SIST EN 61010-2-031:1995

Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 2-031: Particular requirements for hand-held probe assemblies for electrical measurement and test

Applies to the following hand-held and hand-manipulated probe assemblies: -low-voltage and high-voltage, non-attenuating probe assemblies (type A) -high-voltage attenuating or divider probe assemblies (type B) -low-voltage attenuating or divider probe assemblies (type C). Has the status of a group safety publication in accordance with IEC Guide 104.

Sicherheitsbestimmungen für elektrische Meß-, Steuer-, Regel- und Laborgeräte -- Teil 2-031: Besondere Anforderungen an handgehaltene Meß-, Prüf- und Verbindungsleitungen (Meßzubehör) zum (elektrischen) Messen, Prüfen und Experimentieren

Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire -- Partie 2-031: Prescriptions particulières pour sondes équipées manuelles de mesurage et d'essais électriques

S'applique aux sondes équipées manuelles et manipulables suivantes: - sondes équipées, sans atténuation, à basse tension et à haute tension (type A); - sondes équipées, à atténuateur ou diviseur à haute tension (type B); - sondes équipées à atténuateur ou diviseur à basse tension (type C). A le statut d'une publication groupée de sécurité conformément au Guide 104.

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-031: Particular requirements for hand held probe assemblies for electrical measurement and test (IEC 1010-2-031:1993)

General Information

• Status: Withdrawn
• Publication Date: 31-Jul-1995
• Withdrawal Date: 31-Jan-2005
• ICS: 19.080 - Electrical and electronic testing
• ICS: 71.040.10 - Chemical laboratories. Laboratory equipment
• Technical Committee: VMO - Safety of measuring, control, and laboratory equipment
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Feb-2005
• Due Date: 01-Feb-2005
• Completion Date: 01-Feb-2005
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: EN 61010-2-031:1994 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-031: Particular requirements for hand-held probe assemblies for electrical measurement and test

Relations

• Replaced By: SIST EN 61010-031:2003 - Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
• Effective Date: 28-Jan-2023
• Replaced By: SIST EN 61010-031:2003 - Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
• Effective Date: 06-May-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-031: Particular requirements for hand held probe assemblies for electrical measurement and test (IEC 1010-2-031:1993)Sicherheitsbestimmungen für elektrische Meß-, Steuer-, Regel- und Laborgeräte -- Teil 2-031: Besondere Anforderungen an handgehaltene Meß-, Prüf- und Verbindungsleitungen (Meßzubehör) zum (elektrischen) Messen, Prüfen und ExperimentierenRègles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire -- Partie 2-031: Prescriptions particulières pour sondes équipées manuelles de mesurage et d'essais électriquesSafety requirements for electrical equipment for measurement, control and laboratory use -- Part 2-031: Particular requirements for hand-held probe assemblies for electrical measurement and test71.040.10Kemijski laboratoriji
...