ASTM A99-03(2019)
(Specification)Standard Specification for Ferromanganese
Standard Specification for Ferromanganese
ABSTRACT
This specification covers standards for ferromanganese (Grades A, B, and C), medium-carbon ferromanganese (Grades A, B, C, D, and nitrided) and low-carbon ferromanganese (Grades A and B). The ferroalloys shall conform to manganese, carbon, silicon, phosphorus, sulfur, and nitrogen contents specific to different material grades. Materials shall also adhere to content limits of arsenic, tin, lead and chromium. The material shall be available in standard sizes, tolerances, and friability ratings.
SCOPE
1.1 This specification covers ten grades of ferromanganese, designated as follows:
Standard ferromanganese
Grade A
Grade B
Grade C
Medium-carbon ferromanganese
Grades A, B, C, and D
Nitrided
Low-carbon ferromanganese
Grade A
Grade B
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: A99 −03 (Reapproved 2019)
Standard Specification for
Ferromanganese
This standard is issued under the fixed designationA99; the number immediately following the designation indicates the year of original
adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.Asuperscript
epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope E11 Specification for Woven Wire Test Sieve Cloth and Test
Sieves
1.1 This specification covers ten grades of ferromanganese,
designated as follows:
3. General Conditions for Delivery
Standard ferromanganese Grade A
3.1 Materials furnished to this specification shall conform to
Grade B
Grade C the requirements of Specification A1025/A1025M, including
Medium-carbon ferromanganese Grades A, B, C, and D
any supplementary requirements that are indicated in the
Nitrided
purchase order. Failure to comply with the general require-
Low-carbon ferromanganese Grade A
Grade B ments of Specification A1025/A1025M constitutes nonconfor-
mance with this specification. In case of conflict between the
1.2 The values stated in inch-pound units are to be regarded
requirements of this specification and Specification A1025/
as standard. The values given in parentheses are mathematical
A1025M, this specification shall prevail.
conversions to SI units that are provided for information only
and are not considered standard.
4. Chemical Composition
1.3 This international standard was developed in accor-
4.1 The material shall conform to the requirements as to
dance with internationally recognized principles on standard-
chemical composition specified in Table 1.
ization established in the Decision on Principles for the
Development of International Standards, Guides and Recom- 4.2 The manufacturer shall furnish an analysis of each
mendations issued by the World Trade Organization Technical shipment showing the percentage of each element specified.
Barriers to Trade (TBT) Committee.
5. Size
2. Referenced Documents
5.1 The various grades are available in sizes as listed in
2.1 ASTM Standards: Table 2.
A1025/A1025M Specification for Ferroalloys and Other Al-
5.2 The sizes and friability ratings listed in Table 2 are
loying Materials, General Requirements
typical as shipped from the manufacturer’s plant. These alloys
exhibit varying degrees of friability; therefore, some attrition
may be expected in transit, storage, and handling. A code
This specification is under the jurisdiction of ASTM Committee A01 on Steel,
Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee
system has been developed. Therefore, for this purpose, a
A01.18 on Castings.
number rating for each product type is shown in the last
Current edition approved Nov. 1, 2019. Published November 2019. Originally
column of Table 2. Definitions applicable to these code
approved in 1925. Last previous edition approved in 2014 as A99 – 03 (2014). DOI:
10.1520/A0099-03R19.
numbers are given in Specification A1025/A1025M.
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
6. Keywords
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website. 6.1 ferroalloy; ferromanganese
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
A99 − 03 (2019)
TABLE 1 Chemical Requirements
Nitrided
Low-Carbon
Standard Ferromanganese Medium-Carbon Ferromanganese Medium-
Ferromanganese
Carbon
Ferroman-
Grade A Grade B Grade C Grade A Grade B Grade C Grade D Grade A Grade B
ganese
A
Manganese, % 78.0 to 82.0 76.0 to 78.0 74.0 to 76.0 80.0 to 85.0 80.0 to 85.0 80.0 to 85.0 80.0 to 85.0 75 to 80 85.0 to 90.0 80.0 to 85.0
A
Carbon, max, % 7.5 7.5 7.5 1.5 1.5 1.5 1.5 1.5 As specified 0.75
A
Silicon, max, % 1.2 1.2 1.2 1.5 1.0 0.70 0.35 1.5 2.0 5.0 to 7.0
Phosphorus, max, % 0.35 0.35 0.35 0.30 0.30 0.3
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.