EN 13173:2001
(Main)Cathodic protection for steel offshore floating structures
- BACK
- 23-Jan-2001
- 47.020.01
- 77.060
- CEN/TC 219
Cathodic protection for steel offshore floating structures
This EN defines the means to be used to cathodically protect the submerged metallic surfaces of steel offshore floating structures and appurtenances in sea water and saline mud.
Kathodischer Korrosionsschutz für schwimmende Offshore-Anlagen aus Stahl
Diese Europäische Norm definiert die Mittel, die für den kathodischen Korrosionsschutz der eingetauchten metallischen Oberflächen von schwimmenden Offshore-Anlagen aus Stahl und Anlagenzubehör in Meerwasser und salzhaltigem Schlick einzusetzen sind.
Protection cathodique des structures en acier flottant en mer
La présente EN définit les moyens à mettre en oeuvre pour assurer la protection cathodique des parties métalliques submergées des structures en acier flottant en mer et de leurs parties annexes contre la corrosion due à l'eau de mer ou aux fonds marins.
Katodna zaščita za plavajoče jeklene priobalne konstrukcije
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kathodischer Korrosionsschutz für schwimmende Offshore-Anlagen aus StahlProtection cathodique des structures en acier flottant en merCathodic protection for steel offshore floating structures47.020.01Splošni standardi v zvezi z ladjedelništvom in konstrukcijami na morjuGeneral standards related to shipbuilding and marine structures25.220.40Kovinske prevlekeMetallic coatingsICS:Ta slovenski standard je istoveten z:EN 13173:2001SIST EN 13173:2003en01-december-2003SIST EN 13173:200
...
This May Also Interest You
This European Standard covers the general principles of cathodic protection when applied in seawater, brackish waters and marine mud. It is intended to be an introduction, to provide a link between the theoretical aspects and the practical applications, and to constitute a support to the other European Standards devoted to cathodic protection of steel structures in seawater.
This European Standard specifies the criteria required for cathodic protection. It provides recommendations and information on reference electrodes, design considerations and prevention of the secondary effects of cathodic protection.
The practical applications of cathodic protection in seawater are covered by the following standards:
- EN 12495, Cathodic protection for fixed steel offshore structures;
- EN ISO 13174, Cathodic protection of harbour installations (ISO 13174);
- EN 12496, Galvanic anodes for cathodic protection in seawater and saline mud;
- EN 13173, Cathodic protection for steel offshore floating structures;
- EN 16222, Cathodic protection of ship hulls;
- EN 12474, Cathodic protection of submarine pipelines;
- ISO 15589 2, Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines.
For cathodic protection of steel reinforced concrete whether exposed to seawater or to the atmosphere, EN ISO 12696 applies.
- Standard40 pagesEnglish languagesale 10% offe-Library read for×1 day
- 11-Feb-2014
- 30-Aug-2014
- 23.040.99
- 47.020.01
- 77.060
- CEN/TC 219
1.1 General
This European Standard defines the general criteria and recommendations for cathodic protection of immersed external ship hulls and appurtenances.
This European Standard does not cover safety and environmental protection aspects associated with cathodic protection. Relevant national or international regulations and classification society requirements apply.
1.2 Structures
This European Standard covers the cathodic protection of the underwater hulls of ships, boats and other self propelled floating vessels generally used in seawater together with their appurtenances such as rudders, propellers, shafts and stabilisers.
It also covers the cathodic protection of thrusters, sea chests and water intakes (up to the first valve).
It does not cover the protection of internal surfaces such as ballast tanks.
It does not cover steel offshore floating structures which are covered in EN 13173.
1.3 Materials
This European Standard covers the cathodic protection of ship hulls fabricated principally from carbon manganese steels including appurtenances of other ferrous or non-ferrous alloys such as stainless steels and copper alloys, etc.
This European Standard applies to both coated and bare hulls; most hulls are coated.
The cathodic protection system should be designed to ensure that there is a complete control over any galvanic coupling.
This European Standard does not cover the cathodic protection of hulls principally made of other materials such as aluminium alloys, stainless steels or concrete.
1.4 Environment
This European Standard is applicable to the hull and appurtenances in seawater and all waters which could be found during a ship’s world-wide deployment.
- Standard46 pagesEnglish languagesale 10% offe-Library read for×1 day
- 16-Oct-2012
- 29-Apr-2013
- 47.020.01
- 77.060
- CEN/TC 219
This european standard defines the means to be used to cathodically protect the submerged areas of fixed steel offshore structures and appurtenances.
