iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D1760-01

(Specification)

Standard Specification for Pressure Treatment of Timber Products (Withdrawn 2006)

Standard Specification for Pressure Treatment of Timber Products (Withdrawn 2006)

SCOPE
1.1 This specification covers treatment of timber products by pressure processes in closed vessels with preservative materials and solutions.  
1.2 This specification is divided into two general sections. Sections 1 - 9 cover requirements relating to all species and commodities, while Tables 1 - 7 show requirements relating to specific species and commodities. The purchaser should note that these individual requirements vary widely and, consequently, great care must be used in applying them in specific instances.  
1.3 The values stated in inch-pound units are to be considered as standard.
WITHDRAWN RATIONALE
This specification covers treatment of timber products by pressure processes in closed vessels with preservative materials and solutions.
Formerly under the jurisdiction of Committee D07 on Wood, this specification was withdrawn in March 2006.

General Information

Status
Withdrawn
Publication Date
09-Apr-2001
Withdrawal Date
07-Mar-2006
ICS
71.100.50 - Wood-protecting chemicals
79.040 - Wood, sawlogs and sawn timber
Technical Committee
D07 - Wood
Drafting Committee
D07.06 - Treatments for Wood Products
Current Stage
Ref Project

Relations

Replaces
ASTM D1760-96 - Standard Specification for Pressure Treatment of Timber Products
Effective Date
10-Apr-2001

Buy Standard

ASTM D1760-01 - Standard Specification for Pressure Treatment of Timber Products (Withdrawn 2006)ASTM D1760-01 - Standard Specification for Pressure Treatment of Timber Products (Withdrawn 2006)
PreviousNext
Technical specification
ASTM D1760-01 - Standard Specification for Pressure Treatment of Timber Products (Withdrawn 2006)
English language
17 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D 1760 – 01
Standard Specification for
1
Pressure Treatment of Timber Products
This standard is issued under the fixed designation D 1760; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope D 1860 Test Method for Moisture and Creosote-Type Pre-
2
servative in Wood
1.1 This specification covers treatment of timber products
D 2085 Test Method for Determining Chloride Used in
by pressure processes in closed vessels with preservative
Calculating Pentachlorophenol in Solutions or Wood
materials and solutions.
2
(Lime Ignition Method)
1.2 This specification is divided into two general sections.
D 2604 Specification for High-Boiling Hydrocarbon Sol-
Sections 1-9 cover requirements relating to all species and
2
vent for Preparing Oil-Borne Preservative Solutions
commodities, while Tables 1-7 show requirements relating to
D 2605 Specification for Volatile Petroleum Solvent (LPG)
specific species and commodities. The purchaser should note
2
for Preparing Pentachlorophenol Solutions
that these individual requirements vary widely and, conse-
D 3225 Specification for Low-Boiling Hydrocarbon Sol-
quently, great care must be used in applying them in specific
2
vent for Oil-Borne Preservatives
instances.
D 5584 Test Methods for Chemical Analysis of Ammonia-
1.3 The values stated in inch-pound units are to be consid-
2
cal Copper Quat Type B (ACQ-B)
ered as standard.
D 5653 Specification for Copper bis (Dimethyldithiocar-
2
2. Referenced Documents
bamate)
D 5654 Specification forAmmoniacal Copper Quat Type B
2.1 ASTM Standards:
2
(ACQ-B)
D 347 Tables for Volume and Specific Gravity Correction
2
D 5655 Test Method for Analysis of Copper Dimeth-
for Creosote and Coal Tar
2
yldithiocarbamate (CDDC)TreatedWood by Colorimetry
D 390 Specification for Coal-Tar Creosote for the Preserva-
tive Treatment of Piles, Poles, and Timbers for Marine,
3. Terminology
2
Land, and Fresh Water Use
2
3.1 Definitions of Terms Specific to This Standard:
D 391 Specification for Creosote-Coal Tar Solution
2
3.1.1 preservative materials and solutions—materials that
D 1272 Specification for Pentachlorophenol
when injected into wood protect it from the destructive action
D 1325 Specification forAmmoniacal CopperArsenate and
2
of fungi, insects, and marine borers.
Ammoniacal Copper Zinc Arsenate
3.1.2 timber products—include round, sawn, and otherwise
D 1326 Methods for Chemical Analysis of Ammoniacal
2
fabricated materials of various species. Examples are utility
Copper Arsenate and Ammoniacal Copper Zinc Arsenate
2
poles, piles, posts, crossties, lumber, timbers, glued laminated
D 1624 Specification for Acid Copper Chromate
2
timbers, plywood, and so forth.
D 1625 Specification for Chromated Copper Arsenate
D 1627 Methods for Chemical Analysis of Acid Copper
ALLTIMBER PRODUCTS
2
Chromate
D 1628 Test Methods for Chemical Analysis of Chromated
4. General Requirements
2
Copper Arsenate
4.1 The following requirements, except as modified, or
2
D 1858 Specification for Creosote-Petroleum Solution
supplemented by Tables 1-7, for the various species and types
of material, apply to each of the treating processes and to all
1 species and types of material. If these requirements are to be
This specification is under the jurisdiction ofASTM Committee D07 on Wood
otherwise modified to meet special conditions, complete de-
and is the direct responsibility of Subcommittee D07.06 on Treatments for Wood
Products.
tailed instructions shall be given by the purchaser or specifier.
Current edition approved April 10, 2001. Published June 2001. Originally
4.1.1 Maximum time duration (total elapsed time of a
published as D 1760 – 60. Last previous edition D 1760 – 96.
treatingphase),maximumtemperature,andmaximumpressure
Some requirements in this specification are similar to those in the Commodities
Standards of the American Wood-Preservers’ Association for treatment of timber limits shall not be exceeded. A phase shall begin when a
products by pressure processes in closed vessels with preservative materials and
change in conditions within the cylinder is initiated and shall
solutions.Acknowledgment is made to theAmerican Wood-Preservers’Association
end when either new conditions are imposed, or the cylinder is
for its development of subject matter used in this specification.
2
emptied of preservative.
Annual Book of ASTM Standards, Vol 04.10.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
D 1760
TABLE 1 Treatment of Lumber, Timbers, Bridge Ties,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D1760-96(Specification)
Standard Specification for Pressure Treatment of Timber Products

