ASTM F1019M-00(2018)

Standard Specification for Steel Deck Gear Stowage Box [Metric]

ABSTRACT
This specification covers the material and design requirements for the manufacture of two types of steel deck gear stowage boxes. This specification, though, does not include life preserver or pyrotechnic stowages. The materials used in the construction of this box and its packaging shall be free of asbestos and cadmium, and the entire finished assembly shall be free of weld spatter, slag, splinters, sharp edges, projections, and other defects that may be hazardous to personnel.
SCOPE
1.1 This specification covers the design, material, and manufacture of steel deck gear stowage boxes.  
1.2 This specification shall not be used for life preserver or pyrotechnic stowage.  
1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are included for information only and are not considered standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

• Status: Historical
• Publication Date: 31-Mar-2018
• ICS: 21.200 - Gears
• ICS: 47.020.50 - Deck equipment and installations
• Technical Committee: F25 - Ships and Marine Technology
• Drafting Committee: F25.03 - Outfitting and Deck Machinery

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F1019M − 00 (Reapproved 2018) An American National Standard
Standard Specification for
1
Steel Deck Gear Stowage Box (Metric)
This standard is issued under the fixed designation F1019M; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 3.1.1 Type I—Conforming to all dimensions in Fig. 1, Fig. 2,
Fig. 3, Fig. 4, Fig. 5, Fig. 6, Fig. 7, Fig. 8, and Fig. 9.
1.1 This specification covers the design, material, and
3.1.2 Type II—Conforming only to Fig. 1 configuration and
manufacture of steel deck gear stowage boxes.
meeting the requirements of Sections 4 – 7, dimensions and
1.2 This specification shall not be used for life preserver or
material specification made to fit unique requirements of
pyrotechnic stowage.
customer.
1.3 The values stated in SI units are to be regarded as
4. Ordering Information
standard. The values given in parentheses after SI units are
included for information only and are not considered standard.
4.1 Order using this ASTM designation, year of issue, and
type.
1.4 This international standard was developed in accor-
dance with internationally recognized principles on standard-
5. Materials and Manufacture
ization established in the Decision on Principles for the
Development of International Standards, Guides and Recom- 5.1 Materials:
mendations issued by the World Trade Organization Technical 5.1.1 The steel for the deck box shall be in accordance with
Barriers to Trade (TBT) Committee. Specification A36/A36M.
5.1.2 Nuts, bolts, and washers shall be corrosion-resistant
2. Referenced Documents materials.
2 5.1.3 Materials used in construction of this box and its
2.1 ASTM Standards:
packaging shall be free of asbestos and cadmium.
A36/A36M Specification for Carbon Structural Steel
A123/A123M Specification for Zinc (Hot-Dip Galvanized) 5.2 Manufacture:
Coatings on Iron and Steel Products 5.2.1 Stowage boxes shall be constructed in accordance
with figures appearing in this standard.
2.2 Other Documents:
3
5.2.2 Welding shall be in accordance with ABS Rules for
ABS Rules for Building and Classing Steel Vessels
4 Building and Classing Steel Vessels or AWS D1.1 Structural
SSPC Specification 6
5
Welding Code unless otherwise specified.
AWS D1.1 Structural Welding Code
6. Dimensions and Tolerances
3. Classification
6.1 Dimensions are as indicated.
3.1 Deck Gear Stowage Boxes, shall be the following types:
1
6.2 Tolerance—1.5 mm (6 ⁄16 in.).
7. Workmanship, Finish, and Appearance
1
This specification is under the jurisdiction of ASTM Committee F25 on Ships
7.1 The entire assembly shall be free of weld spatter, slag,
and Marine Technology and is the direct responsibility of Subcommittee F25.03 on
Outfitting and Deck Machinery.
splinters, sharp edges, projections, and other defects that may
Current edition approved April 1, 2018. Published May 2018. Originally
be hazardous to personnel.
approved in 1986. Last previous edition approved in 2012 as F1019M – 00 (2012).
DOI: 10.1520/F1019M-00R18.
7.2 The box shall be cleaned after assembl
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: F1019M − 00 (Reapproved 2012) F1019M − 00 (Reapproved An2018)American National Standard
Standard Specification for
1
Steel Deck Gear Stowage Box [Metric]
This standard is issued under the fixed designation F1019M; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This specification covers the design, material, and manufacture of steel deck gear stowage boxes.
1.2 This specification shall not be used for life preserver or pyrotechnic stowage.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
after SI units are included for information only and are not considered standard.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
2
2.1 ASTM Standards:
A36/A36M Specification for Carbon Structural Steel
A123/A123M Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
2.2 Other Documents:
3
ABS Rules for Building and Classing Steel Vessels
4
SSPC Specification 6
5
AWS D1.1 Structural Welding Code
3. Classification
3.1 Deck Gear Stowage Boxes, shall be the following types:
3.1.1 Type I—Conforming to all dimensions in Fig. 1, Fig. 2, Fig. 3, Fig. 4, Fig. 5, Fig. 6, Fig. 7, Fig. 8, and Fig. 9.
3.1.2 Type II—Conforming only to Fig. 1 configuration and meeting the requirements of Sections 4 – 7, dimensions and material
specification made to fit unique requirements of customer.
4. Ordering Information
4.1 Order using this ASTM designation, year of issue, and type.
5. Materials and Manufacture
5.1 Materials:
5.1.1 The steel for the deck box shall be in accordance with Specification A36/A36M.
5.1.2 Nuts, bolts, and washers shall be corrosion-resistant materials.
5.1.3 Materials used in construction of this box and its packaging shall be free of asbestos and cadmium.
5.2 Manufacture:
5.2.1 Stowage boxes shall be constructed in accordance with figures appearing in this standard.
1
This specification is under the jurisdiction of ASTM Committee F25 on Ships and Marine Technology and is the direct responsibility of Subcommittee F25.03 on
Outfitting and Deck Machinery.
Current edition approved Oct. 1, 2012April 1, 2018. Published October 2012May 2018. Originally approved in 1986. Last previous edition approved in 20062012 as
F1019M – 00 (2006).(2012). DOI: 10.1520/F1019M-00R12.10.1520/F1019M-00R18.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
3
Available from American Bureau of Shipping, Shipping (ABS), ABS Plaza, 16855 Northchase Dr., Houston
...