UE does not keep radiating when it should be inactive. That is important for spectrum protection and for avoiding unintended interference from terminals outside network control.

Test method, uncertainty and reporting

Clause 5.1 requires testing at representative points within the operational environmental profile, and normally under normal test conditions unless stated otherwise. Clause 5.2 requires the test report to include measurement uncertainty and says that the uncertainty must be calculated in line with ETSI TR 100 028 using an expansion factor of 1.96.

This means test houses have to document not just the measured value but also the uncertainty attached to it. That is important for consistent pass or fail decisions, especially near a limit.

Essential radio test suites and Annex A

Clause 5.3 gives the test suites for the three essential requirements. The UE emission test uses substitution measurement as the reference method and calls for orthogonal polarization checks. The BS and repeater emission test uses a test site meeting ITU-R Recommendation SM.329 and measures spurious components with the equipment set up for realistic transmission.

Annex A maps each essential requirement to its test specification in the HS Requirements and conformance Test specifications Table (HS-RTT). For conformity assessment, that table is the quick route from a requirement to the exact test clause.

What terms does SIST EN 301 908-1 V3.2.1:2007 define?

• Ancillary equipment - Equipment used with a UE, repeater or BS to add operating or control features, but not needed for the basic standalone function.
• Applicable part - The EN 301 908 part whose scope covers the equipment being tested.
• Enclosure port - The physical boundary through which electromagnetic fields can radiate from or enter the apparatus.
• Environmental profile - The range of environmental conditions in which the equipment has to comply.
• Idle mode - The UE state when it is switched on but has no Radio Resource Control (RRC) connection.
• Traffic mode - The UE state when it is switched on and has an established RRC connection.
• Radio Resource Control (RRC) - The control layer state used to describe whether the UE is connected to the network.
• e.r.p. / e.i.r.p. - Effective radiated power and equivalent isotropically radiated power, used in the emission tests and related by a fixed offset in the test notes.

Who uses SIST EN 301 908-1 V3.2.1:2007?

SIST EN 301 908-1 V3.2.1:2007 is used by manufacturers of IMT-2000 UE, BS and repeaters, by designers of ancillary equipment, and by test laboratories carrying out EMC and spectrum compliance work. It is also used by quality managers, certification teams and buyers who need to confirm that a product has been assessed against the common IMT-2000 article 3.2 requirements.

In practice, users apply it when they:

• choose the right emission and control tests for a product family
• set up laboratory test configurations for UE, BS or repeaters
• record measurement uncertainty and test conditions in reports
• support conformity assessment under the R&TTE framework

Which standards are used with SIST EN 301 908-1 V3.2.1:2007?

The document relies on a small set of external references that shape its limits and test methods.

• Directive 1999/5/EC (R&TTE Directive) - the legal basis for article 3.2 and the conformity context for the standard.
• ITU-R Recommendation M.1457-5 - defines the IMT-2000 family and the terrestrial radio interface specifications covered by the standard.
• ETSI TR 100 028 - provides the method for calculating measurement uncertainty.
• ITU-R Recommendation SM.329 - supports the treatment of unwanted emissions and the reference test site conditions.
• ITU-R Recommendation SM.1539-1 - supports the boundary between out-of-band and spurious domains.
• ETSI EN 301 908-10 - covers IMT-2000 FDMA/TDMA (DECT), which is called out separately in the scope.

The foreword also places this part within the EN 301 908 family of companion parts for specific IMT-2000 radio interfaces and equipment classes, including UTRA FDD, cdma2000, UTRA TDD, UWC 136, DECT and repeater variants.

What does the SIST EN 301 908-1 V3.2.1:2007 document contain?

SIST EN 301 908-1 V3.2.1:2007 contains cross-reference tables, definitions, emission limits, test methods and conformance rules. It gives the laboratory logic for substitution measurements, antenna polarization checks, representative configurations, and the way to test UE in traffic mode and idle mode.

It also includes the HS-RTT table in Annex A, which is the structured link between each essential requirement and its test specification. Annex B explains why receiver sensitivity and correct operation are discussed in relation to harmful interference, while Annex C provides the title in official languages and Annex D lists bibliography items.

