CEN/TC 150/WG 15 - Sustainability

This part of EN 16796 specifies the methods of energy consumption measurement for stacking high-lift straddle carrier (hereafter referred to as straddle carrier), as defined in ISO 5053 1:2015, 3.19.

This document specifies the method of fuel consumption measurement for rough-terrain variable-reach trucks as defined in ISO 5053-1, hereinafter referred to as trucks. It does not apply to slewing trucks having a movement of more than 5° either side of the longitudinal axis.
This part is intended to be used in conjunction with EN 16796-1. Where the requirements of this part differ from that in part 1, requirements in this part 4 will take precedence.

This European Standard specifies general test criteria and requirements to measure the energy consumption for self-propelled industrial trucks (hereafter referred to as trucks) during operation. For electric trucks, the efficiency of the battery and the battery charger is included.
This part of the EN 16796 series is intended to be used in conjunction with the corresponding EN 16796-2 to -5.
The truck specific requirements in EN 16796-2 to -5 take precedence over the respective requirements of EN 16796 1.
Of the product life cycle, EN 16796 is applicable to the in-use phase.
It applies to the following truck types according to ISO 5053 1:
-   counterbalance lift truck;
-   articulated counterbalance lift truck;
-   lorry-mounted truck;
-   reach truck (with retractable mast or fork arm carriage);
-   straddle truck;
-   pallet-stacking truck;
-   pallet truck;
-   platform and stillage truck;
-   pallet truck end controlled;
-   order-picking truck;
-   centre-controlled order-picking truck;
-   towing, pushing tractor and  burden carrier;
-   towing and stacking tractor;
-   side-loading truck (one side only);
-   rough-terrain truck;
-   rough-terrain variable-reach truck;
-   slewing rough-terrain variable-reach truck;
-   variable-reach container handler;
-   counterbalance container handler;
-   lateral-stacking truck (both sides);
-   lateral-stacking truck (three sides);
-   non-stacking low-lift straddle carrier;
-   multi-directional lift truck.

This European Standard specifies the method of energy consumption measurement for container handling lift trucks, as defined in ISO 5053 1.
This part is intended to be used in conjunction with EN 16796 1.

This European Standard specifies the method of energy consumption measurement for the following types of industrial trucks as defined in ISO 5053 1:
-   counterbalance lift truck;
-   articulated counterbalance lift truck;
-   lorry-mounted truck;
-   reach truck (with retractable mast or fork arm carriage);
-   straddle truck;
-   pallet-stacking truck,
-   pallet truck;
-   platform and stillage truck;
-   pallet truck end controlled;
-   order-picking truck;
-   centre-controlled order-picking truck;
-   towing, pushing tractor and  burden carrier;
-   towing and stacking tractor;
-   side-loading truck (one side only);
-   lateral-stacking truck (both sides);
-   lateral-stacking truck (three sides);
-   non-stacking low-lift straddle carrier;
-   multi-directional lift truck.
This part is intended to be used in conjunction with EN 16796 1.

This document specifies general test criteria and requirements to measure the energy consumption for self-propelled industrial trucks (hereinafter referred to as trucks) during operation. For electric trucks, the efficiency of the battery and the battery charger is included.
The truck specific requirements in ISO 23308‑2 and ISO 23308‑3 take precedence over the respective requirements of ISO 23308‑1.
This document is applicable to the in-use phase of the product life cycle.
It applies to the following truck types according to ISO 5053‑1:
— counterbalance lift truck;
— articulated counterbalance lift truck;
— reach truck (with retractable mast or fork arm carriage);
— straddle truck;
— pallet-stacking truck;
— pallet truck;
— platform and stillage truck;
— pallet truck end controlled;
— order-picking truck;
— centre-controlled order-picking truck;
— towing, pushing tractor and burden carrier;
— towing and stacking tractor;
— side-loading truck (one side only);
— variable-reach container handler;
— counterbalance container handler;
— lateral-stacking truck (both sides);
— lateral-stacking truck (three sides);
— multi-directional lift truck.

This document specifies the method of energy consumption measurement for container handling lift trucks, as defined in ISO 5053‑1.

This document specifies the methods of energy consumption measurement for stacking high-lift straddle carrier (hereafter referred to as straddle carrier), as defined in ISO 5053-1:2020, 3.19.

This document specifies the method of energy consumption measurement for the following types of industrial trucks as defined in ISO 5053‑1:
— counterbalance lift truck;
— articulated counterbalance lift truck;
— reach truck (with retractable mast or fork arm carriage);
— straddle truck;
— pallet-stacking truck;
— pallet truck;
— platform and stillage truck;
— pallet truck end controlled;
— order-picking truck;
— centre-controlled order-picking truck;
— towing, pushing tractor and burden carrier;
— towing and stacking tractor;
— side-loading truck (one side only);
— lateral-stacking truck (both sides);
— lateral-stacking truck (three sides);
— multi-directional lift truck.