IEC/SC 59C - IEC_SC_59C

This standard applies to electric direct -acting room heaters. They may be portable,
stationary, fixed, or built-in.
It does not apply to:
— thermal-storage room heaters (IEC 531);
- heating appliances incorporated in the building structure;
- central heating systems;
— heaters connected to an air duct;
- wall-paper, carpets or drapes incorporating flexible heating elements.
This standard defines the main performance characteristics of direct-acting room
heaters and specifies methods for measuring these characteristics, for the information of
users.
This standard does not specify values for performance characteristics.
NOTE - This standard does not deal with:
- safety requirements (IEC 335-2-30);
acoustical noise of fan heaters (IEC 704-2-2).

PWI created for possible future // procedures * DOP = DAV + 6 months (D139/C142)

IEC 61255:2014 applies to electric heating pads for household use. This International Standard defines the main performance characteristics of electric heating pads and specifies methods for measuring these characteristics, for the information of users. This International Standard does not specify values for performance characteristics. This edition includes the following significant technical changes with respect to the previous edition: a) extended classification; b) extended list of measurements; c) temperature measurement means changed to thermocouples.

IEC 60299:2014 applies to electric blankets, wraps and duvets for household use. This International Standard defines the main performance characteristics of electric blankets, wraps and duvets and specifies methods for measuring these characteristics, for the information of users. This International Standard does not specify values for performance characteristics. This edition includes the following significant technical changes with respect to the previous edition: a) extended classification; b) extended list of measurements; c) temperature measurement means changed to thermocouples.

IEC 60704-2-2:2009 provides the methods of determination of airborne acoustical noise emitted by electric fan heaters, designed for placing on the floor, table or counter,etc., or for wall mounting supplied from mains or from batteries. The main changes from the previous edition are as follows: provisions with regard to measurement uncertainty and standard deviation for declaration and verification have been included in the scope. This publication is to be read in conjunction with IEC 60704-1:2010.

IEC 60675-3:2020 applies to electric direct-acting room heaters. This document defines performance characteristics related to the radiant effect and specifies methods for measuring the radiation efficiency for the information of users. This document is used to measure the radiation efficiency of direct-acting room heaters. This International Standard is to be used in conjunction with IEC 60675:1994, IEC 60675:1994/AMD1:1998 and IEC 60675:1994/AMD2:2018.

IEC 60675-2:2020 applies to electric direct-acting room heaters. This document defines performance characteristics related to the radiant effect and specifies methods for measuring the radiant factor for the information of users. This document is used to measure the radiant factor of direct-acting room heaters. This International Standard is to be used in conjunction with IEC 60675:1994, IEC 60675:1994/AMD1:1998 and IEC 60675:1994/AMD2:2018.

Applies to the electric thermal storage room heaters having forced convection output, designed for placing on the floor, for wall-mounting or for building-in.

Applies to electric storage heaters intended to heat the room in which they are located. It defines the main performance characteristics and describes methods for measuring these characteristics. It does not apply to heating appliances incorporated in the building structure, to central heating systems or to floor heating appliances.

EN following parallel vote

Applies to electric direct-acting room heaters. They may be portable, stationary, fixed or built-in. It defines the main performance characteristics and the methods for measuring these characteristics. For thermal-storage room heaters, see IEC 60531.

This standard applies to hydraulic, closed electrical instantaneous water heaters, for household and similar use. This standard does not apply to storage water heaters (HD 500 S1) and to instantaneous water heaters with electronically controlled power input. This standard specifies definitions and measurement methods for assessing the performance characteristics. It does not deal with safety requirements which are covered by EN 60335-2-35

Superseded by EN 60704-2-5:2005

Former HD 423.2.2 S1 * Superseded by EN 60704-2-2:2010

Defines the main performance characteristics of electric heating pads and specifies methods for measuring these characteristics, for the information of users. Does not specify values for performance characteristics. Does not deal with safety requirements.

This standard defines the main performance characteristics of electric blankets and specifies methods for measuring these characteristics, for the information of users. This standard does not specify values for performance characteristics.

States and defines the principal performance characteristics of electric storage water-heaters which are of interest to the user and to describe the standard methods for measuring these characteristics. This standard is concerned neither with safety nor with performance requirements.