ASTM E2163-01e1
(Guide)Standard Guide for Minimum Training Requirements for Examiners Conducting Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders in Treatment, Probation or Other Similar Programs
Standard Guide for Minimum Training Requirements for Examiners Conducting Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders in Treatment, Probation or Other Similar Programs
SCOPE
1.1 This guide establishes the minimum training required for PDD examiners engaged in the psychophysiological detection of deception (PDD) examinations for applications with individuals in treatment, or probation or parole for sex offenses.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
e1
Designation:E2163–01
Standard Guide for
Minimum Training Requirements for Examiners Conducting
Psychophysiological Detection of Deception (PDD) Testing
of Sex Offenders in Treatment, Probation or Other Similar
1
Programs
This standard is issued under the fixed designation E 2163; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1
e NOTE—Section 5.1 was corrected editorially in October 2006.
1. Scope 5.2 A minimum of 24 h of training must be in the primary
area of sex offender PDD testing to include:
1.1 This guide establishes the minimum training required
5.2.1 Techniques of sexual history disclosure testing,
for PDD examiners engaged in the psychophysiological detec-
5.2.2 Techniques of specific offense issue testing,
tion of deception (PDD) examinations for applications with
5.2.3 Techniques of maintenance testing,
individuals in treatment, or probation or parole for sex of-
5.2.4 Techniques of monitoring testing,
fenses.
5.2.5 Instruction in validated PDD testing formats,
2. Referenced Documents 5.2.6 Pretest interview procedures and formats,
5.2.7 Use of PDD examinations in the treatment and super-
2.1 ASTM Standards:
vision process, and
E 2000 Guide for Minimum Basic Education and Training
5.2.8 Appropriate legal requirements or restrictions.
of Individuals Involved in the Detection of Deception
2
5.3 A minimum of 16 h of specialized training must be
(PDD)
2
given on topics which directly relate to the treatment and
E 2062 Guide for PDD Examination Standards of Practice
supervision of the sex offender. The topics shall include, but
E 2080 Guide for Clinical Psychophysiological Detection
2
are not limited to:
of Deception (PDD) Examinations for Sex Offenders
5.3.1 Behavior and motivation of sex offenders,
3. Terminology
5.3.2 Trauma factors associated with victims or survivors of
sexual assault,
3.1 Definitions:
5.3.3 Overview of the assessment and treatment modalities
3.1.1 basic PDD training—the initial training required to
for sex offenders, and
administer PDD (polygraph) examinations which is set forth in
5.3.4 Sex offender denial.
Guide E 2000.
5.4 Instructors in course material related to PDD testing
4. Significance and Use
must meet the minimum ASTM standards of a primary
instructor for a PDD basic course. Additionally, that instructor
4.1 This practice is intended to ensure that those individuals
shall possess professionally recognized expertise in sex of-
who are administering PDD examinations of sex offenders are
fender testing.
proficient in such testing techniques.
5.4.1 All instructors of sex offender testing courses relating
5. Minimum Requirements for a Qualifying Curriculum
to treatment and supervision shall be qu
...
This May Also Interest You
SIGNIFICANCE AND USE
4.1 A training program provides the theoretical foundation and practical skills necessary for a trainee to become a qualified forensic hair examiner.
4.2 A trainee is directly supervised by a qualified examiner throughout their training. At the end of the training program, a successful trainee is capable of forming opinions, presenting and explaining evidence, and understanding the limitations of analytical results and interpretations based upon sound scientific knowledge, validated procedures, and practical experience.
4.3 A trainee is required to meet the minimum training criteria in Practice E2917 and this practice. It is the laboratory management’s responsibility to ensure the selected trainee has the appropriate educational background. It is recommended that, at a minimum, the trainee possess a bachelor’s degree in a natural science.
4.4 This document outlines lessons, practical exercises, and criteria to monitor and evaluate trainee progress and is designed to be incorporated into an overall laboratory training program.
4.5 Additional training beyond that which is listed here should be made available to the trainee. Such training might include off-site courses, internships, and specialized training by experienced examiners. Continuing education and training will provide a forensic examiner the opportunity to remain current in the field.