SCOPE
1.1 This specification covers treatment of timber products by pressure processes in closed vessels with preservative materials and solutions.  
1.2 This specification is divided into two general sections. Sections 1 - 9 cover requirements relating to all species and commodities, while Tables 1 - 7 show requirements relating to specific species and commodities. The purchaser should note that these individual requirements vary widely and, consequently, great care must be used in applying them in specific instances.  
1.3 The values stated in inch-pound units are to be considered as standard.

  • Technical specification
    17 pages
    English language
    sale 15% off
ASTM
ASTM D1760-96(Specification)
Standard Specification for Pressure Treatment of Timber Products

SCOPE
1.1 This specification covers treatment of timber products by pressure processes in closed vessels with preservative materials and solutions.  
1.2 This specification is divided into two general sections. Sections 1 - 9 cover requirements relating to all species and commodities, while Tables 1 - 7 show requirements relating to specific species and commodities. The purchaser should note that these individual requirements vary widely and, consequently, great care must be used in applying them in specific instances.  
1.3 The values stated in inch-pound units are to be considered as standard.

  • Technical specification
    17 pages
    English language
    sale 15% off
ASTM
ASTM A370-23(Test Method)
Standard Test Methods and Definitions for Mechanical Testing of Steel Products

SIGNIFICANCE AND USE
4.1 The primary use of these test methods is testing to determine the specified mechanical properties of steel, stainless steel, and related alloy products for the evaluation of conformance of such products to a material specification under the jurisdiction of ASTM Committee A01 and its subcommittees as designated by a purchaser in a purchase order or contract.  
4.1.1 These test methods may be and are used by other ASTM Committees and other standards writing bodies for the purpose of conformance testing.  
4.1.2 The material condition at the time of testing, sampling frequency, specimen location and orientation, reporting requirements, and other test parameters are contained in the pertinent material specification or in a general requirement specification for the particular product form.  
4.1.3 Some material specifications require the use of additional test methods not described herein; in such cases, the required test method is described in that material specification or by reference to another appropriate test method standard.  
4.2 These test methods are also suitable to be used for testing of steel, stainless steel and related alloy materials for other purposes, such as incoming material acceptance testing by the purchaser or evaluation of components after service exposure.  
4.2.1 As with any mechanical testing, deviations from either specification limits or expected as-manufactured properties can occur for valid reasons besides deficiency of the original as-fabricated product. These reasons include, but are not limited to: subsequent service degradation from environmental exposure (for example, temperature, corrosion); static or cyclic service stress effects, mechanically-induced damage, material inhomogeneity, anisotropic structure, natural aging of select alloys, further processing not included in the specification, sampling limitations, and measuring equipment calibration uncertainty. There is statistical variation in all aspects of mechanical testin...
SCOPE
1.1 These test methods2 cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys. The various mechanical tests herein described are used to determine properties required in the product specifications. Variations in testing methods are to be avoided, and standard methods of testing are to be followed to obtain reproducible and comparable results. In those cases in which the testing requirements for certain products are unique or at variance with these general procedures, the product specification testing requirements shall control.  
1.2 The following mechanical tests are described:    
Sections  
Tension  
7 to 14  
Bend  
15  
Hardness  
16  
Brinell  
17  
Rockwell  
18  
Portable  
19  
Impact  
20 to 30  
Keywords  
32  
1.3 Annexes covering details peculiar to certain products are appended to these test methods as follows:    
Annex  
Bar Products  
Annex A1  
Tubular Products  
Annex A2  
Fasteners  
Annex A3  
Round Wire Products  
Annex A4  
Significance of Notched-Bar Impact Testing  
Annex A5  
Converting Percentage Elongation of Round Specimens to
Equivalents for Flat Specimens  
Annex A6    
Testing Multi-Wire Strand  
Annex A7  
Rounding of Test Data  
Annex A8  
Methods for Testing Steel Reinforcing Bars  
Annex A9  
Procedure for Use and Control of Heat-cycle Simulation  
Annex A10  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 When these test methods are referenced in a metric product specification, the yield and tensile values may be determined in inch-pound (ksi) units then converted into SI (MPa) units. The elongation determined in inch-pound gauge lengths of 2 in. or 8 in. may be report...

  • Standard
    51 pages
    English language
    sale 15% off
  • Standard
    51 pages
    English language
    sale 15% off
ASTM
ASTM D7816-23(Test Method)
Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins

SIGNIFICANCE AND USE
4.1 This test method enumerates salt tolerant (halophilic) bacteria, and proteolytic bacteria that are also salt tolerant. Under the conditions of this test method those bacteria are equated as halophilic organisms. Salt tolerant proteolytic bacteria have been known to cause damage to hides and skins in raceway brine.
SCOPE
1.1 This test method covers the enumeration of bacteria that can tolerate high salt concentrations or can hydrolyze protein/collagen, or both. This test method is applicable to raceway brine, brine-cured hides and skins, and pre-charge raceway liquor.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM C488-16(2023)(Test Method)
Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation

SIGNIFICANCE AND USE
5.1 Both physical and chemical changes possibly occur from weather exposure, and these changes affect performance properties, service life, and maintenance schedules. For this reason, tests of properties relating to performance shall be made both before and after specific periods of outdoor exposure.  
5.2 This test method recognizes that differing geographical locations, environmental conditions, differences between surface temperatures and ambient temperatures, and test durations have extremely varied effects upon the test results.  
5.3 This test method is to be used for comparative qualitative testing.
SCOPE
1.1 This test method covers out-of-doors exposure testing of finishes that are normally field-applied to thermal insulation and possibly include joints or joint sealants, or both. Such exposure is essential prior to the determination of certain physical properties when the finish is to be exposed to exterior weather conditions. This test method also indicates possible compatibility problems between the joint sealant and the finish as well as the ability of the finish to span a dry joint. This test method is not intended to evaluate mildew resistance, efflorescence, or chemical resistance.  
Note 1: For testing free plastic films, see Practice D1435.  
1.2 This test method does not prescribe the method of application, test duration, or inspection intervals.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM E527-23(Practice)
Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

