EN ISO 9342-1:2005

Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005)

ISO 9342-1:2005 specifies requirements for test lenses for the calibration of focimeters that are used for the measurement of spectacle form lenses.

Optik und optische Instrumente - Prüfgläser zur Kalibrierung von Scheitelbrechwert-Messgeräten - Teil 1: Prüfgläser für Scheitelbrechwert-Messgeräte für die Messung von Brillengläsern (ISO 9342-1:2005)

Dieser Teil von ISO 9342 legt Anforderungen an Prüfgläser zur Kalibrierung von Scheitelbrechwert-Mess-geräten, die für die Messung von Brillengläsern verwendet werden, fest.
ANMERKUNG   Die Verwendung anderer Prüfgläser, deren Brechwert im angegebenen Bereich liegt und die bezüglich Genauigkeit und Form gleichwertig gefertigt wurden, jedoch andere Scheitelbrechwerte aufweisen, ist ebenfalls zulässig. Für die Kalibrierung von digital rundenden Scheitelbrechwert-Messgeräten können jedoch nur Prüfgläser mit einem ganz-zahligen Sollscheitelbrechwert, wie in Anhang A beschrieben, verwendet werden.

Optique et instruments d'optique - Verres étalons pour l'étalonnage des frontofocomètres - Partie 1: Verres étalons pour frontofocomètres pour le mesurage des verres de lunettes (ISO 9342-1:2005)

L'ISO 9342-1:2005 spécifie les exigences applicables aux verres étalons pour l'étalonnage des frontofocomètres utilisés pour le mesurage des verres de lunettes.

Optika in optični instrumenti - Preskusne leče za umerjanje fokometrov – 1. del: Preskusne leče za fokometre, ki se uporabljajo za merjenje spektralnih leč (ISO 9342-1:2005)

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-2005
• Withdrawal Date: 18-Jul-2023
• ICS: 11.040.70 - Ophthalmic equipment
• Technical Committee: CEN/TC 170 - Ophthalmic optics
• Drafting Committee: CEN/TC 170 - Ophthalmic optics
• Ref Project: SIST EN ISO 9342-1:2005 - Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005)

Relations

• Replaces: EN ISO 9342:1998 - Optics and optical instruments - Test lenses for calibration of focimeters (ISO 9342:1996)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 9342-1:2023 - Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2023)
• Effective Date: 04-Dec-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9342-1:2005
01-julij-2005
1DGRPHãþD
SIST EN ISO 9342:2000
2SWLNDLQRSWLþQLLQVWUXPHQWL3UHVNXVQHOHþH]DXPHUMDQMHIRNRPHWURY±GHO
3UHVNXVQHOHþH]DIRNRPHWUHNLVHXSRUDEOMDMR]DPHUMHQMHVSHNWUDOQLKOHþ,62

Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test
lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005)
Optik und optische Instrumente - Prüfgläser zur Kalibrierung von Scheitelbrechwert-
Messgeräten - Teil 1: Prüfgläser für Scheitelbrechwert-Messgeräte für die Messung von
Brillengläsern (ISO 9342-1:2005)
Optique et instruments d'optique - Verres étalons pour l'étalonnage des frontofocometres
- Partie 1: Verres étalons pour frontofocometres pour le mesurage des verres de lunettes
(ISO 9342-1:2005)
Ta slovenski standard je istoveten z: EN ISO 9342-1:2005
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
SIST EN ISO 9342-1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9342-1:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 9342-1:2005



EUROPEAN STANDARD
EN ISO 9342-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2005
ICS 11.040.70 Supersedes EN ISO 9342:1998
English version
Optics and optical instruments - Test lenses for calibration of
focimeters - Part 1: Test lenses for focimeters used for
measuring spectacle lenses (ISO 9342-1:2005)
Optique et instruments d'optique - Verres étalons pour Optik und optische Instrumente - Prüfgläser zur
l'étalonnage des frontofocomètres - Partie 1: Verres Kalibrierung von Scheitelbrechwert-Messgeräten - Teil 1:
étalons pour frontofocomètres pour le mesurage des verres Prüfgläser für Scheitelbrechwert-Messgeräte für die
de lunettes (ISO 9342-1:2005) Messung von Brillengläsern (ISO 9342-1:2005)
This European Standard was approved by CEN on 4 April 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9342-1:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9342-1:2005

EN ISO 9342-1:2005 (E)





Foreword


This document (EN ISO 9342-1:2005) has been prepared by Technical Committee ISO/TC 172
"Optics and optical instruments" in collaboration with Technical Committee CEN/TC 170
"Ophthalmic optics", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by November 2005, and conflicting national
standards shall be withdrawn at the latest by November 2005.

This document supersedes EN ISO 9342:1998.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 9342-1:2005 has been approved by CEN as EN ISO 9342-1:2005 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 9342-1:2005


INTERNATIONAL ISO
STANDARD 9342-1
First edition
2005-05-01

Optics and optical instruments — Test
lenses for calibration of focimeters —
Part 1:
Test lenses for focimeters used for
measuring spectacle lenses
Optique et instruments d'optique — Verres étalons pour l'étalonnage
des frontofocomètres —
Partie 1:
...