4.6 Additional analyses can be performed on hairs that have been chemically altered (for example, dyed hair) or have trace materials on the surface (for example, glitter). Such techniques are beyond the scope of this document.
4.7 This practice addresses the benefit of following microscopical examinations with DNA analysis.
SCOPE
1.1 This practice covers training guidelines for use by forensic laboratory personnel responsible for training forensic examiners that will perform hair examinations, including microscopical comparisons of human hair.
1.2 Forensic hair examiners are trained in accordance with Practice E2917 and the discipline-specific guidelines (Guide E3316) and criteria within this practice.
1.3 This practice contains guidelines that include the tasks, goals, and objectives that allow the trainee to acquire the requisite knowledge, skills, and abilities to independently perform casework in the microscopical examination of hair.
1.4 This practice addresses the correlation between the analytical results of microscopical examinations and the potential for DNA analysis.
1.5 This practice addresses training for the microscopical examination of hairs and not the examination of chemical alterations (for example, hair dye) or trace materials on the surface of hairs (for example, hair care products).
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Standard15 pagesEnglish languagesale 15% off
- Standard15 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
4.1 This guide describes good practices for the collection (5), packaging, and preservation (8.3) of soils in criminal forensic investigations. Some of the information in this guide is demonstrated in its companion video, which is available on-line and is intended as a complementary resource to this guide (6).
4.2 Individual agencies can use this guide to develop agency-specific procedures regarding the collection of soils for forensic applications.
SCOPE
1.1 This standard provides guidance to instruct crime scene professionals in good practices for the documentation, collection, and preservation of soil and other geological evidence for use in criminal investigations. Sampling for environmental geology is outside of its scope. It is designed as a resource for professionals whose job responsibilities include the collection and preservation of soil evidence and for forensic scientists to enable them to advise crime scene investigators.
1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.
1.3 This standard is intended for use by competent forensic science practitioners with the requisite formal education, discipline-specific training (see Practice E2917), and demonstrated proficiency to perform forensic casework.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Guide9 pagesEnglish languagesale 15% off
- Guide9 pagesEnglish languagesale 15% off
SCOPE
1.1 This specification defines the requirements for training and the development of training manuals for the unmanned aircraft systems (UAS) operator.
1.2 The specification addresses the requirements or best practices, or both, for documentation and organization of a professional operator (that is, for compensation and hire) for the purposes of internal training programs and for programs offered to the general public.
1.3 This specification supports professional entities that will receive operator certification by a CAA, and provide standards of practice for self- or third-party audit of operators of UAS.
1.4 The standard case study used to develop this specification focused on operators of light UAS (below 1320 lb/600 kg as defined by EASA), but the specification may be applied to larger aircraft for using other methods of classification (that is, risk based classes and pilot privileges classes).
1.5 Training manuals that do not include all the minimum requirements of this specification may not be referred to as meeting this specification.
1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Technical specification3 pagesEnglish languagesale 15% off
- Technical specification3 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
4.1 The process of selection, training and qualification of personnel involved with NDA measurements is one of the quality assurance elements for an overall quality NDA measurement program.
4.2 This guide describes an approach to selection, qualification, and training of personnel that is to be used in conjunction with other NDA Quality Assurance (QA) program elements. The selection, qualification and training processes can vary and this guide provides one such approach.
4.3 The qualification activities described in this guide assume that NDA personnel are already proficient in general facility operations and safety procedures. The training and activities that developed this proficiency are not covered in this guide.
4.4 This guide describes a basic approach and principles for the qualification of NDA professionals and technical specialists and operators. A different approach may be adopted by the management organization based on its particular organization and facility specifics. However, if a variation of the approach of this guide is applied, the resulting selection, training, and qualification programs must meet the requirements of the facility quality assurance program and should provide all the applicable functions of Section 5.
4.5 This guide may be used as an aid in the preparation of a Training Implementation Plan (TIP) for the Transuranic Waste Characterization Program (TWCP).
4.6 This guide describes education and expertise guidance for NDA auditors due to the importance and complexity of proper oversight of NDA activities.
