EN ISO 204:2009

Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009)

ISO 204:2009 specifies the method for the uninterrupted and interrupted creep tests and defines the properties of metallic materials which can be determined from these tests, in particular the creep elongation and the time of creep rupture, at a specified temperature.
The stress rupture test is also covered, as is the testing of notched test pieces.

Metallische Werkstoffe - Einachsiger Zeitstandversuch unter Zugbeanspruchung - Prüfverfahren (ISO 204:2009)

Diese Internationale Norm legt das Prüfverfahren für den nicht unterbrochenen und den unterbrochenen
Zeitstandversuch fest und spezifiziert die Eigenschaften metallischer Werkstoffe, die mit diesen Versuchen
bestimmt werden können, besonders die Kriechdehnung und die Bruchzeit bei einer vorgeschriebenen Temperatur.
Der Zeitstandversuch wird von dieser Internationalen Norm ebenso behandelt wie die Prüfung von gekerbten
Proben.
ANMERKUNG Beim Zeitstandversuch wird während der Prüfung üblicherweise nicht die Dehnung aufgezeichnet, sondern
nur die Zeit bis zum Bruch unter einer gegebenen Last oder bis festgestellt wird, dass eine vorgeschriebene Zeit
unter einer gegebenen Last überschritten wurde.

Matériaux métalliques - Essai de fluage uniaxial en traction - Méthode d'essai (ISO 204:2009)

L'ISO 204:2009 spécifie la méthode pour les essais de fluage ininterrompu et interrompu et définit les caractéristiques des matériaux métalliques qui peuvent être déterminées à partir de ces essais, en particulier l'allongement de fluage et le temps de rupture par fluage, à une température spécifiée.
L'essai de rupture sous contrainte est également couvert, de même que les essais sur éprouvettes entaillées.

Kovinski materiali - Preskušanje nesoosnega lezenja pri nategu - Metoda preskušanja (ISO 204:2009)

Ta mednarodni standard določa metodo preskušanja neprekinjenega in prekinjenega lezenje ter opredeljuje značilnosti kovinskih materialov, ki se lahko določijo s temi preskusi, zlasti raztezek lezenja in čas lezenja do loma pri določeni temperaturi. Preskus obremenitve do loma in preskušanje zarezanega preskušanca sta prav tako zajeta v tem mednarodnem standardu.

General Information

• Status: Withdrawn
• Publication Date: 14-Jun-2009
• Withdrawal Date: 09-Oct-2018
• ICS: 77.040.10 - Mechanical testing of metals
• Technical Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Drafting Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 10-Oct-2018
• Ref Project: SIST EN ISO 204:2011 - Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009)

Relations

• Replaces: EN 10291:2000 - Metallic materials - Uniaxial creep testing in tension - Method of test
• Effective Date: 20-Jun-2009
• Replaced By: EN ISO 204:2018 - Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2018)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 204:2011
01-julij-2011
1DGRPHãþD
SIST EN 10291:2002
Kovinski materiali - Preskušanje nesoosnega lezenja pri nategu - Metoda
preskušanja (ISO 204:2009)
Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009)
Metallische Werkstoffe - Einachsiger Zeitstandversuch unter Zugbeanspruchung -
Prüfverfahren (ISO :2009)
Matériaux métalliques - Essai de fluage uniaxial en traction - Méthode d'essai (ISO
204:2009)
Ta slovenski standard je istoveten z: EN ISO 204:2009
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN ISO 204:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 204:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 204:2011
EUROPEAN STANDARD
EN ISO 204
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2009
ICS 77.040.10 Supersedes EN 10291:2000
English Version
Metallic materials - Uniaxial creep testing in tension - Method of
test (ISO 204:2009)
Matériaux métalliques - Essai de fluage uniaxial en traction Metallische Werkstoffe - Einachsiger Zeitstandversuch
- Méthode d'essai (ISO 204:2009) unter Zugbeanspruchung - Prüfverfahren (ISO 204:2009)
This European Standard was approved by CEN on 27 May 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 204:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 204:2011
EN ISO 204:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 204:2011
EN ISO 204:2009 (E)
Foreword
This document (EN ISO 204:2009) has been prepared by Technical Committee ISO/TC 164 "Mechanical
testing of metals" in collaboration with Technical Committee ECISS/TC 1 “Steel - Mechanical testing” the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2009, and conflicting national standards shall be withdrawn
at the latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 10291:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 204:2009 has been approved by CEN as a EN ISO 204:2009 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 204:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 204:2011

INTERNATIONAL ISO
STANDARD 204
Second edition
2009-06-15


Metallic materials — Uniaxial creep
testing in tension — Method of test
Matériaux métalliques — Essai de fluage uniaxial en traction —
Méthode d'essai




Reference number
ISO 204:2009(E)
©
ISO 2009

---------------------- Page: 7 ----------------------

SIST EN ISO 204:2011
ISO 204:2009(E)
PDF disclaimer
This PDF file may contain embedded typefa
...