SLOVENSKI STANDARD
01-december-2007
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50%D]QH
SRVWDMH%6SRQDYOMDOQLNLUHSHWLWRUMLLQXSRUDEQLãNDRSUHPD8(]DFHOLþQD
RPUHåMDWUHWMHJHQHUDFLMH,07GHO+DUPRQL]LUDQL(1]D,07XYRGLQ
VSORãQH]DKWHYHNL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS),
Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks -
Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering
essential requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 908-1 Version 3.2.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE) for
IMT-2000 Third-Generation cellular networks;
Part 1: Harmonized EN for IMT-2000,
introduction and common requirements,
covering essential requirements
of article 3.2 of the R&TTE Directive

2 ETSI EN 301 908-1 V3.2.1 (2007-05)

Reference
REN/ERM-TFES-003-1
Keywords
3G, cellular, digital, IMT-2000, mobile, radio,
regulation, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2007.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI EN 301 908-1 V3.2.1 (2007-05)
Contents
Intellectual Property Rights.4
Foreword.4
Introduction .5
1 Scope.6
2 References.6
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.8
4 Technical requirements specifications.8
4.1 Environmental profile.8
4.2 Conformance requirements.9
4.2.1 Introduction.9
4.2.2 Radiated emissions (UE) .9
4.2.2.1 Definition.9
4.2.2.2 Limits.9
4.2.2.3 Conformance.10
4.2.3 Radiated emissions (BS and repeater) .10
4.2.3.1 Definition.10
4.2.3.2 Limits.10
4.2.3.3 Conformance.11
4.2.4 Control and monitoring functions (UE).11
4.2.4.1 Definition.11
4.2.4.2 Limits.11
4.2.4.3 Conformance.11
5 Testing for compliance with technical requirements.11
5.1 Environmental conditions for testing .11
5.2 Interpretation of the measurement results .11
5.3 Essential radio test suites.12
5.3.1 Radiated emissions (UE) .12
5.3.1.1 Test method.12
5.3.1.2 Test configurations.12
5.3.2 Radiated emissions (BS and repeater) .13
5.3.2.1 Test method.13
5.3.2.2 Test configurations.14
5.3.3 Control and monitoring functions (UE).14
5.3.3.1 Test method.14
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-
RTT).16
Annex B (informative): Receiver sensitivity and correct operation of the equipment.18
B.1 Receiver sensitivity.18
B.2 Correct functioning of the equipment.18
Annex C (informative): The EN title in the official languages .19
Annex D (informative): Bibliography.21
History .22

ETSI
4 ETSI EN 301 908-1 V3.2.1 (2007-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ( the "R&TTE Directive" ).
The present document is part 1 of a multi-part deliverable covering the Base Stations (BS), Repeaters and User
Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below:
Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS and Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 10: "Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of
the R&TTE Directive";
Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive";
ETSI
5 ETSI EN 301 908-1 V3.2.1 (2007-05)
Part 12: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeater) covering essential
requirements of article 3.2 of the R&TTE Directive".

National transposition dates
Date of adoption of this EN: 27 April 2007
Date of latest announcement of this EN (doa): 31 July 2007
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2008
Date of withdrawal of any conflicting National Standard (dow): 31 January 2009

Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399.
ETSI
6 ETSI EN 301 908-1 V3.2.1 (2007-05)
1 Scope
The present document applies to the following radio equipment types:
• User equipment, repeaters and base stations for IMT-2000, except for IMT-2000 FDMA/TDMA (DECT),
falling within the scope of one of the following parts of EN 301 908, and ancillary equipment which is
intended to be used together with it.
NOTE 1: EN 301 908-10 [9] contains requirements for radiated spurious emissions and control and monitoring
functions applicable to IMT-2000 FDMA/TDMA (DECT) equipment.
The present document includes technical requirements which are common to equipment falling within the scope of
several of the following parts.
NOTE 2: The following parts of EN 301 908, which are listed in the foreword of the present document, specify
technical requirements in respect of a particular class of IMT-2000 equipment.
NOTE 3: ITU-R Recommendation M.1457-5 [4] defines the characteristics of the members of the IMT-2000 family
by means of references to technical specifications developed by Standards Development organizations.
The present document applies to equipment designed to meet any version of the terrestrial specifications
referenced in ITU-R Recommendation M.1457-5 [4].
The present document is intended to cover the provisions of Directive 1999/5/EC [1] article 3.2, which states that …
radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio
communications and orbital resources so as to avoid harmful interference.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present
document.
NOTE 4: A list of such ENs is included on the web site http://www.newapproach.org.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
[1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[2] Void.
[3] Void.
[4] ITU-R Recommendation M.1457-5 (2006): "Detailed specifications of the radio interfaces of
International Mobile Telecommunications-2000 (IMT-2000)".
ETSI
7 ETSI EN 301 908-1 V3.2.1 (2007-05)
[5] ETSI TR 100 028 (all parts) (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Uncertainties in the measurement of mobile radio equipment characteristics".
[6] ITU-R Recommendation SM.329 (2003): "Unwanted emissions in the spurious domain".
[7] Void.
[8] ITU-R Recommendation SM.1539-1 (2002): "Variation of the boundary between the out-of-band
and spurious domains required for the application of Recommendations ITU-R SM.1541 and
ITU-R SM.329".
[9] ETSI EN 301 908-10 (V2.1.1): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation
cellular networks; Part 10: Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering
essential requirements of article 3.2 of the R&TTE Directive".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [1] and the following
apply:
ancillary equipment: equipment (apparatus), used in connection with a User Equipment (UE), Repeater or Base
Station (BS) is considered as an ancillary equipment (apparatus) if:
• the equipment is intended for use in conjunction with a user equipment UE, repeater or BS to provide
additional operational and/or control features to the radio equipment, (e.g. to extend control to another position
or location); and
• the equipment cannot be used on a stand alone basis to provide user functions independently of a UE, BS or
combination of BS and repeater; and
• the UE, BS or combination of BS and repeater to which it is connected, is capable of providing some intended
operation, such as transmitting and/or receiving without the ancillary equipment (i.e. it is not a sub-unit of the
main equipment essential to the main equipment basic functions).
applicable part: part of the multi-part deliverable, of which the present document is the first part, for which the scope
of that document includes the equipment to be tested
enclosure port: physical boundary of the apparatus through which electromagnetic fields may radiate or impinge
NOTE: In the case of integral antenna equipment, this port is inseparable from the antenna port.
environmental profile: range of environmental conditions under which equipment within the scope of the present
document is required to comply with the provisions of the present document
idle mode: state of User Equipment (UE) when switched on but with no Radio Resource Control (RRC) connection
IMT-2000: third generation mobile systems which are scheduled to start service around the year 2000 subject to market
considerations
NOTE: ITU-R Recommendation M.1457-5 [4] identifies the detailed specifications for the IMT-2000 radio
interfaces.
ETSI
8 ETSI EN 301 908-1 V3.2.1 (2007-05)
port: particular interface, of the specified equipment (apparatus), with the electromagnetic environment
NOTE: For example, any connection point on an equipment intended for connection of cables to or from that
equipment is considered as a port (see figure 1).

