ASTM F1021-18

Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines

ABSTRACT
This specification covers detergent feeders, rinse additive feeders, and sanitizing agent feeders intended to automatically maintain the concentration of additives in the wash, recirculated rinse, or non-recirculated rinse water of commercial spray- type dish-washing and glass-washing machines. Detergent, rinse additive, and sanitizing agent feeders shall be of the following types and styles: Types I, II, III, IV, V, and VI; and Style I; II; III; IV; V; and VI. Materials used shall be free from defects that would adversely affect the performance or maintainability of individual components or of the overall assembly. The feeder shall be complete so that when connected to the specified source of power (electrical or water, or both), the unit can be used for its intended function. Feeders shall be tested in accordance with specified requirements.
SCOPE
1.1 This specification covers detergent feeders, rinse additive feeders, and sanitizing agent feeders intended to automatically maintain the concentration of additives in the wash, recirculated rinse, or non-recirculated rinse water of commercial spray-type dishwashing and glasswashing machines.  
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.  
1.3 The following safety hazards caveat pertains only to the test methods portion, Section 10, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

• Status: Published
• Publication Date: 30-Nov-2018
• ICS: 97.040.40 - Dishwashers
• Technical Committee: F26 - Food Service Equipment
• Drafting Committee: F26.01 - Cleaning and Sanitation Equipment

Relations

• Refers: ASTM F760-93(2017) - Standard Specification for Food Service Equipment Manuals
• Effective Date: 01-Nov-2017
• Refers: ASTM D3951-15 - Standard Practice for Commercial Packaging
• Effective Date: 01-Dec-2015
• Refers: ASTM D3951-18 - Standard Practice for Commercial Packaging
• Effective Date: 01-May-2018
• Referred By: ASTM F1114-22 - Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Washing Machines, Stationary Rack, Water-Driven Rotary Spray Type
• Effective Date: 01-Dec-2018
• Referred By: ASTM F1203-22 - Standard Specification for Washing Machines—Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
• Effective Date: 01-Dec-2018
• Referred By: ASTM F1202-22 - Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
• Effective Date: 01-Dec-2018

Standards Content (Sample)

