SIST EN IEC 61000-3-2:2019/A2:2025
(Amendment)Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
Elektromagnetische Verträglichkeit (EMV) - Teil 3-2: Grenzwerte – Grenzwerte für Oberschwingungsströme (Geräte-Eingangsstrom ≤ 16 A je Leiter)
Amendement 2 - Compatibilité électromagnétique (CEM) - Partie 3-2 : Limites - Limites pour les émissions de courant harmonique (courant appelé par les appareils ≤ 16 A par phase)
Elektromagnetna združljivost (EMC) - 3-2. del: Mejne vrednosti - Mejne vrednosti za oddajanje harmonskih tokov (vhodni tok opreme do vključno 16 A na fazo) - Dopolnilo A2
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2025
Elektromagnetna združljivost (EMC) - 3-2. del: Mejne vrednosti - Mejne vrednosti
za oddajanje harmonskih tokov (vhodni tok opreme do vključno 16 A na fazo) -
Dopolnilo A2
Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for
harmonic current emissions (equipment input current ≤16 A per phase)
Elektromagnetische Verträglichkeit (EMV) - Teil 3-2: Grenzwerte – Grenzwerte für
Oberschwingungsströme (Geräte-Eingangsstrom ≤ 16 A je Leiter)
Amendement 2 - Compatibilité électromagnétique (CEM) - Partie 3-2 : Limites - Limites
pour les émissions de courant harmonique (courant appelé par les appareils ≤ 16 A par
phase)
Ta slovenski standard je istoveten z: EN IEC 61000-3-2:2019/A2:2024
ICS:
33.100.10 Emisija Emission
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61000-3-2:2019/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2024
ICS 33.100.10
English Version
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for
harmonic current emissions (equipment input current < 16 A per
phase)
(IEC 61000-3-2:2018/AMD2:2024)
Compatibilité électromagnétique (CEM) - Partie 3-2 : Elektromagnetische Verträglichkeit (EMV) - Teil 3-2:
Limites - Limites pour les émissions de courant harmonique Grenzwerte - Grenzwerte für Oberschwingungsströme
(courant appelé par les appareils < 16 A par phase) (Geräte-Eingangsstrom < 16 A je Leiter)
(IEC 61000-3-2:2018/AMD2:2024) (IEC 61000-3-2:2018/AMD2:2024)
This amendment A2 modifies the European Standard EN IEC 61000-3-2:2019; it was approved by CENELEC on 2024-04-08. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61000-3-2:2019/A2:2024 E
European foreword
The text of document 77A/1161/CDV, future IEC 61000-3-2/AMD2, prepared by SC 77A "EMC - Low
frequency phenomena" of IEC/TC 77 "Electromagnetic compatibility" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 61000-3-2:2019/A2:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-01-08
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-04-08
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CENELEC by the
European Commission. The Standing Committee of the EFTA States subsequently approves these
requests for its Member States.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61000-3-2:2018/AMD2:2024 was approved by CENELEC
as a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
The Annex ZA of EN IEC 61000-3-2:2019 applies with the following changes:
Publication Year Title EN/HD Year
Replace the references IEC 60335-2-14:2016, as modified by Amendment 1, IEC 60335-2-24:2010,
as modified by Amendment 1, and IEC 60335-2-79:2016, as modified by Amendment 1, with the
following:
IEC 60335-2-14 2016 Household and similar electrical appliances EN IEC 60335-2-14 2023
- Safety - Part 2-14: Particular
requirements for kitchen machines
+ A1 2019 A1 2023
- - A11 2023
IEC 60335-2-24 2020 Household and similar electrical appliances EN IEC 60335-2-24 2022
- Safety - Part 2-24: Particular
requirements for refrigerating appliances,
ice cream appliances and ice makers
- - A11 2022
IEC 60335-2-79 2021 Household and similar electrical appliances - -
- Safety - Part 2-79: Particular
requirements for high pressure cleaners
and steam cleaners
Replace IEC 60598-2-17:2012, as modified by Amendment 1, with the following:
IEC 60598-2-17 2017 Luminaires - Part 2-17: Particular EN IEC 60598-2-17 2018
requirements - Luminaires for stage
lighting, television and film studies (outdoor
and indoor)
Replace IEC 60974-1:2017, as modified by Amendment 1, with the following:
IEC 60974-1 2021 Arc welding equipment - Part 1: Welding EN IEC 60974-1 2022
power sources
- - + A11 2022
- - + A12 2023
Add the following new reference:
IEC Guide 115 2023 Application of uncertainty of measurement - -
to conformity assessment activities in the
electrotechnical sector
IEC 61000-3-2 ®
Edition 5.0 2024-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 2
AMENDEMENT 2
Electromagnetic compatibility (EMC) –
Part 3-2: Limits – Limits for harmonic current emissions (equipment input
current ≤16 A per phase)
Compatibilité électromagnétique (CEM) –
Partie 3-2 : Limites – Limites pour les émissions de courant harmonique
(courant appelé par les appareils ≤16 A par phase)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.100.10 ISBN 978-2-8322-8331-8
– 2 – IEC 61000-3-2:2018/AMD2:2024
© IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTROMAGNETIC COMPATIBILITY (EMC) –
Part 3-2: Limits – Limits for harmonic current emissions
(equipment input current ≤16 A per phase)
AMENDMENT 2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
Amendment 2 to IEC 61000-3-2:2018 has been prepared by subcommittee 77A: EMC – Low
frequency phenomena, of IEC technical committee 77: Electromagnetic compatibility.
The text of this Amendment is based on the following documents:
Draft Report on voting
77A/1161/CDV 77A/1181/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
IEC 61000-3-2:2018/AMD2:2024 – 3 –
© IEC 2024
The language used for the development of this Amendment is English
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications/.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn, or
• revised.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.
___________
INTRODUCTION to Amendment 2
Amendment 2 to IEC 61000-3-2 Ed. 5.1 (= IEC 61000-3-2:2018 plus
IEC 61000-3-2/AMD1:2021) is based on 77A/1098/Q, 77A/1106/DISH, 77A/1123A/RQ,
77A/1149/CD, 77A/1150/CD, 77A/1151/CD, 77A/1152/CD, the observations to these CD’s and
discussions in SC77A / WG1 during the meetings October 2021, May 2022 and November 2022.
At CD stage the amendment has been split into 4 different fragments:
Fragment 1 Lighting equipment
Fragment 2 Test conditions
Fragment 3 Repeatability and measurement uncertainty
Fragment 4 Miscellaneous
As the number of comments on the 4 different CDs was not very high, SC77A WG1 during its
meeting November 2022 in San Diego decided to combine the 4 fragments already at CDV
stage.
– 4 – IEC 61000-3-2:2018/AMD2:2024
© IEC 2024
This amendment contains the following main
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.