ASTM D5751-99(2005)
(Specification)Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
ABSTRACT
This specification covers performance levels for adhesives to be used in laminate joints in nonstructural lumber products. Such products include, but are not limited to, interior and exterior mouldings, window and door components or parts, and bonded lumber panels. This specification is to be used to evaluate adhesives as well as the adhesive bonds in nonstructural-glued-lumber products. Dry test, soak test, elevated temperature test, boil test, and vacuum pressure test shall be performed to meet the requirements prescribed. The precision and bias of exposure condition shall be tested to meet the requirements prescribed.
SCOPE
1.1 This specification covers performance levels for adhesives to be used in laminate joints in nonstructural lumber products. Such products include, but are not limited to, interior and exterior mouldings, window and door components or parts, and bonded lumber panels. This specification is to be used to evaluate adhesives as well as the adhesive bonds in nonstructural-glued-lumber products. Note 1
This specification supersedes the laminate-joint portion of Specification D 3110. Note 2
See and for descriptions of a dry-use-nonstructural adhesive and a wet-use-nonstructural adhesive.
1.2 This specification applies to laminate-joint specimens made under both laboratory and field conditions. See Section for limitations in using this specification to evaluate industrially manufactured laminate joint products.
The following safety caveat applies only to the apparatus and test methods portions, Sections , , , and of this specification:This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.3 The values stated in inch-pound units are to be regarded as standard.
1.4 In this specification, laminate joint refers to both face and edge joints.
1.5 The following index is provided as a guide to the test methods in this specification:SectionApparatus6Conditioning7Material and Preparation of Assemblies and Specimens8Exposure Conditions and Treatments9Testing, Calculation, and Reporting10Note 3
The conditioning needed for various stages in the preparation of the specimens and for the exposure tests are given in Sections 7, 8, and 9.
General Information
Relations
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:D5751 −99(Reapproved2005)
Standard Specification for
Adhesives Used for Laminate Joints in Nonstructural
1
Lumber Products
This standard is issued under the fixed designation D5751; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
NOTE 3—The conditioning needed for various stages in the preparation
1. Scope
of the specimens and for the exposure tests are given in Sections 7, 8, and
1.1 This specification covers performance levels for adhe-
9.
sives to be used in laminate joints in nonstructural lumber
products. Such products include, but are not limited to, interior 2. Referenced Documents
2
andexteriormouldings,windowanddoorcomponentsorparts,
2.1 ASTM Standards:
and bonded lumber panels. This specification is to be used to
D905 Test Method for Strength Properties of Adhesive
evaluate adhesives as well as the adhesive bonds in
Bonds in Shear by Compression Loading
nonstructural-glued-lumber products.
D907 Terminology of Adhesives
D2016 Methods of Test for Moisture Content of Wood
NOTE 1—This specification supersedes the laminate-joint portion of
3
Specification D3110.
(Withdrawn 1987)
NOTE 2—See 3.2.1 and 3.2.2 for descriptions of a dry-use-nonstructural
D2555 PracticeforEstablishingClearWoodStrengthValues
adhesive and a wet-use-nonstructural adhesive.
D3110 Specification for Adhesives Used in Laminate Joints
1.2 This specification applies to laminate-joint specimens
for Nonstructural Glued Lumber Products (Withdrawn
3
made under both laboratory and field conditions. See Section 4
1996)
for limitations in using this specification to evaluate industri-
D5266 Practice for Estimating the Percentage of Wood
ally manufactured laminate joint products.
Failure in Adhesive Bonded Joints
E4 Practices for Force Verification of Testing Machines
1.3 The following safety caveat applies only to the appara-
E6 Terminology Relating to Methods of Mechanical Testing
tus and test methods portions, Sections 6, 7, 8, and 9 of this
E41 Terminology Relating To Conditioning
specification: This standard does not purport to address all of
E177 Practice for Use of the Terms Precision and Bias in
the safety concerns, if any, associated with its use. It is the
ASTM Test Methods
responsibility of the user of this standard to establish appro-
E691 Practice for Conducting an Interlaboratory Study to
priate safety and health practices and determine the applica-
Determine the Precision of a Test Method
bility of regulatory limitations prior to use.
1.4 The values stated in inch-pound units are to be regarded
3. Terminology
as standard.
3.1 Definitions:
1.5 In this specification, laminate joint refers to both face
3.1.1 Many terms in this specification are defined in Termi-
and edge joints.
nologies D907, E6, and E41.
1.6 The following index is provided as a guide to the test
3.1.2 bond, n—the union of materials by adhesives.
methods in this specification:
3.1.3 laminate joint, n—in wood bonding, a joint made by
Section
bonding layers of adherends face-to-face or edge-to-edge to
Apparatus 6
form thicker or wider stock.
Conditioning 7
Material and Preparation of Assemblies and 8
3.1.4 edge joint, n—in wood bonding, a type of laminate
Specimens
Exposure Conditions and Treatments 9 joint made by bonding adherends edge-to-edge with grain
Testing, Calculation, and Reporting 10
directions parallel to form wider stock.
1 2
This specification is under the jurisdiction of ASTM Committee D14 on For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Adhesives and is the direct responsibility of Subcommittee D14.30 on Wood contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Adhesives. Standards volume information, refer to the standard’s Document Summary page on
Current edition approved April 1, 2005. Published May 2005. Originally the ASTM website.
3
approved in 1995. Last previous edition approved in 1999 as D5751 – 99. DOI: The last approved version of this historical standard is referenced on
10.1520/D5751-99R05. www.astm.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
D5751−99(2005)
3.1.5 face joint, n—in wood bonding, a type of laminate temperature. This test method is intended to simulate condi-
joint made by bonding adherends face-to-face with grain tionsthatmightbeexperiencedintransit,furtherprocessing,or
directions parallel to form thicker stock.
in service.
3.2 Definitions of Terms Specific to This Standard:
NOTE 4—These typical service conditions may include stress and t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.