ASTM F1310-90

Specification for 65-Gallon Dispensing Tank (Withdrawn 1996)

SCOPE
1.1 This specification covers the design and manufacture of a 65-gallon dispensing tank and foundation.
1.2 This tank is suitable for local and remote filling and venting with the head not to exceed 65 ft.
1.3 This tank has been designed for the storage of petroleum base and other cleaning products of a non-corrosive composition.
1.4 The values stated in inch-pound units are to be regarded as the standard.

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-1989
• Withdrawal Date: 09-Nov-1996
• ICS: 23.020.10 - Stationary containers and tanks
• Technical Committee: F25 - Ships and Marine Technology
• Drafting Committee: F25.03 - Outfitting and Deck Machinery

Standards Content (Sample)

Designation: F 1310 – 90 An American National Standard
AMERICAN SOCIETY FOR TESTING AND MATERIALS
100 Barr Harbor Dr., West Conshohocken, PA 19428
Reprinted from the Annual Book of ASTM Standards. Copyright ASTM
Standard Specification for
1
65-Gallon Dispensing Tank
This standard is issued under the fixed designation F 1310; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
8
1. Scope Structural Welding Code American Bureau of Shipping
9
Rules for Building and Classing Steel Vessels
1.1 This specification covers the design and manufacture of
a 65-gallon dispensing tank and foundation.
3. Ordering Information
1.2 This tank is suitable for local and remote filling and
3.1 Tanks ordered under this specification shall include the
venting with the head not to exceed 65 ft.
following:
1.3 This tank has been designed for the storage of petroleum
3.1.1 ASTM designation, title and date of this specification,
base and other cleaning products of a non-corrosive composi-
3.1.2 Quantity (number of tanks), and
tion.
3.1.3 Exterior coating of tank, foundation, and tray.
1.4 The values stated in inch-pound units are to be regarded
as the standard.
4. Materials and Manufacture
4.1 Materials:
2. Referenced Documents
4.1.1 Faucet, brass—see Specification B 584, UNS Nos.
2.1 ASTM Standards:
2 C85400/C85700.
A 36/A 36M Specification for Structural Steel
4.1.2 Cap and Plugs, brass—see Specification B 16.
A 181/A 181M Specification for Forgings, Carbon Steel for
3 4.1.3 Flash Arrestor, brass—see Specification B 36, UNS
General Purpose Piping
No. C23000, H01 (optional).
A 182/A 182M Specification for Forged or Rolled Alloy-
4.1.4 Angle and Channel, steel—see Specification A 36.
Steel Pipe Flanges, Forged Fittings, and Valves and Parts
3 4.1.5 Vacuum Breaker Assembly and Couplings, stainless
for High-Temperature Service
steel—see Specification A 182, Type 316 (optional).
A 307 Specification for Carbon Steel Bolts and Studs,
4
4.1.6 Tank Body and Separators, hot rolled steel—see
60 000 PSI Tensile Strength
4 Specification A 569.
A 563 Specification for Carbon and Alloy Steel Nuts
4.1.7 bolts, carbon steel—see Specification A 307, Grade A.
A 569/A 569M Specification for Steel, Carbon (0.15 maxi-
4.1.8 Nuts, carbon steel—see Specification A 563, Grade A.
mum, percent), Hot Rolled Sheet and Strip, Commercial
5
4.1.9 Flanges, forged steel—see Specification A 181, Grade
Quality
II.
B 16 Specification for Free Cutting Brass Rod, Bar, and
6
4.2 Manufacture:
Shapes for Use in Screw Machines
4.2.1 Flanges shall be in accordance with ANSI B 16.5.
B 36 Specification for Brass Plate, Sheet, Strip and Rolled
6
4.2.2 Construction of the tank shall be all welded steel as
Bar
shown in Figs. 1-3.
B 584 Specification for Copper Alloy Sand Castings, for
6 4.2.3 Welding shall be in accordance with American Bureau
General Application
of Shipping Rules for Building and Classing Steel Vessels or
2.2 ANSI Standards:
7 AWS D1.1.
ANSI B 16.5 Pipe Flanges and Flanged Fittings
2.3 Other Documents:
5. Performance Requirements
American Welding Society Publication, AWS D1.1—
5.1 Tanks furnished to this specification are intended for use
in systems having a working pressure not exceeding 30 psig.
5.2 Each tank shall be tested hydrostatically to a pressure of
1
This specification is under the jurisdiction of ASTM Committee F-25 on at l
...