ASTM F1021-95

Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines

SCOPE
1.1 This specification covers detergent feeders, rinse additive feeders, and sanitizing agent feeders intended to automatically maintain the concentration of additives in the wash, recirculated rinse, or non-recirculated rinse water of commercial spray-type dishwashing and glasswashing machines.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

General Information

• Status: Historical
• Publication Date: 14-Jun-1995
• Technical Committee: F26 - Food Service Equipment
• Drafting Committee: F26.01 - Cleaning and Sanitation Equipment

Relations

• Replaced By: ASTM F1021-95(2001) - Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines
• Effective Date: 15-Jun-1995
• Referred By: ASTM F1114-22 - Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Washing Machines, Stationary Rack, Water-Driven Rotary Spray Type
• Effective Date: 15-Jun-1995
• Referred By: ASTM F1203-22 - Standard Specification for Washing Machines—Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
• Effective Date: 15-Jun-1995
• Referred By: ASTM F1202-22 - Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
• Effective Date: 15-Jun-1995

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
Designation: F 1021 – 95
Standard Specification for
Feeders, Detergent, Rinse Agent, and Sanitizing Agent for
Commercial Dishwashing and Glasswashing Machines
This standard is issued under the fixed designation F 1021; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope 3. Terminology
1.1 This specification covers detergent feeders, rinse addi- 3.1 Definitions:
tive feeders, and sanitizing agent feeders intended to automati- 3.1.1 detergent feeder—a device that automatically feeds
cally maintain the concentration of additives in the wash, detergents into wash tanks of commercial dishwashing and
recirculated rinse, or non-recirculated rinse water of commer- glasswashing machines.
cial spray-type dishwashing and glasswashing machines. 3.1.2 rinse additive feeder—a device that automatically
1.2 The values stated in inch-pound units are to be regarded feeds rinse additives into rinse water of commercial dishwash-
as the standard. The values given in parentheses are for ing and glasswashing machines.
information only. 3.1.3 sanitizing agent feeder—a device that automatically
feeds sanitizer into rinse water of commercial dishwashing and
2. Referenced Documents
glasswashing machines.
2.1 ASTM Standards:
4. Classification
A 167 Specification for Stainless and Heat-Resisting
Chromium-Nickel Steel Plate, Sheet, and Strip 4.1 General—Detergent, rinse additive, and sanitizing agent
D 3951 Practice for Commercial Packaging feeders shall be of the following types and styles as specified.
F 760 Specification for Food Service Equipment Manuals 4.2 Types:
2.2 NSF International Standards: 4.2.1 Type I—Detergent feeder, concentration sensing or
NSF No. 29 Detergent/Chemical Feeders for Commercial controlling.
Dishwashing Machines 4.2.2 Type II—Detergent feeder, timed delivery.
NSF No. 51 Plastic Material and Components Used in Food 4.2.3 Type III—Rinse additive feeder, flow/pressure, or
Equipment electrically activated.
NSF Food Service Equipment Listing 4.2.4 Type IV—Rinse additive feeder, timed delivery.
2.3 Underwriters Laboratories Standards: 4.2.5 Type V—Sanitizing agent feeder, flow/pressure, or
UL 94 Test for Flammability of Plastic Materials for Parts in electrically activated.
Devices and Appliances 4.2.6 Type VI—Sanitizing agent feeder, timed delivery.
UL 73 Motor Operated Appliances 4.3 Styles:
2.4 American Society of Sanitary Engineering Standards: 4.3.1 Style I—Detergent feeder, powder product.
ASSE 1001 Pipe Applied Atmospheric Vacuum Breakers 4.3.2 Style II—Detergent feeder, liquid product.
2.5 Building Offıcials and Code Administrators Interna- 4.3.3 Style III—Detergent feeder, slurry product.
tional Standard: 4.3.4 Style IV—Detergent feeder, solid cast product.
BOCA Basic Plumbing Code 4.3.5 Style V—Rinse additive feeder, liquid product.
4.3.6 Style VI—Rinse additive feeder, solid cast product.
4.4 All detergent, rinse additive, and sanitizing feeders of
This specification is under the jurisdiction of ASTM Committee F-26 on Food
the same manufacture, classification, and model designation
Service Equipment and is the direct responsibility of Subcommittee F26.01 on
Cleaning and Sanitation Equipment. shall be identical to the extent necessary to ensure interchange-
Current edition approved June 15, 1995. Published August 1995. Originally
ability of component parts, assemblies, and spare parts.
published as F 1021 – 86. Last previous edition F 1021 – 91.
Annual Book of ASTM Standards, Vol 01.03.
5. Ordering Information
Annual Book of ASTM Standards, Vol 15.09.
Annual Book of ASTM Standards, Vol 15.07. 5.1 Purchasers should select from the types and styles of
Available from NSF International, P. O. Box 1468, Ann Arbor, MI 48106.
feeders from this specification and include the following
Available from Underwriters Laboratories, Inc., 333 Pfingsten Rd., Northbrook,
information in the procurement document:
IL 60062.
Available from American Society of Sanitary Engineering, P.O. Box 9712, Bay 5.1.1 Title, number, and year of this specification.
Village, OH 44140.
5.1.2 Type and style of feeder(s) required.
Available from Building Officials and Code Administrators International, 4051
5.1.2.1 Individual feeders.
West Flossmoor Rd., Country Club Hills, IL 60477.
Copyright © ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, United States.
F 1021
5.1.2.2 Combined feeder systems. lent. Metal parts not in direct contact with the chemical
5.1.3 Type and manufacturer’s model and electrical charac- solution shall be of corrosion-resisting material.
teristics of dishmachine or glasswasher for which the feeder is
8. Performance Requirements
intended.
8.1 Performance Standards Compliance—Detergent and
5.1.4 Manufacturer’s certification, when required (see Sec-
rinse additive feeders shall conform to the requirements of UL
tion 11).
73.
6. Materials and Manufacture
9. Quality Assurance
6.1 All materials shall be as follows:
9.1 Unless otherwise specified in the contract or purchase
6.1.1 Materials used shall be free from defects that would
order, the manufacturer is responsible for the performance of
adversely affect the performance or maintainability of indi-
all requirements as indicated in this specification. Except as
vidual components or of the overall assembly. Detergent, rinse
otherwise specified in the contract or purchase order, the
additive, and sanitizing agent feeders shall
...