FprEN 16510-2-1
(Main)Residential solid fuel burning appliances - Part 2-1: Roomheaters
Residential solid fuel burning appliances - Part 2-1: Roomheaters
This Part 2-1 of EN 16510 is applicable to freestanding or inset roomheaters fired by solid fuel, without functional modification that operate with fire doors either as closed only or as closed or open.
The appliances covered by this Part 2-1 of EN 16510 provide heat into the space where they are installed. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These appliances may burn one or more types of the following solid fuels in accordance with the appliance manufacturer’s instructions:
- wood logs;
- compressed untreated wood;
- wood pellets;
- solid minearal fuels;
- peat briquettes.
This Part 2-1 of EN 16510 is not applicable to appliances with fan assisted combustion air or appliances that are mechanically fed.
This Part 2-1 of EN 16510 is to be used in conjunction with EN 16510 1 of which it is an integral part.
Häusliche Feuerstätten für feste Brennstoffe - Teil 2-1: Raumheizer
Dieser Teil 2-1 von EN 16510 gilt für freistehende oder eingebaute Raumheizer für feste Brennstoffe, ohne funktionalen Änderungen, die mit Feuerraumtüren entweder geschlossen oder geschlossen und offen betrieben werden können. Diese Europäische Norm ist nur für nicht mechanisch beschickte Raumheizer anwendbar.
Die Feuerstätten, die mit diesem Teil 2-1 der EN 16510 abgedeckt werden, beheizen den Aufstellungsraum. Sofern sie mit wasserführenden Bauteilen ausgestattet sind, liefern sie Heizwasser und/oder dienen der Zentralbeheizung. Diese Feuerstätten können entsprechend der Bedienungsanleitung des Herstellers entweder feste mineralische Brennstoffe, Torfbriketts, Holzscheite, Holzbriketts oder mehrere dieser Brennstoffe verfeuern.
Dieser Teil 2-1 gilt nicht für Feuerstätten mit Verbrennungsluftgebläse oder mechanisch beschickte Feuerstätten.
Appareils de chauffage domestiques à combustible solide - Partie 2-1: Poêles
La présente Partie 2-1 de l'EN 16510 s'applique aux poêles à combustible solide indépendants ou encastrés, sans modification fonctionnelle, utilisés avec les portes foyères soit uniquement fermées, soit fermées ou ouvertes. La présente Norme européenne s'applique uniquement aux poêles dépourvus d’alimentation mécanique.
Les appareils couverts par la présente Partie 2-1 de l'EN 16510 produisent de la chaleur dans l’espace où ils sont installés. De plus, lorsqu’ils sont équipés d’un bouilleur, ils produisent également de l’eau chaude à usage domestique et/ou du chauffage central. Ces appareils peuvent utiliser soit des combustibles minéraux solides, des briquettes de tourbe, des bûches de bois naturel ou reconstitué, soit plusieurs combustibles conformément aux instructions du fabricant de l'appareil.
La présente Partie 2-1 de l'EN 16510 ne s'applique pas aux appareils équipés d'un ventilateur pour l'alimentation en air de combustion ou aux appareils à alimentation mécanique.
Stanovanjske grelne naprave na trdna goriva - 2-1. del: Grelniki prostorov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 16510-2-1:2013
01-marec-2013
Stanovanjske grelne naprave na trdna goriva - 2-1. del: Grelniki prostorov
Residential solid fuel burning appliances - Part 2-1: Roomheaters
Häusliche Heizgeräte für feste Brennstoffe - Teil 2-1: Raumheizer
Equipement de chauffage domestique - Partie 2-1 : Poêles
Ta slovenski standard je istoveten z: prEN 16510-2-1
ICS:
97.100.30 Grelniki na trdo gorivo Solid fuel heaters
oSIST prEN 16510-2-1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 16510-2-1:2013
oSIST prEN 16510-2-1:2013
EUROPEAN STANDARD
DRAFT
prEN 16510-2-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2013
ICS 97.100.30 Will supersede EN 13240:2001
English Version
Residential solid fuel burning appliances - Part 2-1:
Roomheaters
Equipement de chauffage domestique - Partie 2-1 : Poêles Häusliche Heizgeräte für feste Brennstoffe - Teil 2-1:
Raumheizer
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 295.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16510-2-1:2013: E
worldwide for CEN national Members.
