FprEN 1871

Road marking materials - Paint, thermoplastic and cold plastic materials - Specifications

The construction products covered and specified by this European Standard are white and yellow paint, cold plastic and thermoplastic materials, with or without premix glass beads, to be used for permanent and/or temporary road markings in circulation areas. Other products and colours intended for road markings are not covered in this European Standard.
This European Standard gives also specifications for the evaluation of conformity for white and yellow paint, cold plastic and thermoplastic materials to be used for permanent and/or temporary road markings in circulation areas including type testing and factory production control.
This European Standard also includes an Annex ZA with the clauses addressing the provisions of the EU Construction Product Directive, for permanent road markings.

Straßenmarkierungsmaterialien - Markierungsfarben, Heißplastikmassen und Kaltplastikmassen - Physikalische Eigenschaften

Die von dieser Europäischen Norm abgedeckten und festgelegten Bauprodukte sind weiße oder gelbe Markierungsfarben, Kaltplastikmassen und Heißplastikmassen mit oder ohne Premixglasperlen, die als dauerhafte und/oder vorübergehende Straßenmarkierungen auf Verkehrsflächen verwendet werden. Andere Produkte oder Farben, die für Straßenmarkierungen verwendet werden, werden in dieser Europäischen Norm nicht behandelt.
Diese Europäische Norm enthält auch Festlegungen für die Bewertung der Konformität von weißen oder gelben Markierungsfarben sowie von Kaltplastik- und Heißplastikmassen, die als dauerhafte und/oder vorübergehende Straßenmarkierungen auf Verkehrsflächen verwendet werden, einschließlich der Typprüfung und der werkseigenen Produktionskontrolle.
Diese Europäische Norm enthält auch einen Anhang ZA mit Abschnitten, die die Bestimmungen der EU-Bauproduktenrichtlinie für dauerhafte Straßenmarkierungsmaterialien betreffen.

Produits de marquage routier - Peintures, enduits à chaud et enduits à froid - Spécifications

Les produits de construction couverts et spécifiés dans la présente Norme européenne sont les peintures, les
enduits à froid et les enduits à chaud blancs et jaunes, avec ou sans microbilles de verre de prémélange,
destinés au marquage routier permanent et/ou temporaire dans les zones de circulation. Les autres produits
et couleurs destinés au marquage routier ne sont pas couverts par la présente Norme européenne.
La présente Norme européenne fournit également des spécifications pour l’évaluation de la conformité des
peintures, enduits à froid et enduits à chaud blancs et jaunes destinés au marquage routier permanent et/ou
temporaire dans les zones de circulation, y compris les essais de type et le contrôle de la production en usine.
La présente Norme européenne comprend également une Annexe ZA avec les articles concernant les
dispositions de la Directive UE Produits de Construction pour le marquage routier permanent.

Materiali za označevanje vozišča - Barve, vroča in hladna plastika - Specifikacije

General Information

• Status: Not Published
• Publication Date: 02-Oct-2011
• Withdrawal Date: 02-Apr-2012
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 226 - Road equipment
• Drafting Committee: CEN/TC 226/WG 2 - Horizontal road signs
• Current Stage: 5098 - Decision to abandon - Formal Approval
• Start Date: 10-Feb-2012
• Completion Date: 10-Feb-2012
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/111 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures
• Ref Project: kSIST FprEN 1871:2011 - Road marking materials - Paint, thermoplastic and cold plastic materials - Specifications

Relations

• Revises: EN 1871:2000 - Road marking materials - Physical properties
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Straßenmarkierungsmaterialien - Markierungsfarben, Heißplastikmassen und Kaltplastikmassen - Physikalische EigenschaftenRoad marking materials - Paint, thermoplastic and cold plastic materials - Specifications93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:FprEN 1871kSIST FprEN 1871:2011en,fr,de01-april-2011kSIST FprEN 1871:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
February 2011 ICS 93.080.20 Will supersede EN 1871:2000English Version
Road marking materials - Paint, thermoplastic and cold plastic materials - Specifications
Straßenmarkierungsmaterialien - Markierungsfarben, Heißplastikmassen und Kaltplastikmassen - Physikalische Eigenschaften This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 226.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 1871:2011: EkSIST FprEN 1871:2011

Paint and cold plastics – Test method for determining the chromaticity co-ordinates and luminance factor . 26Annex B (normative)
Paint – Test method for determining the hiding power . 27Annex C (normative)
Paint and cold plastics – Test method for determining the storage stability . 30Annex D (normative)
Paint – Test method for determining the bleed resistance . 34Annex E (normative)
Paint, cold plastics and thermoplastics – Test method for determining the alkali resistance of the materials . 36Annex F (normative)
Thermoplastics – Test method for determining the chromaticity co-ordinates and luminance factor . 39Annex G (normative)
Thermoplastics – Test method for determining the softening point . 40Annex H (normative)
Thermoplastics – Test method for determining the heat stability . 43Annex I (normative)
Thermoplastics – Test method for determining the cold impact resistance . 48Annex J (normative)
Thermoplastics – Test method for determining the indentation value . 50Annex K (normative)
Thermoplastics and cold plastics – Test method for determining the Tröger wear . 54Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 58Bibliography . 67 kSIST FprEN 1871:2011