SIGNIFICANCE AND USE
4.1 The UNS provides a means of correlating many nationally used numbering systems currently administered by societies, trade associations, and individual users and producers of metals and alloys, thereby avoiding confusion caused by use of more than one identification number for the same material; and by the opposite situation of having the same number assigned to two or more entirely different materials. It also provides the uniformity necessary for efficient indexing, record keeping, data storage and retrieval, and cross referencing.  
4.2 A UNS number is not in itself a specification, since it establishes no requirements for form, condition, quality, etc. It is a unified identification of metals and alloys for which controlling limits have been established in specifications published elsewhere.
Note 5: Organizations that issue specifications should report to appropriate UNS number-assigning offices (3.1.2) any specification changes that affect descriptions shown in published UNS listings.
SCOPE
1.1 This practice (Note 1) covers a unified numbering system (UNS) for metals and alloys that have a “commercial standing” (see Note 2), and covers the procedure by which such numbers are assigned. Section 2 describes the system of alphanumeric designations or “numbers” established for each family of metals and alloys. Section 3 outlines the organization established for administering the system. Section 5 describes the procedure for requesting number assignment to metals and alloys for which UNS numbers have not previously been assigned.
Note 1: UNS designations are not to be used for metals and alloys that are not registered under the system described herein, or for any metal or alloy whose composition differs from those registered.
Note 2: The terms “commercial standing,” “production usage,” and other similar terms are intended to apply to metals and alloys in active commercial production and use, although the actual amount of such use will depend, among other things, upon the type of metals and alloys involved and their application.
The various standardizing organizations involved with the individual industries apply their own established criteria to define the status of a metal or alloy in terms of when a UNS designation number will be assigned. For instance, ASTM Committee A01 requires details of heat analysis, mechanical properties, and processing requirements for addition of a new grade or alloy to its specifications. The Copper Development Association requires that the material be “in commercial use (without tonnage limits);” the Aluminum Association requires that the alloy be “offered for sale (not necessarily in commercial use);” the SAE Aerospace Materials Division calls for “repetitive procurement by at least two users.”
Thus, while no universal definition for usage criteria is established, the UNS numbers are intended to identify metals and alloys that are generally in regular production and use. A UNS number will not ordinarily be issued for a material that has just been conceived or that is still in only experimental trial.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM F3083/F3083M-23a(Specification)
Standard Specification for Emergency Conditions, Occupant Safety and Accommodations

ABSTRACT
This specification covers emergency conditions, occupant safety and accommodations for occupants and cargo. The applicant for a design approval must seek the individual guidance of their respective civil aviation authority (CAA) body concerning the use of this standard as part of a certification plan.
SCOPE
1.1 This specification addresses emergency conditions, occupant safety and accommodations for occupants and cargo.  
1.2 The applicant for a design approval must seek the individual guidance of their respective civil aviation authority (CAA) body concerning the use of this standard as part of a certification plan. For information on which CAA regulatory bodies have accepted this standard (in whole or in part) as a means of compliance to their airworthiness regulations (Hereinafter referred to as “the Rules”), refer to ASTM F44 webpage (www.ASTM.org/COMITTEE/F44.htm) which includes CAA website links.  