Enclosure port
Antenna port
AC Power port
Signal/Control port
DC Power port
Apparatus
Telecommunications port
Earth port
Figure 1: Examples of ports
radio communications equipment: telecommunications equipment which includes one or more transmitters and/or
receivers and/or parts thereof for use in a fixed, mobile or portable application
NOTE: It can be operated with ancillary equipment but if so, is not dependent on it for basic functionality.
signal and control port: port which carries information or control signals, excluding antenna ports
telecommunication port: port which is intended to be connected to telecommunication networks (e.g. public switched
telecommunication networks, integrated services digital networks), local area networks (e.g. Ethernet, token ring) and
similar networks
traffic mode: state of User Equipment (UE) when switched on and with Radio Resource Control (RRC) connection
established
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
BS Base Station
CDMA Code Division Multiple Access
e.i.r.p. equivalent isotropically radiated power
EMC ElectroMagnetic Compatibility
e.r.p. effective radiated power
EUT Equipment Under Test
FDD Frequency Division Duplex
IMT-2000 International Mobile Telecommunications 2000
R&TTE Radio Telecommunications and Terminal Equipment
RF Radio Frequency
RMS Root Mean Square
RRC Radio Resource Control
TDD Time Division Duplex
UE User Equipment
4 Technical requirements specifications
4.1 Environmental profile
The technical requirements of the present document apply under the environmental profile for operation of the
equipment, as defined in the applicable part. The equipment shall comply with all the technical requirements of the
present document at all times when operating within the boundary limits of the operational environmental profile.
ETSI
9 ETSI EN 301 908-1 V3.2.1 (2007-05)
4.2 Conformance requirements
The requirements in the present document are based on the assumption that the operating band is shared between
systems of the IMT-2000 family or systems having compatible characteristics.
4.2.1 Introduction
To meet the essential requirement under article 3.2 of the R&TTE Directive [1] for IMT-2000 equipment three common
essential parameters have been identified. Tables 1 and 2 provide cross-references, for UE, repeater and BS
respectively, between these essential parameters and the corresponding technical requirements for equipment within the
scope of the present document.
Table 1: Cross references for User Equipment (UE)
Essential parameter Corresponding technical requirements
Radiated emissions 4.2.2 Radiated emissions (UE)
Control and monitoring functions 4.2.4 Control and monitoring functions (UE)

Table 2: Cross references for Base Stations (BS), and repeaters
Essential parameter Corresponding technical requirements
Radiated emissions 4.2.3 Radiated emissions (BS and repeater)

