EN 17366:2020

Waste management - Access control to collection containers - Identification and authorization

This document is used in the framework of the waste processing industry and defines the processing of relevant information for the deposit of garbage between access chips and the collection container systems.
This document is not intended to be used for container identification.
NOTE   The container identification is covered by EN 14803.
This document provides the technical specification and the restrictions that are defined on top of ISO/IEC 14443-1, ISO/IEC 14443-2 and ISO/IEC 14443-3.

Abfallwirtschaft - Zugangssteuerung von Abfallbehältern - Identifikation und Autorisierung

Dieses Dokument findet im Rahmen der Abfallverwertungsbranche Anwendung und legt die Verarbeitung relevanter Informationen zur Lagerung von Abfall zwischen Zugangschips und Sammelbehälter¬systemen fest.
Dieses Dokument ist nicht zur Verwendung für Behälteridentifikation vorgesehen.
ANMERKUNG Die Behälteridentifikation wird in EN 14803 behandelt.
Dieses Dokument liefert die technische Spezifikation und die Einschränkungen, die zusätzlich zu ISO/IEC 14443 1, ISO/IEC 14443 2 und ISO/IEC 14443 3 definiert wurden.

Gestion des déchets - Contrôle des accès aux conteneurs à déchets - Identification et autorisation

Le présent document est utilisé dans le cadre de l'industrie du traitement des déchets et définit le traitement des informations pertinentes pour le dépôt de déchets entre les supports d'accès et les systèmes du conteneur à déchets.
Le présent document n'est pas destiné à être utilisé pour l'identification des conteneurs.
NOTE L'identification des conteneurs est couverte par l'EN 14803.
Le présent document fournit des spécifications techniques et des restrictions complémentaires par rapport à l’ISO/IEC 14443-1, l’ISO/IEC 14443-2 et l’ISO/IEC 14443-3.

Ravnanje z odpadki - Nadzor dostopa do zabojnikov za zbiranje odpadkov - Identifikacija in avtorizacija

General Information

• Status: Published
• Publication Date: 02-Jun-2020
• Withdrawal Date: 30-Dec-2020
• ICS: 13.030.40 - Installations and equipment for waste disposal and treatment
• Technical Committee: CEN/TC 183 - Waste management
• Drafting Committee: CEN/TC 183/WG 3 - Identification and/or determination of waste
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 03-Jun-2020
• Due Date: 26-Nov-2020
• Completion Date: 03-Jun-2020
• Ref Project: SIST EN 17366:2020 - Waste management - Access control to collection containers - Identification and authorization

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2020
Ravnanje z odpadki - Nadzor dostopa do zabojnikov za zbiranje odpadkov -
Identifikacija in avtorizacija
Waste management - Access control to collection containers - Identification and
authorization
Abfallwirtschaft - Zugriffssteuerung - Identifikation und Autorisierung
Gestion des déchets - Contrôle des accès - Identification et autorisation
Ta slovenski standard je istoveten z: EN 17366:2020
ICS:
13.030.99 Drugi standardi v zvezi z Other standards related to
odpadki wastes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 17366
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2020
EUROPÄISCHE NORM
ICS 13.030.40
English Version
Waste management - Access control to collection
containers - Identification and authorization
Gestion des déchets - Contrôle des accès aux Abfallwirtschaft - Zugriffssteuerung von
conteneurs à déchets - Identification et autorisation Abfallbehältern - Identifikation und Autorisierung
This European Standard was approved by CEN on 27 April 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17366:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 6
4.1 General . 6
4.2 Frequency . 6
4.3 Type of the access chip . 6
4.4 Unique Identifier (UID) . 6
4.4.1 Generalities . 6
4.4.2 Requirement . 6
4.5 Length of unique number . 7
4.5.1 Generalities . 7
4.5.2 Requirement on unique number . 7
4.6 Information on access chip . 7
4.6.1 Generalities . 7
4.6.2 Requirement on access chip . 7
4.7 Information required to open the collection container . 7
........................ 7
4.8 Reading the unique number .
4.9 Writing to the access chip . 7
4.10 Security . 7
Bibliography . 8

European foreword
This document (EN 17366:2020) has been prepared by Technical Committee CEN/TC 183 “Waste
management”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2020, and conflicting national standards
shall be withdrawn at the latest by December 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Introduction
This document takes ISO/IEC 14443-1, ISO/IEC 14443-2 and ISO/IEC 14443-3 as a basis. In the case
th
...