ASTM D3852-07
(Practice)Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid
Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid
SIGNIFICANCE AND USE
This practice is issued to provide information useful in establishing sampling and handling procedures. It is expected that this information will only be utilized in conjunction with an existing health and safety program. The information provided cannot be used as a substitute for expert safety and medical advice, but rather as a supplement to such advice.
SCOPE
1.1 This practice is provided to ensure that phenol and cresylic acid are properly sampled to provide representative specimens for quality assurance analyses and that they are handled in a safe manner. In general, this practice also applies to cresols, xylenols, and some other alkylated phenolic materials; however, specific information regarding these materials should be sought and used if available.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
General Information
Relations
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D3852 − 07
StandardPractice for
1
Sampling and Handling Phenol, Cresols, and Cresylic Acid
This standard is issued under the fixed designation D3852; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* that this information will only be utilized in conjunction with
an existing health and safety program. The information pro-
1.1 This practice is provided to ensure that phenol and
vided cannot be used as a substitute for expert safety and
cresylic acid are properly sampled to provide representative
medical advice, but rather as a supplement to such advice.
specimens for quality assurance analyses and that they are
handled in a safe manner. In general, this practice also applies
4. Description of Products
to cresols, xylenols, and some other alkylated phenolic mate-
rials; however, specific information regarding these materials
4.1 Phenol is a colorless to light pink crystalline material
should be sought and used if available.
which melts at 40 to 41°C (104 to 106°F). Technical and USP
grades melt at lower temperatures.
1.2 The values stated in SI units are to be regarded as the
standard. The values given in parentheses are for information
4.2 Phenol is both extremely hygroscopic and sensitive to
only.
discoloration. Therefore, it cannot be overemphasized that
1.3 This standard does not purport to address all of the
proper precautions must be undertaken when unloading or
safety concerns, if any, associated with its use. It is the
sampling the product. Moisture must be excluded. The use of
responsibility of the user of this standard to establish appro-
sampling devices that contain metals that may catalyze discol-
priate safety and health practices and determine the applica-
oration (iron, copper) must also be avoided.
bility of regulatory limitations prior to use.
4.3 Cresylic acid is a common chemical name applied to
2. Referenced Documents mixtures of alkyl-substituted phenols. Included are mixtures of
2
cresols, xylenols, and higher alkylated phenols. Many cresylic
2.1 ASTM Standards:
acid mixtures contain measurable amounts of phenol.
E300 Practice for Sampling Industrial Chemicals
2.2 Other Documents:
4.4 Most cresylic acid mixtures are liquids at ambient
OSHA Regulations, 29 CFR, paragraphs 1910.1000 and
temperatures.However,atlowtemperatures(<0°C)theysome-
3
1910.1200
timesbecomeveryviscousanddifficulttopour.Somemixtures
U.S. DOT Regulations, 49 CFR Transportation, Subchapter
containing high concentrations of high melting isomers may
3
C, Parts 171 – 180
form thick slurries or become solids at low temperatures.
NFPA No. 704-1996 Standard System for the Identification
4.5 While phenol or cresylic acids are highly dangerous
4
of the Hazards of Materials for Emergency Response
when handled improperly, particularly at the elevated tempera-
3. Significance and Use tures sometimes required to unload tank cars or tank trucks,
handling and sampling need not be hazardous provided the
3.1 This practice is issued to provide information useful in
dangers are recognized. Proper precautionary measures must
establishing sampling and handling procedures. It is expected
be provided and scrupulously adhered to as proscribed by the
MSDS or other locally relevant guidelines.
1
This practice is under the jurisdiction of ASTM Committee D16 on Aromatic
Hydrocarbons and Related Chemicals and is the direct responsibility of Subcom-
4.6 Department of Transportation (DOT) Hazardous Mate-
mittee D16.08 on Handling and Sampling Aromatic and Cyclic Hydrocarbons.
rials Regulations regarding the shipment of this chemical are
Current edition approved Jan. 1, 2007. Published January 2007. Originally
approved in 1979. Last previous edition approved in 2006 as D3852 – 06. DOI:
specified in 49 CFR.
10.1520/D3852-07.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
5. Hazards
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
5.1 For information on toxicity consult the appropriate
the ASTM website.
3 MSDS.
AvailablefromU.S.GovernmentPrintingOfficeSuperintendentofDocuments,
732 N. Capitol St., NW, Mail Stop: SDE, Washington, DC 20401, http://
5.2 Consult current OSHA regulations, suppliers’ material
www.access.gpo.gov.
4
safety data sheets (MSDS), and local regulations for all
Available from National Fire Protection Association (NFPA), 1 Batterymarch
Park, Quincy, MA 02169-7471, http://www.nfpa.org. materials utilized in this practice.
*A Summary of Changes section appears at the end of this
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.