- Standard32 pagesEnglish languagesale 10% offe-Library read for×1 day
- 18-Jan-2000
- 47.020.01
- 77.060
- CEN/TC 219
This European Standard covers the general principles of cathodic protection when applied in seawater, brackish waters and marine mud. It is intended to be an introduction, to provide a link between the theoretical aspects and the practical applications, and to constitute a support to the other European Standards devoted to cathodic protection of steel structures in seawater.
This European Standard specifies the criteria required for cathodic protection. It provides recommendations and information on reference electrodes, design considerations and prevention of the secondary effects of cathodic protection.
The practical applications of cathodic protection in seawater are covered by the following standards:
- EN 12495, Cathodic protection for fixed steel offshore structures;
- EN ISO 13174, Cathodic protection of harbour installations (ISO 13174);
- EN 12496, Galvanic anodes for cathodic protection in seawater and saline mud;
- EN 13173, Cathodic protection for steel offshore floating structures;
- EN 16222, Cathodic protection of ship hulls;
- EN 12474, Cathodic protection of submarine pipelines;
- ISO 15589 2, Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines.
For cathodic protection of steel reinforced concrete whether exposed to seawater or to the atmosphere, EN ISO 12696 applies.
- Standard40 pagesEnglish languagesale 10% offe-Library read for×1 day
- 11-Feb-2014
- 30-Aug-2014
- 23.040.99
- 47.020.01
- 77.060
- CEN/TC 219
1.1 General
This European Standard defines the general criteria and recommendations for cathodic protection of immersed external ship hulls and appurtenances.
This European Standard does not cover safety and environmental protection aspects associated with cathodic protection. Relevant national or international regulations and classification society requirements apply.
1.2 Structures
This European Standard covers the cathodic protection of the underwater hulls of ships, boats and other self propelled floating vessels generally used in seawater together with their appurtenances such as rudders, propellers, shafts and stabilisers.
It also covers the cathodic protection of thrusters, sea chests and water intakes (up to the first valve).
It does not cover the protection of internal surfaces such as ballast tanks.
It does not cover steel offshore floating structures which are covered in EN 13173.
1.3 Materials
This European Standard covers the cathodic protection of ship hulls fabricated principally from carbon manganese steels including appurtenances of other ferrous or non-ferrous alloys such as stainless steels and copper alloys, etc.
This European Standard applies to both coated and bare hulls; most hulls are coated.
The cathodic protection system should be designed to ensure that there is a complete control over any galvanic coupling.
This European Standard does not cover the cathodic protection of hulls principally made of other materials such as aluminium alloys, stainless steels or concrete.
1.4 Environment
This European Standard is applicable to the hull and appurtenances in seawater and all waters which could be found during a ship’s world-wide deployment.
- Standard46 pagesEnglish languagesale 10% offe-Library read for×1 day
- 16-Oct-2012
- 29-Apr-2013
- 47.020.01
- 77.060
- CEN/TC 219
This european standard defines the means to be used to cathodically protect the submerged areas of fixed steel offshore structures and appurtenances.
- Standard32 pagesEnglish languagesale 10% offe-Library read for×1 day
- 18-Jan-2000
- 47.020.01
- 77.060
- CEN/TC 219
This document specifies a continuous measurement method for the determination of the concentration of sulfur dioxide present in ambient air based on the ultraviolet fluorescence measuring principle. This document describes the performance characteristics and sets the relevant minimum criteria required to select an appropriate ultraviolet fluorescence analyser by means of type testing. It also includes the evaluation of the suitability of an analyser for use in a specific fixed site so as to meet the data quality requirements as specified in Annex I of Directive 2008/50/EC [1] and requirements during sampling, calibration and quality assurance for use.
The method is applicable to the determination of the mass concentration of sulphur dioxide present in ambient air up to 1000 µg/m3. This concentration range represents the certification range for sulfur dioxide for type testing.
NOTE 1 It is possible to use other ranges depending on the levels present in ambient air.
NOTE 2 When this document is used for purposes other than for measurements required by Directive 2008/50/EC, the ranges and uncertainty requirements possibly do not apply.
The method covers the determination of ambient air concentrations of sulfur dioxide in locations classified as rural areas, urban-background areas, and for sampling influenced by traffic or industrial sources.
The results are expressed in µg/m3 (at 20 °C and 101,3 kPa).