oSIST prEN 16510-2-1:2013
prEN 16510-2-1:2013 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Classification of appliances and system boundary for roomsealed appliances .4
5 Materials, design and construction .4
6 Safety requirements .4
7 Performance requirements .4
8 Appliance instructions .5
9 Assessment and verification of constancy of performance - AVCP .5
10 Marking .5
Annex A (normative) Test methods .6
Annex B (normative) Test fuels and recommended fuels.8
Annex C (informative) Installation for roomsealed appliances .9
Annex D (informative) Arrangement for measuring the leakage rate . 10
Annex E (normative) Measuring procedure for nitrogen oxides (NO ). 11
x
Annex F (normative) Measuring procedure for organic gaseous compounds (OGC) . 12
Annex G (normative) Measuring procedure for particulate matter (PM) . 13
Annex H (informative) Guideline for the characteristics to be taken into account in order to decide
on families of appliances . 14
Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU
Construction Products Directive . 15
oSIST prEN 16510-2-1:2013
prEN 16510-2-1:2013 (E)
Foreword
This document (prEN 16510-2-1:2013) has been prepared by Technical Committee CEN/TC 295 “Residential
solid fuel burning appliances”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13240:2001.
EN 13240:2001, EN 13229:2001, EN 12815:2001 and EN 12809:2001 will be totally superseded by EN 16510
series. The revision of these European Standards takes into account the comments received at their 5-year
review.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive 89/106/EEC, see informative Annex ZA, which is an integral part of this
document.
The structure of EN 16510, Residential solid fuel burning appliances, is as follows:
Part 1: General requirements and test methods;
Part 2-1: Roomheaters;
Part 2-2: Inset appliances including open fires;
Part 2-3: Cookers;
Part 2-4: Independent boilers – Nominal heat output up to 50 kW.
Principally it is possible to add further parts 2 at a later stage in order to cover other residential solid fuel
burning appliances such as pellet stoves or slow heat release appliances.
This Part 2-1 is to be used in conjunction with the latest edition of EN 16510-1 and its amendments. It was
established on the basis of prEN 16510-1:2013.
This Part 2-1 supplements or modifies the corresponding clauses in EN 16510-1, so as to convert that
publication into the European Standard: Residential solid fuel burning appliances – Requirements and test
methods for roomheaters.
When a particular subclause of Part 1 is not mentioned in this Part 2-1, that subclause applies as far as is
reasonable. When this Part 2-1 states "addition", "modification" or "replacement", the relevant text in Part 1 is
to be adapted accordingly.
NOTE The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in
a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
oSIST prEN 16510-2-1:2013
prEN 16510-2-1:2013 (E)
1 Scope
This Part 2-1 of EN 16510 is applicable to freestanding or inset roomheaters fired by solid fuel, without
functional modification that operate with fire doors either as closed only or as closed or open. This European
Standard is also only applicable to non-mechanically fired roomheaters.
The appliances covered by this Part 2-1 of EN 16510 provide heat into the space where they are installed.
Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These
appliances may burn either solid mineral fuels, peat briquettes, natural or manufactured wood logs or be multi-
fuel in accordance with the appliance manufacturer’s instructions.
This Part 2-1 of EN 16510 is not applicable to appliances with fan assisted combustion air or appliances that
are mechanically fed.
2 Normative references
prEN 16510-1:2013, Clause 2, is applicable.
3 Terms and definitions
prEN 16510-1:2013, Clause 3 is applicable.
4 Classification of appliances and system boundary for roomsealed appliances
prEN 16510-1:2013, Clause 4, is applicable.
5 Materials, design and construction
prEN 16510-1:2013, Clause 5, is applicable.
6 Safety requirements
prEN 16510-1:2013, Clause 6, is applicable.
7 Performance requirements
prEN 16510-1:2013, Clause 7, is applicable with the following modifications.
7.3 Efficiency
prEN 16510-1:2013, 7.3, is applicable with the following modification.
st
Addition after the 1 paragraph:
The manufacturer’s declared efficiency value shall be equal to or exceed 65 %.
