ASTM C1180-18
(Terminology)Standard Terminology of Mortar and Grout for Unit Masonry
Standard Terminology of Mortar and Grout for Unit Masonry
SCOPE
1.1 This terminology covers terms, definitions of terms, descriptions of terms, nomenclature, and explanations of abbreviations, acronyms, and symbols specifically associated with standards under the jurisdiction of ASTM Committee C12 on Mortars and Grouts for Unit Masonry.
1.2 The definitions and descriptions of terms in this terminology pertain to Test Methods C780, C1019, C1148, C1324, and C1403; Specifications C144, C270, C404, C476, C887, C1142, and C1384; Practice C946; and Guide C1586.
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: C1180 − 18
Standard Terminology of
1
Mortar and Grout for Unit Masonry
This standard is issued under the fixed designation C1180; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* C1148 Test Method for Measuring the Drying Shrinkage of
Masonry Mortar
1.1 This terminology covers terms, definitions of terms,
C1232 Terminology for Masonry
descriptions of terms, nomenclature, and explanations of
C1324 Test Method for Examination and Analysis of Hard-
abbreviations, acronyms, and symbols specifically associated
ened Masonry Mortar
with standards under the jurisdiction ofASTM Committee C12
C1384 Specification for Admixtures for Masonry Mortars
on Mortars and Grouts for Unit Masonry.
C1403 Test Method for Rate of Water Absorption of Ma-
1.2 The definitions and descriptions of terms in this termi-
sonry Mortars
nology pertain to Test Methods C780, C1019, C1148, C1324,
C1586 Guide for Quality Assurance of Mortars
and C1403; Specifications C144, C270, C404, C476, C887,
C1142, and C1384; Practice C946; and Guide C1586.
3. Terminology
1.3 This international standard was developed in accor-
3.1 The definitions in this terminology are specific to mortar
dance with internationally recognized principles on standard-
and grout. For terminology specific to (1) clay masonry units;
ization established in the Decision on Principles for the
(2) concrete masonry units; (3) autoclaved aerated concrete
Development of International Standards, Guides and Recom-
masonry units; (4) roofing tile units; and (5) masonry, see
mendations issued by the World Trade Organization Technical
Terminology C1232.
Barriers to Trade (TBT) Committee.
3.2 Terms and Their Definitions:
2. Referenced Documents admixture, n—substance other than the Specification C270
prescribed materials of water, aggregate, and cementitious
2
2.1 ASTM Standards:
materials that is added to a masonry mortar as an ingredient
C144 Specification for Aggregate for Masonry Mortar
to improve one or more chemical or physical properties of
C270 Specification for Mortar for Unit Masonry
the conventional masonry mortar.
C404 Specification for Aggregates for Masonry Grout
C476 Specification for Grout for Masonry
aggregates, n—a granular mineral material such as natural
C780 Test Method for Preconstruction and Construction
sand, manufactured sand, gravel, crushed stone, and air
Evaluation of Mortars for Plain and Reinforced Unit
cooled blast furnace slag.
Masonry
cementitious material, n—Committee C12 standards for mor-
C887 Specification for Packaged, Dry, Combined Materials
tar and grout consider the following as cementitious mate-
for Surface Bonding Mortar
rials: Hydraulic cements, pozzolans, hydrated lime, lime
C946 Practice for Construction of Dry-Stacked, Surface-
putty, and ground granulated blast furnance slag.
Bonded Walls
DISCUSSION—Hydraulic cements (such as portland cement, blended
C1019 Test Method for Sampling and Testing Grout
cement, masonry cement, and mortar cement) react with water to
C1142 Specification for Extended Life Mortar for Unit
harden and will do so under water. Pozzolans (such as coal fly ash, raw,
Masonry
or calcined natural pozzolans) react with lime in the presence of
moisture. Hydrated lime and lime putty react with carbon dioxide from
the air. Ground granulated blast furnance slag, blended cements, and
1
some pozzolans may exhibit both hydraulic and pozzolanic properties.
