ASTM E329-05a

Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction

SCOPE
1.1 This specification defines the minimum requirements for inspection agency personnel or testing agency laboratory personnel, or both, and the minimum technical requirements for equipment and procedures utilized in the testing and inspection of materials used in construction.
1.2 Criteria is provided for evaluating the capability of agency to properly perform designated tests on construction materials, and establishes essential characteristics pertaining to the organization, personnel, facilities, and quality systems of the agency. This specification may be supplemented by more specific criteria and requirements for particular projects.
1.3 This specification can be used as a basis to evaluate an agency and is intended for use in qualifying and/or accrediting agencies, public or private, engaged in the testing and inspection of construction materials. These materials include concrete, steel, soil, masonry and bituminous materials.
1.4 The users of an accredited agency must review the agency's scope of accreditation to ensure the agency has been accredited for its technical competence to perform the tasks requested by the user.

General Information

• Status: Historical
• Publication Date: 14-Jul-2005
• ICS: 91.100.01 - Construction materials in general
• Technical Committee: E36 - Accreditation & Certification
• Drafting Committee: E36.70 - Agencies Performing Construction Inspection, Testing and Special Inspection

Relations

• Replaces: ASTM E329-05 - Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction
• Effective Date: 15-Jul-2005
• Replaced By: ASTM E329-05b - Standard Specification for Agencies Engaged in Construction Inspection and/or Testing
• Effective Date: 15-Sep-2005
• Referred By: ASTM D3666-16 - Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
• Effective Date: 15-Jul-2005
• Referred By: ASTM D3740-19 - Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
• Effective Date: 15-Jul-2005
• Referred By: ASTM E2353-21 - Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
• Effective Date: 15-Jul-2005
• Referred By: ASTM C1077-17 - Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
• Effective Date: 15-Jul-2005
• Referred By: ASTM E2833-12(2018) - Standard Practice for Certification Bodies that Certify Personnel Engaged in Inspection and Testing of Construction Activities and Materials Used in Construction, Including Special Inspection
• Effective Date: 15-Jul-2005
• Referred By: ASTM E543-21 - Standard Specification for Agencies Performing Nondestructive Testing
• Effective Date: 15-Jul-2005
• Referred By: ASTM E699-16 - Standard Specification for Agencies Involved in Testing, Quality Assurance, and Evaluating of Manufactured Building Components
• Effective Date: 15-Jul-2005
• Referred By: ASTM A627-03(2019) - Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
• Effective Date: 15-Jul-2005

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
An American National Standard
Designation: E 329 – 05a
Standard Specification for
Agencies Engaged in Construction Inspection and/or
1
Testing
This standard is issued under the fixed designation E 329; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope D 3666 SpecificationforMinimumRequirementsforAgen-
cies Testing and Inspecting Road and Paving Materials
1.1 Thisspecificationdefinestheminimumrequirementsfor
D 3740 Practice for Minimum Requirements for Agencies
inspection agency personnel or testing agency laboratory
Engaged in the Testing and/or Inspection of Soil and Rock
personnel, or both, and the minimum technical requirements
as Used in Engineering Design and Construction
for equipment and procedures utilized in the testing and
E4 Practices for Force Verification of Testing Machines
inspection of materials used in construction.
E 543 Practice for Agencies Performing Nondestructive
1.2 Criteria is provided for evaluating the capability of
Testing
agency to properly perform designated tests on construction
E 994 Guide for Calibration and Testing Laboratory Ac-
materials, and establishes essential characteristics pertaining to
creditation Systems General Requirements for Operation
the organization, personnel, facilities, and quality systems of
3
and Recognition
the agency. This specification may be supplemented by more
2.2 AASHTO Standard:
specific criteria and requirements for particular projects.
R18 Standard Recommended Practice for Establishing and
1.3 This specification can be used as a basis to evaluate an
Implementing a Quality System for Construction Materi-
agency and is intended for use in qualifying and/or accrediting
4
als Testing Laboratories
agencies, public or private, engaged in the testing and inspec-
2.3 ISO/IEC Standard:
tion of construction materials. These materials include con-
17025 General Requirements for the Competence of Cali-
crete, steel, soil, masonry and bituminous materials.
5
bration and Testing Laboratories
1.4 The users of an accredited agency must review the
agency’s scope of accreditation to ensure the agency has been
3. Terminology
accredited for its technical competence to perform the tasks
3.1 Definitions of Terms Specific to This Standard:
requested by the user.
3.1.1 agency—the organization/body, or part thereof, autho-
2. Referenced Documents rized by the project sponsor or his duly authorized representa-
2
tive to inspect or test construction materials as required by the
2.1 ASTM Standards:
project specifications.
A 880 Practice for Criteria for Use in Evaluation of Testing
3.1.1.1 inspection agency—an agency or testing laboratory
Laboratories and Organizations for Examination and In-
3
that makes visual observations and field measurements of
spection of Steel, Stainless Steel, and Related Alloys
construction materials. It may collect and submit samples,
C 1077 PracticeforLaboratoriesTestingConcreteandCon-
identified with respective portions of the construction, for
crete Aggregates for Use in Construction and Criteria for
laboratory evaluation. The inspection agency/body and testing
Laboratory Evaluation
agency may be one organization or separate organizations.
C 1093 Practice for Accreditation of Testing Agencies for
3.1.1.2 testing agency—an agency or testing laboratory that
Unit Masonry
measures, examines, tests, or otherwise determines the charac-
teristics or performance of materials and products.
1
This specification is under the jurisdiction of ASTM Committee E36 on
3.1.2 bituminous material and mixes, n—as used in con-
ConformityAssessment and is the direct responsibility of Subcommittee E36.70 on
struction, all types of asphalts and tars for pavements.
Construction and Building Testing/Inspection Agencies.
Current edition approved July 15, 2005. Published August 2005. Originally
approved in 1967. Last previous edition approved in 2005 as E 329 – 05.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
4
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Available from American Association of State Highway and Transportation
Standards volume information, refer to the standard’s Document Summary page on Officials (AASHTO), 444 N. Capitol St., NW, Suite 249, Washington, DC 20001.
5
the ASTM website. Available from International Organization for Standardization (ISO), 1 rue de
3
Withdrawn. Varembé, Case postale 56, CH-1211, Geneva 20, Switzerland.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohock
...