Preformed road markings,  FprEN 1824, Road marking materials
Road trials,  FprEN 1871, Road marking materials
Physical properties,  FprEN 12802, Road marking materials
Laboratory methods and identification,  FprEN 13197, Road marking materials
Turntable wear simulators,  FprEN 13212, Road marking materials
Requirements for factory production control,  FprEN 13459, Road marking materials
Sampling and testing.
This European Standard also includes an Annex ZA with the clauses addressing the provisions of the EU Construction Product Directive, for permanent road markings. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1436:2007+A1:2008, Road marking materials  Road marking performance for road users FprEN 1824:2010, Road marking materials  Road trials FprEN 12802:2010, Road marking materials  Laboratory methods and identification FprEN 13197:2010, Road marking materials  Turntable wear simulators FprEN 13459:2010, Road marking materials  Sampling and testing EN ISO 787-11:1995, General methods of test for pigments and extenders  Part 11: Determination of tamped volume and apparent density after tamping (ISO 787-11:1981) EN ISO 1514:2004, Paints and varnishes  Standard panels for testing (ISO 1514:2004) EN ISO 2812-1:2007, Paints and varnishes  Determination of resistance to liquids  Part 1: Immersion in liquids other than water (ISO 2812-1:2007) EN ISO 4892-2:2006/A1:2009, Plastics  Methods of exposure to laboratory light sources  Part 2: Xenon-arc lamps  Amendment 1 (ISO 4892-2:2006/Amd 1:2009) EN ISO 4892-3:2006, Plastics  Methods of exposure to laboratory light sources  Part 3: Fluorescent UV lamps (ISO 4892-3:2006) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 paint liquid product which contains binders, pigments, extenders, solvents and additives, which can be supplied in single or multi-component systems and which, when applied, produces a cohesive film by the process of solvent/water evaporation and/or a chemical reaction kSIST FprEN 1871:2011

markings. Every change to these is a new assembly and it is identified with the name of the base road marking material followed by the word assembly and a correlative number (e.g. Thermo AX – Assembly 1; Thermo AX – assembly 2, etc) 3.5.1 structured road marking assembly road marking assembly without areas of regular dimensions and tap surfaces, which has flat areas of a maximum width of 75,7 mm, a maximum length of 125 mm at the top of the structure. The areas may be crossed by gaps that take up minimum 25% of the total surface area and have widths of minimum 5 mm. The areas may have ridges or edges of blocks with a height of minimum 1,2 mm 3.5.2 non structured road marking assemblies road marking assembly with areas of regular dimensions and tap surfaces, which has flat areas of a minimum width of 75,7 mm and a minimum length of 125 mm at the top of the structure. The areas can be crossed by gaps that take up maximum 75% of the total surface area and have widths of maximum 5 mm. The areas can have ridges or edges of blocks with a height of maximum 1,2 mm 4 Requirements 4.1 General This clause gives two separate lists of requirements.
1) Requirements of the base road marking materials; 2) Requirements of road marking assemblies. 4.2 Requirements of the base road marking materials (paint, thermoplastic and cold plastic) 4.2.1 Paint 4.2.1.1 Chromaticity co-ordinates and luminance factor: the colour shall be defined by (x,y) chromaticity co-ordinates and luminance factor
of the CIE standard system. When measured according to 5.2.1.1, the results of the test for the luminance factor shall comply with Table 1a). kSIST FprEN 1871:2011

When measured according to 5.2.1.1, the chromaticity co-ordinates shall lie within the regions defined by the corner points given in Table 1b). Table 1b)  Chromaticity co-ordinates of white and yellow road marking products Chromaticity co-ordinates Corner point N° 1 2 3 4 White x y 0,355 0,355 0,305 0,305 0,285 0,325 0,335 0,375 Yellow x y 0,494 0,427 0,545 0,455 0,465 0,535 0,427 0,483
4.2.1.2 Hiding power: it is the capacity of the paint to reduce the contrast between a black surface and a white surface over which the paint has been applied and dried. When measured according to 5.2.1.2, the result, expressed as the contrast ratio, shall comply with Table 2. Table 2  Classes of hiding power Colour Class Hiding Power (contrast ratio) White HP0 HP2 HP3 HP4 No value requested ≥ 90% ≥ 92% ≥ 95% Yellow HP0 HP1 HP2 No value requested ≥ 88% ≥ 90% kSIST FprEN 1871:2011

4.2.1.4 UV ageing: a film of paint is submitted to cycles of UV radiation and condensation and examined for discolouration. When tested in accordance to 5.2.1.4, the difference in luminance factor ∆β shall be as in Table 3 (where:
∆β
= original luminance factor – luminance factor after test). Table 3  Classes of difference in luminance factor after UV ageing Colour Class ∆β White and Yellow UV0 UV1 UV2 No value requested ≤ 0,05 ≤ 0,10
The chromaticity co-ordinates shall lie within the regions defined by the corner points given in Table 1b). 4.2.1.5 Bleed resistance: this test is only applicable for paint which is intended to be applied directly to asphaltic surfaces. The film of paint applied to a bituminous surface is examined for discolouration.
When tested in accordance to 5.2.1.5, the difference in luminance factor ∆β shall be as in Table 4 (where:
∆β
= original luminance factor – luminance factor after test).
Table 4  Classes of difference in luminance factor after bleed resistance test Colour Class ∆β
White and Yellow BR0 BR1 BR2 No value requested ≤ 0,03 ≤ 0,05
The chromaticity co-ordinates shall lie within the regions defined by the corner points given in Table 1b). 4.2.1.6 Alkali resist
...