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    14 pages
    English language
    sale 15% off
  • Technical specification
    14 pages
    English language
    sale 15% off
ASTM
ASTM A788/A788M-23(Specification)
Standard Specification for Steel Forgings, General Requirements

ABSTRACT
This specification covers a group of common requirements that, unless covered by the individual product specification in another ASTM document, applies to steel forgings for general use. Materials shall be produced primarily by either electric-furnace, basic oxygen, vacuum-induction (VIM), or open-hearth melting process. The primary melting may incorporate separate degassing or refining and may be followed by secondary melting, using electro slag (ESR) or vacuum arc remelting (VAR). Steel shall be forged by any of these three classes based on forging temperature: cold-worked forging, hot-cold-worked forging, or hot-worked forging. After forging, specimens shall be allowed to cool prior to reheating for heat treatment. Details of heat and product analyses for the evaluation of chemical composition are thoroughly discussed. Tension and hardness tests shall be conducted to evaluate mechanical properties such as percentage of elongation and reduction of area. Repair welding shall not be allowed unless permitted by the product specification.
SCOPE
1.1 This specification2 covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM:    
ASTM Designation  
Title  
A266/A266M  
Carbon Steel Forgings for Pressure Vessel Components  
A288  
Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators    
A289/A289M  
Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators  
A290/A290M  
Carbon and Alloy Steel Forgings for Rings for Reduction Gears  
A291/A291M  
Steel Forgings, Carbon and Alloy, for Pinions, Gears, and Shafts for Reduction Gears    
A336/A336M  
Alloy Steel Forgings for Pressure and High-Temperature Parts    
A372/A372M  
Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels    
A469/A469M  
Vacuum-Treated Steel Forgings for Generator Rotors  
A470/A470M  
Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts    
A471/A471M  
Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels    
A473  
Stainless Steel Forgings  
A504/A504M  
Wrought Carbon Steel Wheels  
A508/A508M  
Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels  
A541/A541M  
Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components  
A579/A579M  
Superstrength Alloy Steel Forgings  
A592/A592M  
High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels  
A646/A646M  
Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings  
A649/A649M  
Forged Steel Rolls Used for Corrugating Paper Machinery    
A668/A668M  
Steel Forgings, Carbon and Alloy, for General Industrial Use  
A705/A705M  
Age-Hardening Stainless Steel Forgings  
A711/A711M  
Steel Forging Stock  
A723/A723M  
Alloy Steel Forgings for High-Strength Pressure Component Application  
A729/A729M  
Carbon and Alloy Steel Axles, Heat Treated, for Mass Transit and Electric Railway Service  
A765/A765M  
Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements  
A837/A837M  
Steel Forgings, Alloy, for Carburizing Applications  
A859/A859M  
Age-Hardening Alloy Steel Forgings for Pressure Vessel Components  
A891/A891M  
Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels    
A909/A909M  
Steel Forgings, Microalloy, for General Industrial Use  
A965/A965M  
Steel Forgings, Austenitic, for Pressure and High Temperature Parts  
A982/A982M  
Steel Forgings, Stainless, for Compressor and Turbine Airfoils  
A983/A983M  
Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines  
A986/A986M  
Magnetic Particle Examination of Cont...

