ASTM E353-19e1
(Test Method)Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
SIGNIFICANCE AND USE
4.1 These test methods for the chemical analysis of metals and alloys are primarily intended as referee methods to test such materials for compliance with compositional specifications, particularly those under the jurisdiction of ASTM Committee A01 on Steel, Stainless Steel, and Related Alloys. It is assumed that all who use these test methods will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory under appropriate quality control practices such as those described in Guide E882.
SCOPE
1.1 These test methods cover the chemical analysis of stainless, heat-resisting, maraging, and other similar chromium-nickel-iron alloys having chemical compositions within the following limits:
Element
Composition Range, %
Aluminum
0.002
to 5.50
Boron
0.001
to 0.20
Carbon
0.01
to 1.50
Chromium
0.01
to 35.00
Cobalt
0.01
to 15.00
Niobium
0.01
to 4.00
Copper
0.01
to 5.00
Lead
0.001
to 0.50
Manganese
0.01
to 20.00
Molybdenum
0.01
to 7.00
Nickel
0.01
to 48.00
Nitrogen
0.001
to 0.50
Phosphorus
0.002
to 0.35
Selenium
0.01
to 0.50
Silicon
0.01
to 4.00
Sulfur
0.002
to 0.50
Tantalum
0.01
to 0.80
Tin
0.001
to 0.05
Titanium
0.01
to 4.50
Tungsten
0.01
to 4.50
Vanadium
0.005
to 1.00
Zirconium
0.001
to 0.20
1.2 The test methods in this standard are contained in the sections indicated below:
Sections
Aluminum, Total, by the 8-Quinolinol Gravimetric Method (0.20 % to 7.00 %)
119–126
Aluminum, Total, by the 8-Quinolinol Spectrophotometric Method (0.003 % to 0.20 %)
71–81
Carbon, Total, by the Combustion–Thermal Conductivity Method–Discontinued 1986
153–163
Carbon, Total, by the Combustion Gravimetric Method (0.05 % to 1.50 %)–Discontinued 2013
98–108
Chromium by the Atomic Absorption Spectrometry Method (0.006 % to 1.00 %)
202–211
Chromium by the Peroxydisulfate Oxidation–Titration Method (0.10 % to 35.00 %)
212–220
Chromium by the Peroxydisulfate-Oxidation Titrimetric Method-Discontinued 1980
145–152
Cobalt by the Ion-Exchange–Potentiometric Titration Method (2 % to 15 %)
53–60
Cobalt by the Nitroso-R-Salt Spectrophotometric Method (0.01 % to 5.0 %)
61–70
Copper by the Neocuproine Spectrophotometric Method (0.01 % to 5.00) %)
109–118
Copper by the Sulfide Precipitation-Electrodeposition Gravimetric Method (0.01 % to 5.00 %)
82–89
Lead by the Ion-Exchange-Atomic Absorption Spectrometry Method (0.001 % to 0.50 %)
127–136
Manganese by the Periodate Spectrophotometric Method (0.01 % to 5.00 %)
9–18
Molybdenum by the Ion Exchange–8-Hydroxyquinoline Gravimetric Method
242–249
Molybdenum by the Thiocyanate Spectrophotometric Method (0.01 % to 1.50 %)
190–201
Nickel by the Dimethylglyoxime Gravimetric Method (0.1 % to 48.0 %)
172–179
Phosphorus by the Alkalimetric Method (0.02 % to 0.35 %)
164–171
Phosphorus by the Molybdenum Blue Spectrophotometric Method (0.002 % to 0.35 %)
19–30
Silicon by the Gravimetric Method (0.05 % to 4.00 %)
46–52
Sulfur by the Gravimetric Method-Discontinued 1988
30–36
Sulfur by the Combustion-Iodate Titration Method (0.005 % to 0.5 %)-Discontinued 2014
37–45
Sulfur by the Chromatographic Gravimetric Method-Discontinued 1980
137–144
Tin by the Solvent Extraction–Atomic Absorption Spectrometry Method (0.002 % to 0.10 %)
180–189
Tin by the Sulfide ...
General Information
Relations
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
´1
Designation: E353 − 19
Standard Test Methods for
Chemical Analysis of Stainless, Heat-Resisting, Maraging,
1
and Other Similar Chromium-Nickel-Iron Alloys
This standard is issued under the fixed designation E353; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1
ε NOTE—Editorial corrections were made in Table 5 in February 2022.
