CEN/TC 183/WG 3 - Identification and/or determination of waste

This document defines the standard for exchanging stationary waste collection container information between the collection container system and the back-office systems.
This document defines the way to exchange data between the "Communication Management System" of the collection container and the "Back-Office Systems".
The exchange of data between the "Collection Container Systems" and the "Communication Management Systems" or the "Back-Office Systems" is excluded.
This document targets two streams of information in the waste processing industry:
-   The processing of transactions and system information for the deposit of waste from the communication management systems to the back office systems.
-   The processing of authorization and configuration information from the back-office systems to the communication management systems.

This document is used in the framework of the waste processing industry and defines the processing of relevant information for the deposit of garbage between access chips and the collection container systems.
This document is not intended to be used for container identification.
NOTE   The container identification is covered by EN 14803.
This document provides the technical specification and the restrictions that are defined on top of ISO/IEC 14443-1, ISO/IEC 14443-2 and ISO/IEC 14443-3.

This document specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste and other reusable materials including:
-   safety requirements;
-   interface requirements and performances;
-   data to be treated and their integrity.
This document is applicable to systems for handling containers conforming to the EN 840 series.
Although this document does not cover systems for handling containers not conforming to the EN 840 series, users are encouraged to apply the requirements of this document to these systems as far as possible.
This document is applicable to systems both for billing and not for billing.
This document is applicable to systems both for billing and not for billing.

This European Standard provides a set of CANopen application profile specifications that describes the CleANopen embedded body control network of municipal vehicles, e.g. refuse collecting trucks. It specifies the CANopen communication interfaces and the application functionality of several functional elements (virtual devices).
It does not specify CANopen devices. The CleANopen application profile specifications consist of several parts dealing with the following:
- general definitions;
- functionality of the virtual devices;
- pre defined PDOs and SDOs;
- application objects.

This document specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste and other reusable materials including:
-   safety requirements;
-   interface requirements and performances;
-   data to be treated and their integrity.
This document is applicable to systems for handling containers conforming to the EN 840 series.
Although this document does not cover systems for handling containers not conforming to the EN 840 series, users are encouraged to apply the requirements of this document to these systems as far as possible.
This document is applicable to systems both for billing and not for billing.
This document is applicable to systems both for billing and not for billing.

This European Standard specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste including:
¾   safety requirements;
¾   interface requirements and performances;
¾   data to be treated and their integrity.
This European Standard is applicable to systems for handling containers conforming to EN 840.
NOTE   Although this European Standard does not cover systems for handling containers not conforming to EN 840, it is recommended to apply the requirements of this document to these systems as far as possible.
This European Standard is applicable to systems both for billing and not for billing.

This Technical Report provides a set of CANopen application profile specifications that describes the CleANopen embedded body control network of municipal vehicles, e.g. refuse collecting trucks.
It specifies the CANopen communication interfaces and the application functionality of several functional elements (virtual devices).
It does not specify CANopen devices.
The CleANopen application profile specifications consist of several parts dealing with the following:
-   general definitions;
-   functionality of the virtual devices;
-   pre defined PDOs and SDOs;
-   application objects.