ASTM C1661-07
(Guide)Standard Guide for Viewing Systems for Remotely Operated Facilities
Standard Guide for Viewing Systems for Remotely Operated Facilities
SCOPE
1.1 Intent:
1.1.1 This guide establishes the minimum requirements for viewing systems for remotely operated facilities, including hot cells (shielded cells), used for the processing and handling of nuclear and radioactive materials. The intent of this guide is to aid in the design, selection, installation, modification, fabrication, and quality assurance of remote viewing systems to maximize their usefulness and to minimize equipment failures.
1.1.2 It is intended that this guide record the principles and caveats that experience has shown to be essential to the design, fabrication, installation, maintenance, repair, replacement, and, decontamination and decommissioning of remote viewing equipment capable of meeting the stringent demands of operating, dependably and safely, in a hot cell environment where operator visibility is limited due to the radiation exposure hazards.
1.1.3 This guide is intended to apply to methods of remote viewing for nuclear applications but may be applicable to any environment where remote operational viewing is desirable.
1.2 Applicability:
1.2.1 This guide applies to, but is not limited to, radiation hardened and non-radiation hardened cameras (black- and-white and color), lenses, camera housings and positioners, periscopes, through wall/roof viewing, remotely deployable cameras, crane/robot mounted cameras, endoscope cameras, borescopes, video probes, flexible probes, mirrors, lighting, fiber lighting, and support equipment.
1.2.2 This guide is intended to be applicable to equipment used under one or more of the following conditions:
1.2.2.1 The remote operation facility that contains a significant radiation hazard to man or the environment.
1.2.2.2 The facility equipment can neither be accessed directly for purposes of operation or maintenance, nor can the equipment be viewed directly, for example, without shielding viewing windows, periscopes, or a video monitoring system.
1.2.2.3 The facility can be viewed directly but portions of the views are restricted (for example, the back or underside of objects) or where higher magnification or specialized viewing is beneficial.
1.2.3 The remote viewing equipment may be intended for either long-term application (commonly, in excess of several years) or for short-term usage (for example, troubleshooting). Both types of applications are addressed in sections that follow.
1.2.4 This guide is not intended to cover the detailed design and application of remote handling connectors for services (for example, electrical, instrumentation, video, etc.).
1.2.5 The system of units employed in this guide is the metric unit, also known as SI Units, which are commonly used for International Systems, and defined by ASTM/IEEE SI-10, Standard for Use of International System of Units. Some video parameters use traditional units that are not consistent with SI Units but are used widely across the industry. For example, video image format is referred to in "inch" units. (See Table 1.)
1.2.6 Lens and lens element measurements are always in millimeter (mm) units, even where SI Units are not in common usage, as an industry practice. Other SI Units (for example, cm) are rarely used for lenses or lens elements.
1.2.7 Unless otherwise mentioned in this guide radiation exposure refers to gamma energy level in terms of 60Co exposure, and radiation per hour or rad/h refers to instantaneous rate and not cumulative values.
1.3 User Caveats:
1.3.1 This guide does not cover radiation shielding windows used for hot cell viewing. They are covered separately under Guide C 1572.
1.3.2 This guide is not a substitute for applied engineering skills, proven practices and experience. Its purpose is to provide guidance.
1.3.3 The guidance set forth in this guide relating to design of equipment is intended only to inform designers and engineers of these features, conditions, and procedures that have been found necessary or highly desirable to the design, selection...
General Information
Relations
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: C1661 − 07
StandardGuide for
1
Viewing Systems for Remotely Operated Facilities
This standard is issued under the fixed designation C1661; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 1.2.2.3 The facility can be viewed directly but portions of
the views are restricted (for example, the back or underside of
1.1 Intent:
objects) or where higher magnification or specialized viewing
1.1.1 This guide establishes the minimum requirements for
is beneficial.
viewing systems for remotely operated facilities, including hot
1.2.3 The remote viewing equipment may be intended for
cells (shielded cells), used for the processing and handling of
either long-term application (commonly, in excess of several
nuclear and radioactive materials.The intent of this guide is to
years) or for short-term usage (for example, troubleshooting).
aid in the design, selection, installation, modification,
Bothtypesofapplicationsareaddressedinsectionsthatfollow.
fabrication, and quality assurance of remote viewing systems
1.2.4 This guide is not intended to cover the detailed design
to maximize their usefulness and to minimize equipment
andapplicationofremotehandlingconnectorsforservices(for
failures.
example, electrical, instrumentation, video, etc.).
1.1.2 It is intended that this guide record the principles and
1.2.5 The system of units employed in this guide is the
caveatsthatexperiencehasshowntobeessentialtothedesign,
metricunit,alsoknownasSIUnits,whicharecommonlyused
fabrication,installation,maintenance,repair,replacement,and,
for International Systems, and defined by ASTM/IEEESI 10,
decontamination and decommissioning of remote viewing
StandardforUseofInternationalSystemofUnits.Somevideo
equipment capable of meeting the stringent demands of
parameters use traditional units that are not consistent with SI
operating, dependably and safely, in a hot cell environment
Units but are used widely across the industry. For example,
where operator visibility is limited due to the radiation expo-
videoimageformatisreferredtoin“inch”units.(SeeTable1.)
sure hazards.
1.2.6 Lens and lens element measurements are always in
1.1.3 This guide is intended to apply to methods of remote
millimeter(mm)units,evenwhereSIUnitsarenotincommon
viewing for nuclear applications but may be applicable to any
usage, as an industry practice. Other SI Units (for example,
environment where remote operational viewing is desirable.
cm) are rarely used for lenses or lens elements.
1.2 Applicability:
1.2.7 Unless otherwise mentioned in this guide radiation
60
1.2.1 This guide applies to, but is not limited to, radiation
exposure refers to gamma energy level in terms of Co
hardened and non-radiation hardened cameras (black- and-
exposure, and radiation per hour or rad/h refers to instanta-
white and color), lenses, camera housings and positioners,
neous rate and not cumulative values.
periscopes, through wall/roof viewing, remotely deployable
1.3 User Caveats:
cameras, crane/robot mounted cameras, endoscope cameras,
1.3.1 Thisguidedoesnotcoverradiationshieldingwindows
borescopes, video probes, flexible probes, mirrors, lighting,
used for hot cell viewing. They are covered separately under
fiber lighting, and support equipment.
Guide C1572.
1.2.2 This guide is intended to be applicable to equipment
1.3.2 This guide is not a substitute for applied engineering
used under one or more of the following conditions:
skills, proven practices and experience. Its purpose is to
1.2.2.1 The remote operation facility that contains a signifi-
provide guidance.
cant radiation hazard to man or the environment.
1.3.3 The guidance set forth in this guide relating to design
1.2.2.2 The facility equipment can neither be accessed
of equipment is intended only to inform designers and engi-
directly for purposes of operation or maintenance, nor can the
neers of these features, conditions, and procedures that have
equipment be viewed directly, for example, without shielding
been found necessary or highly desirable to the design,
viewing windows, periscopes, or a video monitoring system.
selection, operation and maintenance of reliable remote view-
ing equipment for the subject service conditions.
1.3.4 The guidance set forth in this guide results from
1
This guide is under the jurisdiction ofASTM Committee C26 on Nuclear Fuel
operational experience of conditions, practices, features, lack
Cycle and is the direct responsibility of Subcommittee C26.14 on Remote Systems.
of features, or lessons learned that were found to be sources of
Current edition approved Feb. 1, 2007. Publish
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.