ASTM F1665-01

Standard Specification for Poly(Vinyl Chloride) (PVC)and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence

SCOPE
1.1 This specification covers poly(vinyl chloride)-coated steel barbed wire consisting of two poly(vinyl chloride)-coated strands, with four-point barbs of zinc-coated steel or aluminum alloy wire. Poly(vinyl chloride) hereinafter will be designated PVC.  
1.2 Barbed wire strand wire, produced from three classes of wire coatings, is covered as follows:  
1.2.1 Class 1 , consisting of PVC coating extruded over zinc-coated or aluminum-coated or zinc-5% aluminum-mischmetal alloy-coated steel wire;  
1.2.2 Class 2a , consisting of PVC coating extruded and adhered to zinc-coated or aluminum-coated or zinc-5% aluminum-mischmetal alloy-coated steel wire; and  
1.2.3 Class 2b , consisting of PVC coating fused and adhered to zinc-coated or aluminum-coated or zinc-5% aluminum-mischmetal alloy-coated steel wire.  
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

General Information

• Status: Historical
• Publication Date: 09-Jan-2001
• ICS: 25.220.60 - Organic coatings
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• ICS: 91.090 - External structures
• Technical Committee: F14 - Fences
• Drafting Committee: F14.40 - Chain Link Fence and Wire Accessories

Relations

• Replaces: ASTM F1665-95 - Standard Specification for Poly(Vinyl Chloride) (PVC)and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
• Effective Date: 10-Jan-2001
• Replaced By: ASTM F1665-08 - Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
• Effective Date: 01-Feb-2008
• Referred By: ASTM F1553-11(2022) - Standard Guide for Specifying Chain Link Fence
• Effective Date: 10-Jan-2001
• Referred By: ASTM F2814-09(2015) - Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes
• Effective Date: 10-Jan-2001
• Referred By: ASTM F3204-16 - Standard Guide for Design and Construction of Welded Wire Fence Systems for Security Purposes
• Effective Date: 10-Jan-2001
• Referred By: ASTM F2611-15 - Standard Guide for Design and Construction of Chain Link Security Fencing
• Effective Date: 10-Jan-2001

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F 1665 – 01
Standard Specification for
Poly(Vinyl Chloride) (PVC) and Other Conforming Organic
Polymer-Coated Steel Barbed Wire Used With Chain-Link
1
Fence
This standard is issued under the fixed designation F 1665; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope D 1499 Practice for Operating Light- and Water-Exposure
5
Apparatus (Carbon-Arc Type) for Exposure of Plastics
1.1 This specification covers poly(vinyl chloride) and other
2
F 552 Terminology Relating to Chain Link Fencing
conforming organic polymer-coated steel barbed wire consist-
F 934 SpecificationforStandardColorsforPolymerCoated
ing of two polymer-coated strands, with four-point barbs of
2
Chain Link Fence Materials
zinc-coated steel or aluminum alloy wire. Poly(vinyl chloride)
G 23 Practice for Operating Light-Exposure Apparatus
and other organic polymer coatings hereinafter will be desig-
(Carbon-Arc Type) With and Without Water for Exposure
nated as polymer coating.
6
of Nonmetallic Materials
1.2 Barbed wire strand wire, produced from three classes of
G 26 Practice for Operating Light-Exposure Apparatus
wire coatings, is covered as follows:
(Xenon-Arc Type) With and Without Water for Exposure
1.2.1 Class1, consisting of a polymer coating extruded over
6
of Nonmetallic Materials
zinc-coated or aluminum-coated or zinc-5 % aluminum-
7
2.2 Federal Standard:
mischmetal alloy-coated steel wire;
Fed. Std. No. 123 Marking for Shipments (Civil Agencies)
1.2.2 Class 2a, consisting of a polymer coating extruded
7
2.3 Military Standards:
and adhered to zinc-coated or aluminum-coated or zinc-5 %
MIL-STD-129 Marking for Shipment and Storage
aluminum-mischmetal alloy-coated steel wire; and
MIL-STD-163 Steel Mill Products, Preparation for Ship-
1.2.3 Class 2b, consisting of a polymer coating fused and
ment and Storage
adhered to zinc-coated or aluminum-coated or zinc-5 %
aluminum-mischmetal alloy-coated steel wire.
3. Terminology
1.3 The values stated in inch-pound units are to be regarded
3.1 Definitions—For definitions of terms such as fabric
as the standard. The values given in parentheses are for
(chain-link fence), PVC, and polymer coating, see Terminol-
information only.
ogy F 552.
2. Referenced Documents
4. Classification
2.1 ASTM Standards:
4.1 Polymer-coated steel barbed wire is supplied in a choice
A 90/A90M Test Method for Weight [Mass] of Coating on
2 of two types as follows:
Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
4.1.1 Type I (Standard), with barbs spaced on 5-in. (127-
A 370 Test Methods and Definitions for MechanicalTesting
3 mm) centers; and
of Steel Products
4.1.2 Type II (High Security), with barbs spaced on 3-in.
A 428 Test Method for Weight of Coating on Aluminum-
2
(76-mm) centers.
Coated Iron or Steel Articles
A 700 Practices for Packaging, Marking, and Loading
5. Ordering Information
4
Methods for Steel Products for Domestic Shipment
5.1 Orders for barbed wire purchased in accordance with
this specification shall include the following information:
1
This specification is under the jurisdiction ofASTM Committee F14 on Fences 5.1.1 Quantity (expressed in number of spools);
and is the direct responsibility of Subcommittee F14.40 on Chain Link Fence and
Wire Accessories.
Current edition approved Jan. 10, 2001. Published April 2001. Originally
5
published as F 1665 – 95. Last previous edition F 1665 – 95. Annual Book of ASTM Standards, Vol 08.01.
2 6
Annual Book of ASTM Standards, Vol 01.06. Annual Book of ASTM Standards, Vol 06.01.
3 7
Annual Book of ASTM Standards, Vol 01.03. AvailablefromStandardizationDocumentsOrderDesk,Bldg.4SectionD,700
4
Annual Book of ASTM Standards, Vol 01.05. Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
F 1665
5.1.2 Length of spools (1320 or 1000 ft (402 or 305 m); see 7.2 Class 2a polymer-coated wire shall have the coating
9.4); extruded and adhered to the strand wire that conforms to the
5.1.3 Class of a polymer coating to be applied to metallic- requirements as given in Table 1.
coated steel strand wire; 7.3 Class 2b polymer-coated wire shall have the coating
5.1.4 Color of coating; fused and adhered to the strand wire that conforms to the
5.1.5 Typeofbarbs(galvanizedsteeloraluminumalloy;see requirements as given in Table 1.
6.3);
8. Size and Construction
5.1.6 Type of barbed wire (Type I or II; see 4.1.1 and 4.1.2);
5.1.7 Selectionoftypeofmetalliccoatingonthesteelstrand
8.1 All barb
...