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation:F1021 −18 An American National Standard
Standard Specification for
Feeders, Detergent, Rinse Agent, and Sanitizing Agent for
1
Commercial Dishwashing and Glasswashing Machines
This standard is issued under the fixed designation F1021; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope F760 Specification for Food Service Equipment Manuals
4
1.1 This specification covers detergent feeders, rinse addi- 2.2 NSF International Standards:
NSF No. 29 Detergent/Chemical Feeders for Commercial
tive feeders, and sanitizing agent feeders intended to automati-
cally maintain the concentration of additives in the wash, Dishwashing Machines
NSF No. 51 Plastic Material and Components Used in Food
recirculated rinse, or non-recirculated rinse water of commer-
cial spray-type dishwashing and glasswashing machines. Equipment
NSF Food Service Equipment Listing
1.2 The values stated in inch-pound units are to be regarded
5
2.3 Underwriters Laboratories Standards:
as the standard. The values given in parentheses are for
UL 73 Motor Operated Appliances
information only.
UL94 Test for Flammability of Plastic Materials for Parts in
1.3 The following safety hazards caveat pertains only to the
Devices and Appliances
test methods portion, Section 10, of this specification: This
UL 746C Standard for Polymeric Materials - Use in Electri-
standard does not purport to address all of the safety concerns,
cal Equipment Evaluations
if any, associated with its use. It is the responsibility of the user
6
2.4 American Society of Sanitary Engineering Standards:
of this standard to establish appropriate safety, health, and
ASSE 1001 Performance Requirements for Atmospheric
environmental practices and determine the applicability of
Type Vacuum Breakers
regulatory limitations prior to use.
1.4 This international standard was developed in accor-
2.5 Building Offıcials and Code Administrators Interna-
7
dance with internationally recognized principles on standard-
tional Standard:
ization established in the Decision on Principles for the
BOCA Basic Plumbing Code
Development of International Standards, Guides and Recom-
mendations issued by the World Trade Organization Technical
3. Terminology
Barriers to Trade (TBT) Committee.
3.1 Definitions:
3.1.1 detergent feeder—a device that automatically feeds
2. Referenced Documents
detergents into wash tanks of commercial dishwashing and
2
2.1 ASTM Standards:
glasswashing machines.
A167 Specification for Stainless and Heat-Resisting
3.1.2 rinse additive feeder—a device that automatically
Chromium-Nickel Steel Plate, Sheet, and Strip (With-
feeds rinse additives into rinse water of commercial dishwash-
3
drawn 2014)
ing and glasswashing machines.
D3951 Practice for Commercial Packaging
3.1.3 sanitizing agent feeder—a device that automatically
feeds sanitizer into rinse water of commercial dishwashing and
1
glasswashing machines.
This specification is under the jurisdiction of ASTM Committee F26 on Food
Service Equipment and is the direct responsibility of Subcommittee F26.01 on
Cleaning and Sanitation Equipment.
Current edition approved Dec. 1, 2018. Published January 2019. Originally
4
approved in 1986. Last previous edition approved in 2013 as F1021 – 95 (2013). Available from NSF International, P.O. Box 130140, 789 N. Dixboro Rd.,Ann
DOI: 10.1520/F1021-18. Arbor, MI 48113-0140, http://www.nsf.org.
2 5
For referenced ASTM standards, visit the ASTM website, www.astm.org, or Available from Underwriters Laboratories (UL), 333 Pfingsten Rd.,
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Northbrook, IL 60062-2096, http://www.ul.com.
6
Standards volume information, refer to the standard’s Document Summary page on Available from ASSE International Chapter of IAPMO, LLC, 18927 Hickory
the ASTM website. Creek Drive, Suite 220, Mokena, Illinois 60448, http://www.asse-plumbing.org.
3 7
The last approved version of this historical standard is referenced on Available from Building Officials and CodeAdministrators International, 4051
www.astm.org. West Flossmoor Rd., Country Club Hills, IL 60477, http://www.iccsafe.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F1021−18
4. Classification 6.1.5 Alternate M
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: F1021 − 95 (Reapproved 2013) F1021 − 18 An American National Standard
Standard Specification for
Feeders, Detergent, Rinse Agent, and Sanitizing Agent for
1
Commercial Dishwashing and Glasswashing Machines
This standard is issued under the fixed designation F1021; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope
1.1 This specification covers detergent feeders, rinse additive feeders, and sanitizing agent feeders intended to automatically
maintain the concentration of additives in the wash, recirculated rinse, or non-recirculated rinse water of commercial spray-type
dishwashing and glasswashing machines.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information
only.
1.3 The following safety hazards caveat pertains only to the test methods portion, Section 10, of this specification: This standard
does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this
standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory
limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
2
2.1 ASTM Standards:
3
A167 Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip (Withdrawn 2014)
D3951 Practice for Commercial Packaging
F760 Specification for Food Service Equipment Manuals
4
2.2 NSF International Standards:
NSF No. 29 Detergent/Chemical Feeders for Commercial Dishwashing Machines
NSF No. 51 Plastic Material and Components Used in Food Equipment
NSF Food Service Equipment Listing
5
2.3 Underwriters Laboratories Standards:
UL 73 Motor Operated Appliances
UL 94 Test for Flammability of Plastic Materials for Parts in Devices and Appliances
UL 73746C Motor Operated AppliancesStandard for Polymeric Materials - Use in Electrical Equipment Evaluations
6
2.4 American Society of Sanitary Engineering Standards:
ASSE 1001 Pipe Applied Atmospheric Performance Requirements for Atmospheric Type Vacuum Breakers
7
2.5 Building Offıcials and Code Administrators International Standard:
BOCA Basic Plumbing Code
1
This specification is under the jurisdiction of ASTM Committee F26 on Food Service Equipment and is the direct responsibility of Subcommittee F26.01 on Cleaning
and Sanitation Equipment.
Current edition approved March 1, 2013Dec. 1, 2018. Published April 2013January 2019. Originally approved in 1986. Last previous edition approved in 20072013 as
F1021 – 95 (2007).(2013). DOI: 10.1520/F1021-95R13.10.1520/F1021-18.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
3
The last approved version of this historical standard is referenced on www.astm.org.
4
Available from NSF International, P.O. Box 130140, 789 N. Dixboro Rd., Ann Arbor, MI 48113-0140, http://www.nsf.org.
5
Available from Underwriters Laboratories (UL), 333 Pfingsten Rd., Northbrook, IL 60062-2096, http://www.ul.com.
6
Available from American Society of Sanitary Engineering, 901 Canterbury, Suite A Westlake, OH 44145,ASSE International Chapter of IAPMO, LLC, 18927 Hickory
Creek Drive, Suite 220, Mokena, Illinois 60448, http://www.asse-plumbing.org.
7
Available from Building Officials and Code Administrators International, 4051 West Flossmoor Rd., Country Club Hills, IL 60477, http://www.iccsafe.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F1021 − 18
3. Terminology
3.1 Definitions:
3.1.1 detergent feeder—a device that automatically feeds detergents into wash tanks of commercial dishwashing and
glasswashing machine
...