NOTE 3 1 000 µg/m3 of SO2 corresponds to 376 nmol/mol of SO2.
This document contains information for different groups of users.
Clause 5 to Clause 7 and Annex C and Annex D contain general information about the principles of sulfur dioxide measurement by ultraviolet fluorescence analyser and sampling equipment.
Clause 8 and Annex E are specifically directed towards test houses and laboratories that perform type testing of sulfur dioxide analysers. These sections contain information about:
— type testing conditions, test procedures and test requirements;
— analyser performance requirements;
— evaluation of the type testing results;
— evaluation of the uncertainty of the measurement results of the sulfur dioxide analyser based on the type testing results.
Clause 9 to Clause 11 and Annex F and Annex G are directed towards monitoring networks performing the practical measurements of sulfur dioxide in ambient air. These sections contain information about:
— initial installation of the analyser in the monitoring network and acceptance testing;
— ongoing quality assurance/quality control;
— calculation and reporting of measurement results;
— evaluation of the uncertainty of the measurement results under practical monitoring conditions.
This document represents an evolution of earlier editions (EN 14212:2005 and EN 14212:2012). It is advisable that when equipment is procured it complies fully with this document.
NOTE 4 Type testing performed prior to the publication of this document for the purpose of demonstrating equivalence are still valid.
NOTE 5 Analysers type tested prior to the publication of this document remain valid for use for regulated monitoring purposes.
- Draft108 pagesEnglish languagesale 10% offe-Library read for×1 day
- 17-Dec-2024
- 13.040.20
- 2008/50/EC
- CEN/TC 264
This document specifies the requirements relating to:
Steel X6CrNiTi18-10 (1.4541)
Air melted
Softened
Plates
6 mm < a ≤ 50 mm
500 MPa ≤ Rm ≤ 700 MPa
for aerospace applications.
W.nr: 1.4541.
ASD-STAN designation: FE-PA3601.
- Standard9 pagesEnglish languagesale 10% offe-Library read for×1 day
1.1 Scope of EN 16905 series
This series specifies the requirements, test methods and test conditions for the rating and performance calculation of gas-fired endothermic engine driven heat pumps for heating and/or cooling mode including the engine heat recovery, to be used outdoor.
This series is used in conjunction with:
a) the terms and definitions, EN 16905 1:2023;
b) the safety, EN 16905 2:—1;
c) the requirements, test conditions and test methods, EN 16905 4:—2;
d) the calculation of seasonal performances in heating and cooling mode, EN 16905‐5:2022;
e) the heat pump standards, EN 14511‐2:2022, EN 14511 3:2022 and EN 14825:2022.
This series only applies to appliances with a maximum heat input (based on net calorific value) not exceeding 70 kW at standard rating conditions.
This series only applies to appliances under categories I2H, I2E, I2Er, I2R, I2E(S)B, I2L, I2LL, I2ELL, I2E(R)B, I2ESi, I2E(R), I3P, I3B, I3B/P, II2H3+, II2Er3+, II2H3B/P, II2L3B/P, II2E3B/P, II2ELL3B/P, II2L3P, II2H3P, II2E3P and II2Er3P according to EN 437:2021.
This series only applies to appliances having:
a) gas-fired endothermic engines under the control of fully automatic control systems;
b) closed-system refrigerant circuits in which the refrigerant does not come into direct contact with the fluid to be cooled or heated;
c) where the temperature of the heat transfer fluid of the heating system (heating water circuit) does not exceed 105 °C during normal operation;
d) where the maximum operating pressure in the
1) heating water circuit (if installed) does not exceed 6 bar;
2) domestic hot water circuit (if installed) does not exceed 10 bar.
This series applies to appliances only when used for space heating or space cooling or for refrigeration, with or without heat recovery.
This series is applicable to appliances that are intended to be type tested. Requirements for appliances that are not type tested would need to be subject to further consideration.
1.2 Scope of EN 16905 3
This part of the EN 16905 series specifies the test conditions for the rating of energy parameters of gas-fired endothermic engine driven heat pumps for heating and/or cooling mode including the engine heat recovery.
- Draft21 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies the three-pole temperature compensated circuit breakers, rated from 1 A to 25 A used in aircraft on-board circuits. It describes specific environmental, electrical and mechanical characteristics and the stringency of tests to be applied according to test methods of EN 3841 100.
These circuit breakers are intended for use in aircraft with electrical supplies in accordance with EN 2282.
- Draft21 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.