SCOPE
1.1 This guide contains good practices for the selection, training, qualification, and professional development of personnel performing analysis, calibration, physical measurements, or data review using nondestructive assay equipment, methods, results, or techniques. The guide also covers NDA personnel involved with NDA equipment setup, selection, diagnosis, troubleshooting, or repair. General guidelines for the selection, training, and qualification of NDA auditors are included as well, but at a lower level of detail due to the variability of the personnel’s responsibilities performing this functions. Selection, training, and qualification programs based on this guide are intended to provide assurance that NDA personnel are suitably qualified and experienced personnel (SQEP) to perform their jobs competently. This guide presents a series of options but does not recommend a specific course of action.
This standard guide does not address the qualifications per se of an NDA Manager. However, it is expected that the NDA Manager is familiar with NDA techniques, and can make informed decisions on the acceptability of the assay results. If an NDA Manager does not have adequate technical qualifications in the NDA field, they are recommended to undergo training to gain familiarity in this area.
An NDA Manager with no relevant NDA experience should have access to a Senior NDA Professional who will give guidance for all technical decisions such as applicability and limitation of methods, reasonableness of results, needed upgrades and advantageous development investments.
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Guide8 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
4.1 This guide is intended to be used to assess competencies of qualified individuals who wish to become certified as a UAS Technician through a certification program.
4.2 This guide is intended to be used in concert with a certification provider’s structure and materials for management, exam delivery, and candidate preparation.
4.3 This guide is intended to be used in conjunction with any civil aviation authority’s (CAA’s) guidance or regulations.
4.4 In this guide, a classification system is used based on the equipage of the entire UAS. The purpose of this classification system is to train technicians on the knowledge necessary to maintain the UAS based on the equipage of the entire system. UAS Technicians are commonly responsible for maintaining not just the unmanned aircraft itself, but the control station, data links, and peripheral equipment (off-aircraft equipment) as well. As the level of complexity increases, so must the UAS Technician’s scope of knowledge. This classification system is presented in Table 1.
4.5 Full system classification relies on the highest classification of the individual components of the system.
4.6 This classification model is used as a guide for typical systems of a UAS, not a definitive list.
4.7 For technicians who maintain more than a single model of UAS, a class qualification is recommended (Tables 2-4).
SCOPE
1.1 The purpose of this guide is to address the fundamental subject knowledge, task performance, and task knowledge activities and functions for unmanned aircraft system professionals to be titled unmanned aircraft system technician.
1.2 Technician qualifications include:
1.2.1 Type ratings on specific systems or families of systems can draw appropriate technical content from this guide, as needed, to be applicable to specific models;
1.2.2 The minimum knowledge, skills, and abilities to perform maintenance on Class 1 UAS;
1.2.3 The minimum knowledge, skills, and abilities to perform maintenance on Class 2 UAS; and
1.2.4 The minimum knowledge, skills, and abilities to perform maintenance on Class 3 UAS.
1.3 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Guide10 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
4.1 This guide is intended to be used by individuals and organizations who wish to document an understanding of FOE through a certification program. It is intended to be used in candidate preparation in concert with a certification provider’s structure and materials for certification management, including exam delivery and certification administration.
SCOPE
1.1 The purpose of this guide is to address the fundamental activities and functions for professionals engaged in Foreign Object Elimination (FOE) program activities.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Guide4 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
5.1 As patient use of cannabis and hemp for medical purposes increases and medical professionals are increasingly called upon to provide medical advice, the following requirements and expectations within the medical profession are increasingly significant, requiring:
5.1.1 Availability by patients to qualified medical professionals who can provide safe and objective advice on the medical use of cannabis and hemp,
5.1.2 Clarity by medical professionals on the legal restrictions in their area of jurisdiction to ensure compliance, and
5.1.3 Development of qualified training and certificate programs to ensure safe and quality healthcare for patients.
5.2 The primary objectives of this guide are as follows:
5.2.1 Provide a general overview of the BoK required for the professions listed in Section 7; and
5.2.2 Provide recommendations to form the foundation for training and subsequent recognition/certificate systems that enable consumers, employers, organizational management, government agencies, and others who rely upon medical professionals to distinguish between qualified and non-qualified workers.
