ASTM D841-12

Standard Specification for Nitration Grade Toluene

ABSTRACT
This specification covers the standard requirements for nitration grade toluene. The material shall be tested and sampled in accordance with standard test methods and practices and shall conform to the following requirements: volume of non-aromatic hydrocarbons; acid wash color; copper strip corrosion; appearance which shall be a clear liquid, free of sediment and haze; color in the platinum-cobalt scale; and distillation range.
SCOPE
1.1 This specification covers nitration grade toluene.  
1.2 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 Consult OSHA regulations, supplier's Material Safety Data Sheets, and local regulations for all materials used in this specification.

General Information

• Status: Historical
• Publication Date: 31-Oct-2012
• ICS: 71.080.15 - Aromatic hydrocarbons
• ICS: 87.060.30 - Solvents
• Technical Committee: D16 - Aromatic, Industrial, Specialty and Related Chemicals
• Drafting Committee: D16.01 - Benzene, Toluene, Xylenes, Cyclohexane and Their Derivatives

Relations

• Replaces: ASTM D841-11 - Standard Specification for Nitration Grade Toluene
• Effective Date: 01-Nov-2012
• Replaced By: ASTM D841-13 - Standard Specification for Nitration Grade Toluene
• Effective Date: 01-Feb-2013
• Referred By: ASTM D1133-13(2021) - Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents
• Effective Date: 01-Nov-2012
• Referred By: ASTM D4790-23 - Standard Terminology of Aromatic Hydrocarbons and Related Chemicals
• Effective Date: 01-Nov-2012
• Referred By: ASTM F945-22 - Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
• Effective Date: 01-Nov-2012
• Referred By: ASTM D1726-11(2019) - Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
• Effective Date: 01-Nov-2012
• Referred By: ASTM D1747-09(2019) - Standard Test Method for Refractive Index of Viscous Materials
• Effective Date: 01-Nov-2012
• Referred By: ASTM D5917-15(2019) - Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
• Effective Date: 01-Nov-2012
• Referred By: ASTM D914-12(2019) - Standard Test Methods for Ethylcellulose
• Effective Date: 01-Nov-2012
• Referred By: ASTM D2572-19 - Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
• Effective Date: 01-Nov-2012

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:D841 −12
StandardSpecification for
1
Nitration Grade Toluene
This standard is issued under the fixed designation D841; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
3
1. Scope* 2.2 Federal Specification:
PPP-C-2020 PackagingofChemicals,Liquid,Dry,andPaste
1.1 This specification covers nitration grade toluene.
2.3 Other Document:
1.2 The following applies to all specified limits in this
OSHA Regulations, 29 CFR paragraphs 1910.1000 and
standard: for purposes of determining conformance with this
4
1910.1200
standard, an observed value or a calculated value shall be
rounded off “to the nearest unit” in the last right-hand digit
3. Properties
used in expressing the specification limit, in accordance with
the rounding-off method of Practice E29.
3.1 Nitration Grade Toluene shall conform to the following
requirements:
1.3 Consult OSHA regulations, supplier’s Material Safety
Data Sheets, and local regulations for all materials used in this
Property Specification ASTM Test
A
Method
specification.
Nonaromatic hydrocarbons, max, volume % 1.5 (1.2) D2360 or
(wt %) D7504
2. Referenced Documents
Acid wash color, max pass with 2 D848
2
Copper corrosion pass (1A or 1B) D849
2.1 ASTM Standards:
B
Appearance .
D848 Test Method for Acid Wash Color of Industrial Aro-
Color, Pt/Co scale, max D1209 or
20
matic Hydrocarbons D5386
Distillation range including the temperature
D849 Test Method for Copper Strip Corrosion by Industrial
110.6°C at 101.3 kPa (760 mm Hg pressure),
Aromatic Hydrocarbons
max, °C 1.0 D850
D850 Test Method for Distillation of Industrial Aromatic
A
Hydrocarbons and Related Materials If more than one method is listed for a property the producer and user should
agree on the reference method.
D1209 Test Method for Color of Clear Liquids (Platinum-
B
Clear liquid free of sediment and haze when observed at 18.3 to 25.6°C (65 to
Cobalt Scale)
78°F).
D2360 Test Method for Trace Impurities in Monocyclic
3.2 See Section 6 for non-mandatory supplementary re-
Aromatic Hydrocarbons by Gas Chromatography
quirements.
D3437 Practice for Sampling and Handling Liquid Cyclic
Products
4. Sampling
D5386 Test Method for Color of Liquids Using Tristimulus
Colorimetry
4.1 The material shall be sampled in accordance with
D7504 Test Method for Trace Impurities in Monocyclic
Practice D3437.
Aromatic Hydrocarbons by Gas Chromatography and
Effective Carbon Number
5. Packaging and Labeling for U.S. Government
E29 Practice for Using Significant Digits in Test Data to
Procurements
Determine Conformance with Specifications
5.1 United States Government procurements shall be pack-
aged and labeled in accordance with the applicable paragraphs
1
This specification is under the jurisdiction of ASTM Committee D16 on
of Fed. Spec. PPP-C-2020.
Aromatic Hydrocarbons and Related Chemicals and is the direct responsibility of
Subcommittee D16.01 on Benzene, Toluene, Xylenes, Cyclohex
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: D841 − 11 D841 − 12
Standard Specification for
1
Nitration Grade Toluene
This standard is issued under the fixed designation D841; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
1.1 This specification covers nitration grade toluene.
1.2 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard,
an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing
the specification limit, in accordance with the rounding-off method of Practice E29.
1.3 Consult OSHA regulations, supplier’s Material Safety Data Sheets, and local regulations for all materials used in this
specification.
2. Referenced Documents
2
2.1 ASTM Standards:
D848 Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
D849 Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
D850 Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
D1209 Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
D2360 Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
D3437 Practice for Sampling and Handling Liquid Cyclic Products
D5386 Test Method for Color of Liquids Using Tristimulus Colorimetry
D7504 Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon
Number
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
3
2.2 Federal Specification:
PPP-C-2020 Packaging of Chemicals, Liquid, Dry, and Paste
2.3 Other Document:
4
OSHA Regulations, 29 CFR paragraphs 1910.1000 and 1910.1200
1
This specification is under the jurisdiction of ASTM Committee D16 on Aromatic Hydrocarbons and Related Chemicals and is the direct responsibility of Subcommittee
D16.01 on Benzene, Toluene, Xylenes, Cyclohexane and Their Derivatives.
Current edition approved July 1, 2011Nov. 1, 2012. Published July 2011December 2012. Originally approved in 1945. Last previous edition approved in 20102011 as
D841 – 10.D841 – 11. DOI: 10.1520/D0841-11.10.1520/D0841-12.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
3
Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://www.dodssp.daps.mil.
4
Available from U.S. Government Printing Office Superintendent of Documents, 732 N. Capitol St., NW, Mail Stop: SDE, Washington, DC 20401, http://
www.access.gpo.gov.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, P
...