ThisterminologyisunderthejurisdictionofASTMCommitteeC12onMortars
and Grouts for Unit Masonry and is the direct responsibility of Subcommittee
compressive strength, n—the maximum compressive load
C12.08 on Terminology.
Current edition approved Dec. 1, 2018. Published December 2018. Originally
whichaspecimenwillsupportdividedbythecross-sectional
approved in 1991. Last previous edition approved in 2010 as C1180 – 10. DOI:
area of the specimen.
10.1520/C1180-18.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
durability, n—the ability of a material to resist weathering
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
action, chemical attack, abrasion, and other conditions of
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website. service.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
C1180 − 18
flow, n—a laboratory measured mortar property that indicates which are measured and mixed at a centr
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: C1180 − 10 C1180 − 18
Standard Terminology of
1
Mortar and Grout for Unit Masonry
This standard is issued under the fixed designation C1180; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
1.1 This terminology covers terms, definitions of terms, descriptions of terms, nomenclature, and explanations of abbreviations,
acronyms, and symbols specifically associated with standards under the jurisdiction of ASTM Committee C12 on Mortars and
Grouts for Unit Masonry.
1.2 The definitions and descriptions of terms in this terminology pertain to Test Methods C780, C1019, C1148, C1324, and
C1403; Specifications C144, C270, C404, C476, C887, C1142, and C1384; Practice C946; and Guide C1586.
1.3 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
2
2.1 ASTM Standards:
C144 Specification for Aggregate for Masonry Mortar
C270 Specification for Mortar for Unit Masonry
C404 Specification for Aggregates for Masonry Grout
C476 Specification for Grout for Masonry
C780 Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
C887 Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
C946 Practice for Construction of Dry-Stacked, Surface-Bonded Walls
C1019 Test Method for Sampling and Testing Grout
C1142 Specification for Extended Life Mortar for Unit Masonry
C1148 Test Method for Measuring the Drying Shrinkage of Masonry Mortar
C1232 Terminology for Masonry
C1324 Test Method for Examination and Analysis of Hardened Masonry Mortar
C1384 Specification for Admixtures for Masonry Mortars
C1403 Test Method for Rate of Water Absorption of Masonry Mortars
C1586 Guide for Quality Assurance of Mortars
3. Terminology
3.1 The definitions in this terminology are specific to mortar and grout. For terminology specific to (1) clay masonry units; (2)
concrete masonry units; (3) autoclaved aerated concrete masonry units; (4) roofing tile units; and (5) masonry, see Terminology
C1232.
3.2 Terms and Their Definitions:
admixture, n—substance other than the Specification C270 prescribed materials of water, aggregate, and cementitious materials
that is added to a masonry mortar as an ingredient to improve one or more chemical or physical properties of the conventional
masonry mortar.
1
This terminology is under the jurisdiction of ASTM Committee C12 on Mortars and Grouts for Unit Masonry and is the direct responsibility of Subcommittee C12.08
on Terminology.
Current edition approved Dec. 1, 2010Dec. 1, 2018. Published December 2010December 2018. Originally approved in 1991. Last previous edition approved in 20072010
as C1180 – 07.C1180 – 10. DOI: 10.1520/C1180-10.10.1520/C1180-18.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
C1180 − 18
aggregates, n—a granular mineral material such as natural sand, manufactured sand, gravel, crushed stone, and air cooled blast
furnace slag.
cementitious material, n—Committee C12 standards for mortar and grout consider the following as cementitious materials:
Hydraulic cements, pozzolans, hydrated lime, lime putty, and ground granulated blast furnance slag.
DISCUSSION—
Hydraulic cements (such as portland cement, blended cement, masonry cement, and mortar cement) react with water to harden and will do so under
water. Pozzolans (such as coal fly ash, raw, or calcined natural pozzolans) react with lime in the presence of moisture. Hydrated lime and lime putty
react with carbon dioxide from the air. Ground granulated blast furnance slag, blended cements, and some pozzolans may exhibit both hydraulic and
pozzolanic properties.
compressive s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.