EN ISO 15750-2:2008

Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l (ISO 15750-2:2002)

This part of ISO 15750 specifies the characteristics and dimensions of non-removable head (tight head) drums, manufactured from steel sheet, having a total capacity of 212 l, 216,5 l and 230 l.
It also specifies a method for measuring the total capacity and brimful capacity, and a draining test method.

Verpackung - Stahlfässer - Teil 2: Spundfässer mit einem Gesamtvolumen von mindestens 212 l, 216,5 l und 230 l (ISO 15750-2:2002)

Dieser Teil von ISO 15750 legt die Eigenschaften und Maße von Spundfässern aus Stahlblech mit einem
Gesamtvolumen von mindestens 212 l, 216,5 l und 230 l fest.
Er legt ebenfalls ein Verfahren für das Messen des Gesamtvolumens und des Überlaufvolumens sowie ein
Prüfverfahren für die Entleerung fest.

Emballages - Fûts en acier - Partie 2: Fûts à ouverture partielle d'une capacité totale minimale de 212 l, 216,5 l et 230 l (ISO 15750-2:2002)

Embalaža - Jekleni sodi - 2. del: Sodi z nesnemljivim pokrovom (ozka odprtina) z najmanjšo prostornino 212 l, 216,5 l in 230 l (ISO 15750-2:2002)

General Information

• Status: Published
• Publication Date: 17-Jun-2008
• Withdrawal Date: 30-Dec-2008
• ICS: 55.140 - Barrels. Drums. Canisters
• Technical Committee: CEN/TC 261 - Packaging
• Drafting Committee: CEN/TC 261/SC 5 - Primary packaging and transport packaging
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 18-Jun-2008
• Due Date: 06-May-2009
• Completion Date: 18-Jun-2008
• Ref Project: SIST EN ISO 15750-2:2008 - Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l (ISO 15750-2:2002)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15750-2:2008
01-oktober-2008
Embalaža - Jekleni sodi - 2. del: Sodi z nesnemljivim pokrovom (ozka odprtina) z
najmanjšo prostornino 212 l, 216,5 l in 230 l (ISO 15750-2:2002)
Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a
minimum total capacity of 212 l, 216,5 l and 230 l (ISO 15750-2:2002)
Verpackung - Stahlfässer - Teil 2: Spundfässer mit einem Gesamtvolumen von
mindestens 212 l, 216,5 l und 230 l (ISO 15750-2:2002)
Emballages - Futs en acier - Partie 2: Futs a ouverture partielle d'une capacité totale
minimale de 212 l, 216,5 l et 230 l (ISO 15750-2:2002)
Ta slovenski standard je istoveten z: EN ISO 15750-2:2008
ICS:
55.140 6RGL.RYLQVNLVRGL5RþNH Barrels. Drums. Canisters
SIST EN ISO 15750-2:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15750-2:2008

---------------------- Page: 2 ----------------------

SIST EN ISO 15750-2:2008
EUROPEAN STANDARD
EN ISO 15750-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2008
ICS 55.140

English Version
Packaging - Steel drums - Part 2: Non-removable head (tight
head) drums with a minimum total capacity of 212 l, 216,5 l and
230 l (ISO 15750-2:2002)
Emballages - Fûts en acier - Partie 2: Fûts à ouverture Verpackung - Stahlfässer - Teil 2: Spundfässer mit einem
partielle d'une capacité totale minimale de 212 l, 216,5 l et Gesamtvolumen von mindestens 212 l, 216,5 l und 230 l
230 l (ISO 15750-2:2002) (ISO 15750-2:2002)
This European Standard was approved by CEN on 16 May 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15750-2:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15750-2:2008
EN ISO 15750-2:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 15750-2:2008
EN ISO 15750-2:2008 (E)
Foreword
The text of ISO 15750-2:2002 has been prepared by Technical Committee ISO/TC 122 “Packaging” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 15750-2:2008 by
Technical Committee CEN/TC 261 “Packaging” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2008, and conflicting national standards shall be withdrawn
at the latest by December 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 15750-2:2002 has been approved by CEN as a EN ISO 15750-2:2008 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 15750-2:2008

---------------------- Page: 6 ----------------------

SIST EN ISO 15750-2:2008
INTERNATIONAL ISO
STANDARD 15750-2
First edition
2002-04-15
Packaging — Steel drums —
Part 2:
Non-remo
...