Rubber materials for seals and diaphragms for gas appliances and gas equipment

This document specifies requirements and associated test methods for rubber materials used in gas installations, gas equipment and gas appliances in contact with 1st, 2nd and 3rd family combustible gases as classified in EN 437:2018, additionally LPG, bio methane and bio LPG, in the same quality, are covered. It also establishes a classification based on temperature range and hardness. This document is applicable to materials from which homogeneous seals and homogeneous or reinforced diaphragms are manufactured.
Since the dimensions and shape of the components differ from those of standard test pieces taken from sheet material as used for type testing of the rubber materials according to this document, tolerances have been made in the requirements specified by Annex A for the components with respect to those specified for standard test pieces.
The range of operating temperatures covered by this document is –40 °C to +150 °C.
For applications with potential condensation, this document is not applicable for silicon rubber, e.g. above 200 hPa (200 mbar) nominal pressure or at temperatures below 0 °C with 3rd family gases.

Elastomer-Werkstoffe für Dichtungen und Membranen in Gasgeräten und Gasanlagen

Matériaux à base de caoutchouc pour joints d'étanchéité et membranes destinés aux appareils à gaz et matériels pour le gaz

Gumeni materiali za tesnila in membrane v plinskih aparatih in plinskih napravah - Dopolnilo A1

Ta dokument določa zahteve in z njimi povezane preskusne metode za gumene materiale, ki se uporabljajo v plinskih napeljavah, plinskih napravah in plinskih aparatih v stiku z vnetljivimi plini iz 1., 2. in 3. družine, razvrščenimi v skladu s standardom EN 437:2018, pri čemer zajema tudi utekočinjeni naftni plin (LPG), biometan in utekočinjeni naftni plin biološkega izvora enake kakovosti. Vzpostavlja tudi razvrstitev glede na temperaturno območje delovanja in trdoto. Ta dokument se uporablja za materiale, iz katerih so izdelana homogena tesnila in homogene ali ojačane membrane.
Ker se mere in oblika komponent razlikujejo od standardnih preskušancev iz plastnega materiala, ki se uporabljajo za tipsko preskušanje gumenih materialov v skladu s tem dokumentom, so bila v zahtevah, določenih v dodatku A, določena dovoljena odstopanja za komponente glede na tiste, ki veljajo za standardne preskušance.
Ta dokument zajema temperaturno območje delovanja od –40 °C do +150 °C.
Za načine uporabe, pri katerih je lahko prisotna kondenzacija, se ta dokument ne uporablja za silikonsko gumo, npr. pri nazivnem tlaku nad 200 hPa (200 mbar) ali temperaturi pod 0 °C s plini iz 3. družine.

General Information

Status
Withdrawn
Publication Date
28-May-2023
Withdrawal Date
06-May-2024
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
06-May-2024
Due Date
29-May-2024
Completion Date
07-May-2024

Relations

Buy Standard

Standard
EN 549:2019+A1:2023
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 549:2019+A1:2023
01-julij-2023
Gumeni materiali za tesnila in membrane v plinskih aparatih in plinskih napravah -
Dopolnilo A1
Rubber materials for seals and diaphragms for gas appliances and gas equipment
Elastomer-Werkstoffe für Dichtungen und Membranen in Gasgeräten und Gasanlagen
Matériaux à base de caoutchouc pour joints d'étanchéité et membranes destinés aux
appareils à gaz et matériels pour le gaz
Ta slovenski standard je istoveten z: EN 549:2019+A1:2023
ICS:
83.140.50 Tesnila Seals
91.140.40 Sistemi za oskrbo s plinom Gas supply systems
SIST EN 549:2019+A1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 549:2019+A1:2023

---------------------- Page: 2 ----------------------
SIST EN 549:2019+A1:2023


EN 549:2019+A1
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2023
EUROPÄISCHE NORM
ICS 23.040.80; 83.140.50 Supersedes EN 549:2019
English Version

Rubber materials for seals and diaphragms for gas
appliances and gas equipment
Matériaux à base de caoutchouc pour joints Elastomer-Werkstoffe für Dichtungen und Membranen
d'étanchéité et membranes destinés aux appareils à in Gasgeräten und Gasanlagen
gaz et matériels pour le gaz
This European Standard was approved by CEN on 22 April 2019 and includes Amendment 1 approved by CEN on 23 February
2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 549:2019+A1:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 549:2019+A1:2023
EN 549:2019+A1:2023 (E)
Contents Page

European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Product's information . 7
5 Classification . 8
6 Requirements . 9
6.1 General . 9
6.2 Requirements for rubber material used to manufacture seals . 9
6.3 Requirements for rubber material used to manufacture diaphragms . 11
7 Test methods . 13
7.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.