NOTE: Receiver sensitivity, use of correct timing and use of correct code are covered in clauses B.1 and B.2
respectively.
4.2.2 Radiated emissions (UE)
4.2.2.1 Definition
This test assesses the ability of radio communications equipment and ancillary equipment to limit unwanted emissions
from the enclosure port.
This test is applicable to radio communications equipment and ancillary equipment.
This test shall be performed on the radio communications equipment and/or a representative configuration of the
ancillary equipment.
4.2.2.2 Limits
The frequency boundary and reference bandwidths for the detailed transitions of the limits between the requirements for
out of band emissions and spurious emissions are based on ITU-R Recommendations SM.329 [6] and
SM.1539-1 [8].
The requirements shown in table 3 are only applicable for frequencies in the spurious domain.
ETSI
10 ETSI EN 301 908-1 V3.2.1 (2007-05)
Table 3: Radiated spurious emissions requirements (UE)
Frequency Minimum Minimum requirement
Applicability
requirement (e.r.p)/ (e.r.p)/
reference reference bandwidth
bandwidth traffic mode
idle mode
-57 dBm/100 kHz -36 dBm/100 kHz All
30 MHz ≤ f < 1 000 MHz
-47 dBm/1 MHz -30 dBm/1 MHz All
1 GHz ≤ f < 12,75 GHz
fc - 12,5 MHz < f < fc + 12,5 MHz Not applicable UTRA FDD
UTRA TDD, 3,84 Mcps option
cdma2000, spreading rate 3
fc - 4 MHz < f < fc + 4 MHz Not applicable UTRA TDD, 1,28 Mcps option
cdma2000, spreading rate 1
fc - 500 kHz < f < fc + 500 kHz Not applicable UWC 136, 200 kHz option
fc - 250 kHz < f < fc + 250 kHz Not applicable UWC 136, 30 kHz option
NOTE: fc is the UE transmit centre frequency.

4.2.2.3 Conformance
Conformance tests described in clause 5.3.1 shall be carried out.
4.2.3 Radiated emissions (BS and repeater)
4.2.3.1 Definition
This test assesses the ability of BS and repeater to limit unwanted emission from the enclosure port.
This test is applicable to base stations and also applicable to repeaters. This test shall be performed on a representative
configuration of the equipment under test.
4.2.3.2 Limits
The frequency boundary and reference bandwidths for the detailed transitions of the limits between the requirements for
out-of-band emissions and spurious emissions are based on ITU-R Recommendations SM.329 [6] and
SM.1539-1 [8].
The requirements, shown in table 4, are applicable for frequencies in the spurious domain.
The BS and repeater shall meet the limits given in table 4.
Table 4: Radiated spurious emissions requirements (BS and repeater)
Frequency Minimum Applicability
requirement (e.r.p)/
reference bandwidth
30 MHz ≤ f < 1 000 MHz -36 dBm/100 kHz All
-30 dBm/1 MHz All
1 GHz ≤ f < 12,75 GHz
Fc1 - 12,5 MHz < f < Fc2 + 12,5 MHz Not applicable UTRA FDD
UTRA TDD, 3,84 Mcps option
cdma2000, spreading rate 3
Fc1 - 4 MHz < f < Fc2 + 4 MHz Not applicable UTRA TDD, 1,28 Mcps option
cdma2000, spreading rate 1
Fc1 - 500 kHz < f < Fc2 + 500 kHz Not applicable UWC 136, 200 kHz option
Fc1 - 250 kHz < f < Fc2 + 250 kHz Not applicable UWC 136, 30 kHz option
NOTE 1: Centre frequency of first carrier frequency used by the BS and repeater.
NOTE 2: Centre frequency of last carrier frequency used by the BS and repeater.

ETSI
11 ETSI EN 301 908-1 V3.2.1 (2007-05)
4.2.3.3 Conformance
Conformance tests described in clause 5.3.2 shall be carried out.
4.2.4 Control and monitoring functions (UE)
4.2.4.1 Definition
This requirement, together with other control and monitoring technical requirements identified in the table of cross
references in the applicable part, verifies that the control and monitoring functions of the UE prevent it from
transmitting in the absence of a valid network.
This test is applicable to radio communications equipment and ancillary equipment.
This test shall be performed on the radio communications equipment and/or a representative configuration of the
ancillary equipment.
4.2.4.2 Limits
The maximum measured power during the duration of the test shall not exceed -30 dBm.
4.2.4.3 Conformance
Conformance tests described in clause 5.3.3 shall be carried out.
5 Testing for compliance with technical requirements
5.1 Environmental conditions for testing
Tests defined in the present document shall be carried out at representative points within the boundary limits of the
operational environmental profile, as defined in clause 4.1.
Where technical performance varies subject to environmental conditions, tests shall be carried out under a sufficient
variety of environmental conditions (within the boundary limits of the declared operational environmental profile) to
give confidence of compliance for the affected technical requirements.
Normall
...