Nanomanufacturing - Key control characteristics - Part 6-1: Graphene-based material - Volume resistivity: four probe method

IEC TS 62607-6-1:2020 establishes a standardized method to determine the electrical key control characteristic
– volume resistivity
for powder consisting of graphene-based material like flakes of graphene, few layer graphene and/or reduced graphene oxide after preparation of a sample in pellet form by
– four probe method
using powder resistivity measurement system.
The volume resistivity is a measure of the quality of powder-type graphene products in terms of electrical property and reflects the density-dependency shown in a pellet of powder-type graphene.
The volume conductivity can directly be derived from the volume resistivity.
Typical application areas are industries that use powder-type graphene products for graphene manufacture, potential developers, and users who produce graphene-based products. As the volume resistivity measured according to this document requires the preparation of a sample in the form of a pellet, this document describes in detail
– an apparatus to prepare consistently a test sample, the pellet,
– the preparation of the pellet starting from powder-type graphene,
– the measurement procedure to measure the volume resistivity (or volume conductivity) of the pellet, and
– the data analysis, the interpretation and reporting of the results.

General Information

Status
Published
Publication Date
07-Jul-2020
Current Stage
PPUB - Publication issued
Start Date
30-Jul-2020
Completion Date
08-Jul-2020
Ref Project

Buy Standard

Technical specification
IEC TS 62607-6-1:2020 - Nanomanufacturing - Key control characteristics - Part 6-1: Graphene-based material - Volume resistivity: four probe method
English language
32 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC TS 62607-6-1
®

Edition 1.0 2020-07

TECHNICAL
SPECIFICATION

colour
inside


Nanomanufacturing – Key control characteristics –
Part 6-1: Graphene-based material – Volume resistivity: four probe method

IEC TS 62607-6-1:2020-07(en)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2020 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.

---------------------- Page: 2 ----------------------
IEC TS 62607-6-1

®


Edition 1.0 2020-07




TECHNICAL



SPECIFICATION








colour

inside










Nanomanufacturing – Key control characteristics –

Part 6-1: Graphene-based material – Volume resistivity: four probe method


























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 07.120 ISBN 978-2-8322-8561-9




  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – IEC TS 62607-6-1:2020 © IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
3.1 General terms . 8
3.2 Key control characteristics . 8
3.3 Terms related to measurements . 8
4 Sample preparation . 10
5 Measurement of volume resistivity of graphene pellet . 10
5.1 Description of the measurement apparatus . 10
5.2 Determination of sample amount . 1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.