ASTM A132-04(2019)

Standard Specification for Ferromolybdenum

ABSTRACT
This specification covers different sizes of two grades of ferromolybdenum. The material shall conform to the requirements as to composition of the following chemical elements: molybdenum, carbon, phosphorus, sulfur, silicon, and copper.
SCOPE
1.1 This specification covers two grades of ferromolybdenum.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

• Status: Published
• Publication Date: 31-Oct-2019
• ICS: 77.100 - Ferroalloys
• Technical Committee: A01 - Steel, Stainless Steel and Related Alloys
• Drafting Committee: A01.18 - Castings

Relations

• Replaces: ASTM A132-04(2014) - Standard Specification for Ferromolybdenum
• Effective Date: 01-Nov-2019
• Refers: ASTM A1025/A1025M-10(2015) - Standard Specification for Ferroalloys and Other Alloying Materials, General Requirements
• Effective Date: 01-Nov-2015
• Refers: ASTM E11-13 - Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
• Effective Date: 01-Oct-2013
• Refers: ASTM A1025/A1025M-10 - Standard Specification for Ferroalloys, General Requirements
• Effective Date: 01-Oct-2010
• Refers: ASTM E11-09e1 - Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
• Effective Date: 01-May-2009
• Refers: ASTM E11-04 - Standard Specification for Wire Cloth and Sieves for Testing Purposes
• Effective Date: 01-May-2004
• Refers: ASTM E11-01 - Standard Specification for Wire Cloth and Sieves for Testing Purposes
• Effective Date: 10-May-2001
• Refers: ASTM E11-95 - Standard Specification for Wire Cloth and Sieves for Testing Purposes
• Effective Date: 10-May-2001
• Referred By: ASTM A1025/A1025M-10(2020) - Standard Specification for Ferroalloys and Other Alloying Materials, General Requirements
• Effective Date: 01-Nov-2019

Standards Content (Sample)

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: A132 −04 (Reapproved 2019)
Standard Specification for
Ferromolybdenum
This standard is issued under the fixed designation A132; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope E11 Specification for Woven Wire Test Sieve Cloth and Test
Sieves
1.1 This specification covers two grades of ferromolybde-
num.
3. General Conditions for Delivery
1.2 The values stated in inch-pound units are to be regarded
3.1 Materials furnished to this specification shall conform to
as standard. The values given in parentheses are mathematical
the requirements of Specification A1025/A1025M, including
conversions to SI units that are provided for information only
any supplementary requirements that are indicated in the
and are not considered standard.
purchase order. Failure to comply with the general require-
1.3 This international standard was developed in accor-
ments of Specification A1025/A1025M constitutes nonconfor-
dance with internationally recognized principles on standard- mance with this specification. In case of conflict between the
ization established in the Decision on Principles for the
requirements of this specification and Specification A1025/
Development of International Standards, Guides and Recom- A1025M, this specification shall prevail.
mendations issued by the World Trade Organization Technical
4. Chemical Requirements
Barriers to Trade (TBT) Committee.
4.1 The material shall conform to the requirements as to
2. Referenced Documents
chemical composition specified in Table 1. The manufacturer
2.1 ASTM Standards: shall furnish an analysis of each shipment showing the per-
A1025/A1025M Specification for Ferroalloys and Other Al- centage of each element specified.
loying Materials, General Requirements
5. Size
5.1 The grades are available in sizes as listed in Table 2.
This specification is under the jurisdiction of ASTM Committee A01 on Steel,
Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee
5.2 The sizes listed in Table 2 are typical as shipped from
A01.18 on Castings.
the manufacturer’s plant. These alloys exhibit varying degrees
Current edition approved Nov. 1, 2019. Published November 2019. Originally
of friability; therefore, some attrition may be expected in
approved in 1963. Last previous edition approved in 2014 as A132 – 04 (2014).
DOI: 10.1520/A0132-04R19.
transit, storage, and handling.
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
6. Keywords
Standards volume information, refer to the standard’s Docum
...