7.6 Refuelling intervals
prEN 16510-1:2013, 7.6, is applicable with the following modification.
oSIST prEN 16510-2-1:2013
prEN 16510-2-1:2013 (E)
Replacement of Table 8:
Table 8 — Minimum refuelling intervals
Appliance type Test fuel type Minimum refuelling interval or burning rate
(as detailed in Table B.1)
Appliance with closed firedoors
At nominal heat output
Wood logs, lignite briquettes
1,5 h
Continuous burning
or peat briquettes
appliance
All other test fuels 4 h
Wood logs, lignite briquettes
40 min
Intermittent burning
or peat briquettes
appliance
All other test fuels 1 h
At slow or reduced combustion
Wood logs, lignite briquettes
3 h
Continuous burning
or peat briquettes
appliance
All other test fuels 12 h
Wood logs, lignite briquettes
no requirements
Intermittent burning
or peat briquettes
appliance
All other test fuels 10 h
8 Appliance instructions
prEN 16510-1:2013, Clause 8, is applicable.
9 Assessment and verification of constancy of performance - AVCP
prEN 16510-1:2013, Clause 9, is applicable.
10 Marking
prEN 16510-1:2013, Clause 10, is applicable.
oSIST prEN 16510-2-1:2013
prEN 16510-2-1:2013 (E)
Annex A
(normative)
Test methods
A.1 Test environment
prEN 16510-1:2013, A.1. is applicable.
A.2 Test assembly
prEN 16510-1:2013, A.2, is applicable.
A.3 Measurement equipment
prEN 16510-1:2013, A.3, is applicable.
A.4 Test procedures
prEN 16510-1:2013, A.4, is applicable with the following modification.
A.4.7 Performance test at nominal heat output
prEN 16510-1:2013, A.4.7, is applicable with the following modification.
A.4.7.1 General
prEN 16510-1:2013, A.4.7.1, is applicable with the following modification.
Replacement of Table A.2.
Table A.2 — Minimum duration and minimum number of test periods
Appliance Fuel Test period
Minimum Minimum
duration number
At nominal heat output
Continuous burning Wood, lignite briquettes, peat briquettes 1,5 h 2
Continuous burning All other solid mineral fuel 4 h 2
Intermittent burning Wood, lignite briquettes, peat briquettes 40 min 3
Intermittent burning All other solid mineral fuel 1 h 2
At slow or reduced combustion
Continuous burning Wood, lignite briquettes, peat briquettes 3 h 2
Continuous burning All other solid mineral fuel 12 h 2
Intermittent burning Wood, lignite briquettes, peat briquettes No requirement
Intermittent burning All other solid mineral fuel 10 h 2
oSIST prEN 16510-2-1:2013
prEN 16510-2-1:2013 (E)
A.5 Test results
prEN 16510-1:2013, A.5, is applicable.
A.6 Calculation methods
prEN 16510-1:2013, A.6, is applicable.
A.7 Test report
prEN 16510-1:2013, A.7, is applicable
oSIST prEN 16510-2-1:2013
prEN 16510-2-1:2013 (E)
Annex B
(normative)
Test fuels and recommended fuels
prEN 16510-1:2013, Annex B, is applicable.
oSIST prEN 16510-2-1:2013
prEN 16510-2-1:2013 (E)
Annex C
(informative)
Installation for roomsealed appliances
prEN 16510-1:2013, Annex C, is applicable.
oSIST prEN 16510-2-1:2013
prEN 16510-2-1:2013 (E)
Annex D
(informative)
Arrangement for measuring the leakage rate
prEN 16510-1:2013, Annex D, is applicable.
oSIST prEN 16510-2-1:2013
prEN 16510-2-1:2013 (E)
Annex E
(normative)
Measuring procedure for nitrogen oxides (NO )
x
prEN 16510-1:2013, Annex E, is applicable.
oSIST prEN 16510-2-1:2013
prEN 16510-2-1:2013 (E)
Annex F
(normative)
Measuring procedure for organic gaseous compounds (OGC)
prEN 16510-1:2013, Annex F, is applicable.
oSIST prEN 16510-2-1:2013
prEN 16510-2-1:2013 (E)
Annex G
(normative)
Measuring procedure for particulate matter (PM)
prEN 16510-1:2013, Annex G, is applicable.
oSIST prEN 16510-2-1:2013
prEN 16510-2-1:2013 (E)
Annex H
(informative)
Guideline for the characteristics to be taken into account
in order to decide on families of appliances
prEN 16510-1:2013, Annex H, is applicable.
oSIST prEN 16510-2-1:2013
prEN 16510-2-1:2013 (E)
Additional annex to prEN 16510-1:2013.
Addition of Annex ZA:
Annex ZA
(informative)
Clauses of this European Standard addressing the provisions
of the EU Construction Products Directive
ZA.1 Scope and relevant characteristics
This European Standard has been
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.