  • Technical specification
    17 pages
    English language
    sale 15% off
  • Technical specification
    17 pages
    English language
    sale 15% off
ASTM
ASTM A747/A747M-23(Specification)
Standard Specification for Steel Castings, Stainless, Precipitation Hardening

ABSTRACT
This specification covers iron-chromium-nickel-copper corrosion resistance steel castings capable of being strengthened by precipitation hardening heat treatment. The steel shall be made by electric furnace process with or without separate refining such as argon-oxygen decarburization. The steel materials shall also undergo homogenization heat treatment, solution annealing heat treatment, precipitation hardening and shall conform to the required values of temperature and time and cooling treatment. The materials shall conform to the required chemical compositions of carbon, manganese, phosphorus, sulfur, silicon, chromium, nickel, copper, columbium, and nitrogen.
SCOPE
1.1 This specification covers iron-chromium-nickel-copper corrosion-resistant steel castings, capable of being strengthened by precipitation hardening heat treatment.  
1.2 These castings may be used in services requiring corrosion resistance and high strengths at temperatures up to 600 °F [315 °C]. They may be machined in the solution heat-treated condition and subsequently precipitation hardened to the desired high-strength mechanical properties specified in Table S51.1 with little danger of cracking or distortion.  
1.3 The material is not intended for use in the solution heat-treated condition.  
Note 1: If the service environment in which the material is to be used is considered conducive to stress-corrosion cracking, precipitation hardening should be performed at a temperature that will minimize the susceptibility of the material to this type of attack.  
1.4 Supplementary requirements of an optional nature are provided for use at the option of the purchaser. The supplementary requirements shall apply only when specified individually by the purchaser in the purchase order or contract.  
1.5 This specification is expressed in both inch-pound units and in SI units; however, unless the purchase order or contract specifies the applicable M-specification designation (SI units), the inch-pound units shall apply.  
1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. Within the text, the SI units are shown in brackets.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM F2871-23(Specification)
Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire

ABSTRACT
This specification contains the general requirements for the 245/7OR19.5 136/134M radial truck standard reference test. Provided in this specification is a 19.5 rim diameter code standard truck design and construction, standard dimensions, and standard conditions of storage. A reference tire is covered in this specification for braking traction, snow traction, wear evaluations pavement roughness, noise and other forms of test requiring a reference tire. Test methods of the tensile sheet cure, the 300% stress elongation, and tensile sheet strength should be in accordance to the specified testing requirements presented in D3182, and D412. The testing procedure also includes using of Type A durometer centred at the presser foot at a minimum of 6.0 mm, chaking the durometer operation and the state of durometer calibration with rubber reference, determining tire tread hardness by four readings and quickly applying the presser foot to the tire tread without inducing shock.
SCOPE
1.1 This specification covers the general requirements for the 245/70R19.5 136/134M radial truck standard reference test tire. The tire covered by this specification is primarily for use as a reference tire for braking traction, snow traction, and wear performance evaluations, but may also be used for other evaluations, such as pavement roughness, noise, or other tests that require a reference tire.  
1.1.1 Other standard reference test tires are also used for these purposes and are referenced in Section 2.  
1.2 This specification provides a 19.5 rim diameter code standard truck tire design and construction, standard dimensions, and specifies the conditions of storage.  
1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    5 pages
    English language
    sale 15% off
  • Technical specification
    5 pages
    English language
    sale 15% off