113 - Nanotechnology for electrotechnical products and systems

IEC 62607:2020, a Technical Specification, provides a method for determining the fluorescence lifetime of semiconductor quantum dots (QDs) using the time correlated single photon counting (TCSPC) technique. TCSPC is suitable for testing fluorescence lifetime in the range from picoseconds to nanoseconds. This document is only applicable to liquid samples that are stable dispersions of QDs. It is not applicable to solid samples.
This document includes:
– outlines of the experimental procedures,
...view more

IEC TS 62607-6-13:2020 establishes a standardized method to determine the chemical key control characteristic
• oxygen functional group content
on graphite oxide, graphene oxide, reduced graphene oxide and other types of functionalized graphene by
• Boehm titration method.
In this document, the measured functional groups are carboxyl groups (also in the form of their cyclic anhydrides), lactone groups, hydroxyl groups and reactive carbonyl groups. Oxygen functional groups that exhibit no rea...view more

IEC TS 62607-6-1:2020 establishes a standardized method to determine the electrical key control characteristic
– volume resistivity
for powder consisting of graphene-based material like flakes of graphene, few layer graphene and/or reduced graphene oxide after preparation of a sample in pellet form by
– four probe method
using powder resistivity measurement system.
The volume resistivity is a measure of the quality of powder-type graphene products in terms of electrical property and reflect...view more

IEC TS 62607-5-3:2020 specifies sample structures for evaluating a wide range of charge carrier concentration in organic/nano materials. This specification is provided for both capacitance-voltage (C-V) measurements in metal/insulator/semiconductor stacking structures and Hall-effect measurements with the van der Pauw configuration. Criteria for choosing measurement methods of charge carrier concentration in organic semiconductor layers are also given in this document.

IEC TS 62607-2-4:2020 specifies the test method for determining the resistivity and the contact resistance of an individual CNT and the dependability of the measurement.
This document includes:
– outlines of the experimental procedures used to measure resistance of carbon nanotubes,
– methods of interpretation of results and discussion of data analysis, and
– case studies.

IEC TS 62607-8-1:2020 There are two types of thermally stimulated current (TSC) measurement methods, classified by the origin of the current. One is generated by the detrapping of charges. The other one is generated by depolarization. IEC TS 62607-8-1:2020 focuses on the former method, and specifies the measurement method to be developed for determining defect states of nano-enabled metal-oxide interfacial devices.
IEC TS 62607-8-1:2020 includes:
– outlines of the experimental procedures used ...view more

IEC TS 62607-4-8:2020 specifies a test method for the determination of water content in electrode nanomaterials for nano-enabled electrical energy storage devices, using the Karl Fischer coulometric titration method.
This document includes:
- recommendations for sample preparation,
- outlines of the experimental procedures used to measure electrode nanomaterial properties, and
- methods of interpretation of results and discussion of data analysis.
IEC TS 62607-4-8:2020 is not applicable for...view more

IEC TS 62565-4-1:2019 establishes a blank detail specification and format for listing essential optical and certain other characteristics of monodisperse luminescent nanomaterials. This document does not address mixtures or agglomerations of luminescent nanomaterials.
In addition, this document enables the customer to specify requirements in a standardized manner and to verify through standardized methods that the luminescent nanomaterial meets the required properties.
Numeric values to be spe...view more

ISO TR 19733:2019 This document provides a matrix which links key properties of graphene and related two-dimensional (2D) materials to commercially available measurement techniques. The matrix includes measurement techniques to characterize chemical, physical, electrical, optical, thermal and mechanical properties of graphene and related 2D materials.

IEC TS 62607-4-7:2018 provides a method for the determination of magnetic impurities in anode nanomaterials for energy storage devices using an Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES), including test overview, reagents, apparatus, test procedures, test results and test report.
IEC TS 62607-4-7:2018 applies to the determination of the total content of magnetic impurities (iron, cobalt, chromium, and nickel) ≥ 0,02 mg/kg which can be attracted by magnet.

IEC TS 62876-2-1:2018 establishes a general stability testing programme to verify the stability of the performance of nanomaterials and nano-enabled photovoltaic devices (NePV) devices. These devices are used as subassemblies for the fabrication of photovoltaic modules through a combination with other components. This testing programme defines standardized degradation conditions, methodologies and data assessment for technologies. The results of these tests define a stability under standardized ...view more

IEC TS 62565-4-2:2018 specifies the essential general and optical requirements of monodisperse luminescent nanomaterials used in general lighting and display products to enable their reliable mass production and quality control during the manufacturing process. This document does not address mixtures or agglomerations of luminescent nanomaterials.
In addition, this document enables the customer to specify requirements in a standardized manner and to verify through standardized methods that the ...view more

IEC TS 62607-4-6:2018(E) provides a method for determination of carbon content of nano electrode materials by infrared absorption spectroscopy method. The method is applicable to carbon contents of mass fraction between 0,001 % and 100 %.
This method will enable customers to:
a) decide whether or not a nano electrode material is usable, and
b) select a nano electrode material with suitable carbon content for its application.
This document includes:
- recommendations for sample preparation,...view more

ISO/TS 80004-13:2017 lists terms and definitions for graphene and related two-dimensional (2D) materials, and includes related terms naming production methods, properties and their characterization.
It is intended to facilitate communication between organizations and individuals in research, industry and other interested parties and those who interact with them.

ISO/TS 80004-11:2017 lists terms and definitions, and specifies an extensible taxonomic terminology framework for nanolayers, nanocoatings, nanofilms, and related terms in the field of nanotechnologies.

IEC TS 62607-4-5:2017(E) provides a standardized method for the determination of electrochemical properties of cathode nanomaterials such as lithium iron phosphate (LFP) for electrical energy storage devices. This method will enable the industry to:
decide whether or not a cathode nanomaterial is usable, and
select a cathode nanomaterial suitable for their application.  This document includes:
recommendations for sample preparation,
outlines of the experimental procedures used to me...view more

IEC TS 80004-9: 2017(E) specifies terms and definitions for electrotechnical products and systems reliant on nanomaterials for their essential functionalities. It is intended to facilitate communications between organizations and individuals in industry and those who interact with them.

IEC TS 62607-3-2:2017(E) specifies a method for determining the mass of a sample of QD dispersion after the removal of impurities and surfactant ligands through heating at high temperatures.

IEC TS 62844:2016(E) provides a recommended methodology for identifying relevant parameters of nanomaterials as well as providing generic guidelines on implementation of quality assessment and environment/health/safety assessment for nano-enabled/nano-enhanced electrotechnical products.

IEC TS 62607-4-2:2016(E), which is a Technical Specification, provides a standardized method for the determination of the density of cathode nanomaterials in powder form used for electrical energy storage devices. This method provides users with a key control characteristic to decide whether or not a cathode nanomaterial is usable, or suitable for their application. This document includes definitions of terminology used in this document, recommendations for sample preparation, outlines of the ex...view more