IEC/SC CISPR/E - IEC_SC_CISPR/E

Applies to television broadcast receivers, sound broadcast receivers and associated equipment intended for use in the residential, commercial and light industrial environment. Describes the methods of measurement and specified limits applicable to sound and television receivers and to associated equipment with regard to their immunity characteristics to disturbing signals. This standard is also applicable to the immunity of outdoor units of direct to home (DTH) satellite receiving systems for individual reception. Defines the immunity test requirements for equipment defined in the scope in relation to continuous and transient, conducted and radiated disturbances including electrostatic discharges. Immunity requirements are given in the frequency range 0 Hz to 400 GHz. Test requirements are specified for each port (enclosure or connector) considered.

Applies to the generation of electromagnetic energy from sound and television receivers for the reception of broadcast and similar transmissions and from associated equipment. Describes the methods of measurement applicable to sound and television receivers or associated equipment and specifies limits for the control of disturbance from such equipment. The frequency range covered extends from 9 kHz to 400 GHz.

Superseded by EN 55020:2002 * Published under SC 210A disbanded by D115/098

Superseded by EN 55020:2002 * Published under SC 210A disbanded by D115/098

Superseded by EN 55013:2001 * Published under SC 210A disbanded by D115/098

Corrigendum to EN/A12 issued July 2001 (new dow) * Superseded by EN 55020:2002 * Published under SC 210A disbanded by D115/098

D91/163: New dow * Superseded by EN 55020:2002 * Published under SC 210A disbanded by D115/098

D91/163: New dow * Superseded by EN 55013:2001 * Published under SC 210A disbanded by D115/098

This standard for immunity requirements applies to television broadcast receivers, sound broadcast receivers and associated equipment intended for use in the residential, commercial and light industrial environment. Immunity requirements are given in the frequency range 0 Hz to 400 GHz. Radio-frequency tests outside the specified frequency bands or concerning other phenomena than given in this standard are not required.

Incorporates A11 * Corrigendum to EN/A12 issued December 1997 (deletion of certification clause) * Superseded by EN 55013:2001 * Published under SC 210A disbanded by D115/098

This standard specifies limits and methods of measurement of electromagnetic disturbance caused by sound broadcast receivers, television receivers and associated equipment. Procedures are given for the measurement of electromagnetic disturbance and limits are laid down in the frequency range 9 kHz to 1000 MHz.