5.2.3 Recommend requirements that agencies can use to develop and document the specific criteria used for training or certificate programs.
5.3 Users of this guide shall document deviations from the recommended requirements to inform their clients of the criteria applied in either the training or the certificate programs offered. As the cannabis and hemp industries and medical guidelines mature, this guide will be updated to reflect current thinking and requirements.
5.4 The Bok elements are applicable to certificate programs, while the BoK, experiential and educational elements are applicable to certification process requirements.
SCOPE
1.1 This guide can provide certification bodies, training providers, employers, and certificate issuers, with best-practice guidance for administering their respective programs for medical-related professions within the cannabis and hemp industries.
1.2 This guide recommends requirements for experience, training, education, and the body of knowledge (BoK) necessary for medical-related professions within the cannabis and hemp industries listed in Table 1.
1.3 For purposes of this guide, a medical professional is defined as a person qualified and licensed as required by the jurisdiction to provide guidance or recommendations regarding a person's health or fitness.
1.4 This guide provides recommendations for articulating professional requirements for training and education or earning certificates. It is part of a series of guides denoting certification requirements for professions within the cannabis and hemp industries (Guides D8346, D8347, D8348), and supporting Practice D8403 for associated certificate programs.
1.5 This guide's content does not supersede requirements for training or earning a certificate defined by jurisdictional entities such as government or other regional regulatory bodies.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Guide4 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
3.1 This guide defines the use and content of Position Task Books.
3.2 A Position Task Book lists all of the observable activities which must be performed to demonstrate the ability to successfully fill a position or operational level.
3.2.1 Each activity, or Task, partly or fully demonstrates the existence in an individual of a specific Behavior.
3.2.2 One or more of these Behaviors signifies that the individual is capable of a particular Competency.
3.2.3 One or more defined Competencies are required for each position or operational level.
3.3 Each Position Task Book used to document the suitability of an individual to perform in a particular position or operational level shall meet the requirements of this guide.
3.4 Nothing in this guide precludes an authority having jurisdiction (AHJ) from adding additional content to a Position Task Book.
3.5 This document may be used by an AHJ to develop Position Task Books.
SCOPE
1.1 This guide defines the use and content of Position Task Books in a “competency-based qualification system.”
1.2 Each Position Task Book lists the competencies, behaviors, and tasks required for successful performance in a position or operational level.
1.3 Position Task Books provide a standard form for documenting the knowledge, skills, and abilities of an individual by observation of that individual’s performance of tasks in a position or at a particular operational level. When all tasks in the PTB are successfully completed, the evaluated individual is considered qualified and eligible for assignment in that position or at that operational level.
1.4 This guide only defines the use of Position Tasks Books and the content required for successful application. It does not define the requirements for any position or operational level.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Guide9 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
4.1 This guide establishes the minimum standard for training Land Search and Rescue Strike Team/Task Force Leaders as it relates to their general, field, and search and rescue specific knowledge, skills, and abilities.
4.2 This guide is to be used by individuals and AHJs that wish to identify the minimum training required for a Land Search and Rescue Strike Team/Task Force Leader.
4.3 Every person who is identified as a Land Search and Rescue Strike Team/Task Force Leader shall have met the requirements in this guide.
4.4 It is the responsibility of the AHJ to determine the depth or detail of training needed to meet the requirements in this guide and it may include additional requirements for its own members.
4.5 This guide by itself is not a training document. It is an outline of the topics required for training or evaluating a Land Search and Rescue Strike Team/Task Force Leader. It can, however, be used to develop, or as part of, a training document or program.
4.6 This guide does not stand alone and must be used with the referenced documents to provide specific information needed by a Land Search and Rescue Strike Team/Task Force Leader.
4.7 This guide can be used to evaluate a document to determine if its content includes the topics necessary for training a Land Search and Rescue Strike Team/Task Force Leader. Likewise, this guide may be used to evaluate an existing training program to see if it meets the requirements in this guide.
4.8 The knowledge, skills, and abilities presented in the following sections are not in any particular order, and do not represent a training sequence.
