SIST EN ISO 9856:2004/A1:2012
(Amendment)Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd 1:2012)
Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd 1:2012)
This International Standard specifies a method for determining the elastic and permanent elongation of a conveyor belt and the calculation of the elastic modulus. It is not applicable or valid for light conveyor belts as described in EN 873.
Fördergurte - Bestimmung der elastischen und dauerhaften Dehnung und Berechnung des Elastizitätsmoduls (ISO 9856:2003/Amd 1:2012)
Courroies transporteuses - Détermination de l'allongement élastique et permanent et calcul du module d''élasticité (ISO 9856:2003/Amd 1:2012)
Naprave za kontinuirni transport - Trakovi tračnih transporterjev - Določitev elastičnega in trajnega raztezka ter izračun modula elastičnosti - Dopolnilo A1 (ISO 9856:2003/Amd 1:2012)
Ta mednarodni standard opisuje metodo za določanje elastičnega in trajnega raztezka traka tračnega transporterja ter izračun modula elastičnosti. Standard se ne uporablja oziroma ni veljaven za lahke trakove tračnih transporterjev iz standarda EN 873.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9856:2004/A1:2012
01-oktober-2012
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW7UDNRYLWUDþQLKWUDQVSRUWHUMHY'RORþLWHY
HODVWLþQHJDLQWUDMQHJDUD]WH]NDWHUL]UDþXQPRGXODHODVWLþQRVWL'RSROQLOR$
,62 $PG
Conveyor belts - Determination of elastic and permanent elongation and calculation of
elastic modulus (ISO 9856:2003/Amd 1:2012)
Fördergurte - Bestimmung der elastischen und dauerhaften Dehnung und Berechnung
des Elastizitätsmoduls (ISO 9856:2003/Amd 1:2012)
Courroies transporteuses - Détermination de l'allongement élastique et permanent et
calcul du module d''élasticité (ISO 9856:2003/Amd 1:2012)
Ta slovenski standard je istoveten z: EN ISO 9856:2003/A1:2012
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 9856:2004/A1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9856:2004/A1:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 9856:2004/A1:2012
EUROPEAN STANDARD
EN ISO 9856:2003/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2012
ICS 53.040.20
English Version
Conveyor belts - Determination of elastic and permanent
elongation and calculation of elastic modulus (ISO
9856:2003/Amd 1:2012)
Courroies transporteuses - Détermination de l'allongement Fördergurte - Bestimmung der elastischen und dauerhaften
élastique et permanent et calcul du module d''élasticité Dehnung und Berechnung des Elastizitätsmoduls (ISO
(ISO 9856:2003/Amd 1:2012) 9856:2003/Amd 1:2012)
This amendment A1 modifies the European Standard EN ISO 9856:2003; it was approved by CEN on 6 July 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9856:2003/A1:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9856:2004/A1:2012
EN ISO 9856:2003/A1:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 9856:2004/A1:2012
EN ISO 9856:2003/A1:2012 (E)
Foreword
This document (EN ISO 9856:2003/Amd 1:2012) has been prepared by Technical Committee ISO/TC 41
"Pulleys and belts (including veebelts)" in collaboration with Technical Committee CEN/TC 188 “Conveyor
belts” the secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at
the latest by January 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slo
...
SLOVENSKI STANDARD
SIST EN ISO 9856:2004/oprA1:2011
01-julij-2011
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW7UDNRYLWUDþQLKWUDQVSRUWHUMHY'RORþLWHY
HODVWLþQHJDLQWUDMQHJDUD]WH]NDWHUL]UDþXQPRGXODHODVWLþQRVWL'RSROQLOR$
,62 '$0
Conveyor belts - Determination of elastic and permanent elongation and calculation of
elastic modulus (ISO 9856:2003/DAM 1:2011)
Fördergurte - Bestimmung der elastischen und dauerhaften Dehnung und Berechnung
des Elastizitätsmoduls (ISO 9856:2003/DAM 1:2011)
Courroies transporteuses - Détermination de l'allongement élastique et permanent et
calcul du module d''élasticité (ISO 9856:2003/DAM 1:2011)
Ta slovenski standard je istoveten z: EN ISO 9856:2003/prA1
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 9856:2004/oprA1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9856:2004/oprA1:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 9856:2004/oprA1:2011
EUROPEAN STANDARD
DRAFT
EN ISO 9856:2003
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
April 2011
ICS 53.040.20
English Version
Conveyor belts - Determination of elastic and permanent
elongation and calculation of elastic modulus (ISO
9856:2003/DAM 1:2011)
Courroies transporteuses - Détermination de l'allongement Fördergurte - Bestimmung der elastischen und dauerhaften
élastique et permanent et calcul du module d''élasticité Dehnung und Berechnung des Elastizitätsmoduls (ISO
(ISO 9856:2003/DAM 1:2011) 9856:2003/DAM 1:2011)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 188.
This draft amendment A1, if approved, will modify the European Standard EN ISO 9856:2003. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9856:2003/prA1:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9856:2004/oprA1:2011
EN ISO 9856:2003/prA1:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 9856:2004/oprA1:2011
EN ISO 9856:2003/prA1:2011 (E)
Foreword
This document (EN ISO 9856:2003/DAM 1:2011) has been prepared by Technical Committee ISO/TC 41
"Pulleys and belts (including veebelts)" in collaboration with Technical Committee CEN/TC 188 “Conveyor
belts” the secretariat of which is held by SNV.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of EN ISO 9856:2003/DAM 1:2011 has been approved by CEN as a EN ISO 9856:2003/prA1:2011
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 9856:2004/oprA1:2011
---------------------- Page: 6 ----------------------
SIST EN ISO 9856:2004/oprA1:2011
DRAFT AMENDMENT ISO 9856:2003/DAM 1
ISO/TC 41/SC 3 Secretariat: JISC
Voting begins on Voting terminates on
2011-04-21 2011-09-21
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Conveyor belts — Determination of elastic and permanent
elongation and calculation of elastic modulus
AMENDMENT 1
Courroies transporteuses — Détermination de l'allongement élastique et permanent et calcul du module
d'élasticité
AMENDEMENT 1
ICS 53.040.20
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.