1. Scope
Sections
Chromium by the Peroxydisulfate Oxidation–Titration 212–220
1.1 These test methods cover the chemical analysis of
Method (0.10 % to 35.00 %)
stainless, heat-resisting, maraging, and other similar Chromium by the Peroxydisulfate-Oxidation Titrimetric 145–152
Method-Discontinued 1980
chromium-nickel-iron alloys having chemical compositions
Cobalt by the Ion-Exchange–Potentiometric Titration 53–60
within the following limits:
Method (2%to15%)
Cobalt by the Nitroso-R-Salt Spectrophotometric 61–70
Element Composition Range, %
Method (0.01 % to 5.0 %)
Aluminum 0.002 to 5.50
Copper by the Neocuproine Spectrophotometric Method 109–118
Boron 0.001 to 0.20
(0.01%to5.00)%)
Carbon 0.01 to 1.50
Copper by the Sulfide Precipitation-Electrodeposition 82–89
Chromium 0.01 to 35.00
Gravimetric Method (0.01 % to 5.00 %)
Cobalt 0.01 to 15.00
Lead by the Ion-Exchange-Atomic Absorption 127–136
Niobium 0.01 to 4.00
Spectrometry Method (0.001 % to 0.50 %)
Copper 0.01 to 5.00
Manganese by the Periodate Spectrophotometric 9–18
Lead 0.001 to 0.50
Method (0.01 % to 5.00 %)
Manganese 0.01 to 20.00
Molybdenum by the Ion Exchange–8-Hydroxyquinoline 242–249
Molybdenum 0.01 to 7.00
Gravimetric Method
Nickel 0.01 to 48.00
Molybdenum by the Thiocyanate Spectrophotometric 190–201
Nitrogen 0.001 to 0.50
Method (0.01 % to 1.50 %)
Phosphorus 0.002 to 0.35
Nickel by the Dimethylglyoxime Gravimetric Method (0.1 172–179
Selenium 0.01 to 0.50
%to48.0%)
Silicon 0.01 to 4.00
Phosphorus by the Alkalimetric Method (0.02 % to 164–171
Sulfur 0.002 to 0.50
0.35 %)
Tantalum 0.01 to 0.80
Phosphorus by the Molybdenum Blue 19–30
Tin 0.001 to 0.05
Spectrophotometric Method (0.002 % to 0.35 %)
Titanium 0.01 to 4.50
Silicon by the Gravimetric Method (0.05 % to 4.00 %) 46–52
Tungsten 0.01 to 4.50
Sulfur by the Gravimetric Method-Discontinued 1988 30–36
Vanadium 0.005 to 1.00
Sulfur by the Combustion-Iodate Titration Method (0.005 37–45
Zirconium 0.001 to 0.20
%to0.5%)-Discontinued 2014
1.2 The test methods in this standard are contained in the Sulfur by the Chromatographic Gravimetric Method- 137–144
Discontinued 1980
sections indicated below:
Tin by the Solvent Extraction–Atomic Absorption 180–189
Sections
Spectrometry Method (0.002 % to 0.10 %)
Aluminum, Total, by the 8-Quinolinol Gravimetric 119–126 Tin by the Sulfide Precipitation-Iodometric Titration 90–97
Method (0.20 % to 7.00 %)
Method (0.01 % to 0.05 %)
Aluminum, Total, by the 8-Quinolinol Spectrophotometric 71–81 Titanium by the Diantipyrylmethane Spectrophotometric 231–241
Method (0.003 % to 0.20 %)
Method (0.01 % to 0.35 %)
Carbon, Total, by the Combustion–Thermal Conductivity 153–163 Vanadium by the Atomic Absorption Spectrometry 221–230
Method–Discontinued 1986
Method (0.006 % to 0.15 %)
Carbon, Total, by the Combustion Gravimetric Method 98–108
1.3 Test methods for the determination of carbon and sulfur
(0.05 % to 1.50 %)–Discontinued 2013
Chromium by the Atomic Absorption Spectrometry 202–211 not included in this standard can be found in Test Methods
Method (0.006 % to 1.00 %)
E1019.
1.4 Some of the composition ranges given in 1.1 are too
1
broad to be covered by a single test method and therefore this
These test methods are under the jurisdiction of ASTM Committee E01 on
Analytical Chemistry for Metals, Ores, and Related Materials and are the direct
standard contains multiple test methods for some elements.
responsibility of Subcommittee E01.01 on Iron, Steel, and Ferroalloys.
The user must select the proper test method by matching the
Current edition approved Nov. 15, 2019. Published February 2020. Originally
information given in the Scope and Interference sections of
approved in 1968. Last previous edition approved in 2014 as E353–14. DOI:
10.1520/E0353-19E01. each method with the composition of the alloy to be analyzed.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
´1
E353 − 19
1.5 The values stated in SI units are to be regarded as E1806 Practice for Sampling S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.