4.9 The AHJ will determine the evaluation process to assess a person’s knowledge. This may be by written exam, oral exam, demonstration, or other means specified by the AHJ.
SCOPE
1.1 This guide establishes the minimum training for Land SAR Strike Team/Task Force Leaders as it relates to their general, field, and search and rescue specific knowledge, skills, and abilities.
1.2 A Land SAR Strike Team Leader/Task Force Leader is responsible for direct supervision, general leadership, wellness, and safety of multiple SAR teams and resources operating on all land and water environments, including intertidal areas, but not oceans or swiftwater.
1.3 Type I-IV teams which may utilize personnel trained to this guide are Kind A (wilderness), Kind B (urban), and Kind C (mountainous/alpine), Kind D (disaster/collapse), Kind E (inland water), Kind G (cave), Kind H (mine), Kind I (avalanche), Kind J (evidence/cadaver), Kind K (aircraft), and/or Kind L (unclassified). See Classification F1993.
1.4 A Land SAR Strike Team Leader/Task Force Leader may work in remote areas including urban or disaster areas that may be isolated or have lost their infrastructure.
1.5 Further training may be required depending on the regulations or policies of the Authority Having Jurisdiction (AHJ).
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Guide3 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
5.1 This guide describes the recommended procedure for using software to assist with the identification of indications in digital radiographic images. Some of the concepts presented may be appropriate for other nondestructive test methods.
5.2 When properly applied, the methods and techniques outlined in this guide offer radiographic testing practitioners the potential to improve inspection reliability, reduce inspection cycle time, and harness inspection statistics for improving manufacturing processes.
5.3 The typical goal of a nondestructive test is to identify flaws that exceed the acceptance criteria. Due to the variability and uncertainty present in any inspection process, acceptance thresholds are established so that some acceptable components are discarded in an effort to prevent parts with discontinuities that exceed the acceptance criteria from entering service. This type of error, called a false positive, is considered less critical than a false negative error which would allow a nonconforming part into service. A successful application of AssistDR minimizes the false positive rate while reducing the false negative rate to levels appropriate for the intended application. The methods and techniques described in this guide facilitate achieving this desired outcome.
5.4 With the advent of deep learning, convolutional neural networks, and other forms of artificial intelligence, scenarios become possible where an AssistDR system continues to evolve or learn after qualification for production use. This guide does not address learning-based AssistDR systems. This guide addresses only deterministic systems that have software code and parameters that are fixed after qualification. Note that this limitation does not prohibit the use of this guide for developing a qualification and usage strategy for software using deep learning technology. The training or learning process for the deep learning system would need to be completed before qualification and all ...
SCOPE
1.1 Assisted defect recognition (AssistDR) describes a class of computer algorithms that assist a human operator in making a determination about nondestructive test data. This guide uses the term AssistDR to describe those computer assisted evaluation algorithms and associated software. For the purposes of this guide, the usage of the words “defect,” “evaluate,” “evaluation,” etc., in no way implies that the algorithms are dispositioning or otherwise making an unaided final disposition. Depending on the application, AssistDR computer algorithms detect and optionally classify indications of defects, flaws, discontinuities, or other anomalous signals in the acquired images. Software that does make an unaided final disposition is classified as automated defect recognition (AutoDR). While the concepts discussed in this guide are pertinent to AutoDR applications, additional validation tests or controls may be necessary when implementing AutoDR.
1.2 This guide establishes the minimum considerations for the radiographical examination of components using AssistDR for non-film radiographic test data. Most of the examples and discussion in this guide are built around two-dimensional test data for simplicity. The principles can be applied to three (volumetric computed tomography, for example) or higher dimensional test data.
1.3 The methods and practices described in this guide are intended for the application of AssistDR where image analysis will aid a human operator in the detection and evaluation of indications. The degree to which AssistDR is integrated into the testing and evaluation process will help the user determine the appropriate levels of process qualification and control required. This guide is not intended for applications wishing to employ AutoDR in which there is no human review of the results.
1.4 This guide applies to radiographic examination using an X-ray source. Some of the concepts presented may be ap...
- Guide29 pagesEnglish languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.