EN 14795:2005

LPG equipment and accessories - Transportable refillable aluminium cylinders for Liquefied Petroleum Gas (LPG) - Periodic inspection

This European Standard specifies inspection intervals, procedures for periodic inspection and testing, for transportable refillable welded aluminium LPG cylinders of water capacity from 0,5 l up to and including 150 l. (see EN 13110).
This standard does not apply to cylinders permanently installed in vehicles, or to plant and filling equipment.

Flüssiggas-Geräte und Ausrüstungsteile - Ortsbewegliche, wiederbefüllbare Flaschen aus Aluminium für Flüssiggas (LPG) - Wiederkehrende Prüfung

Diese Europäische Norm legt Zeiträume und Verfahren für die wiederkehrende Prüfung und Prüfung für ortsveränderliche und wiederbefüllbare geschweißte Flüssiggasflaschen aus Aluminium mit einem Fassungsvermögen von 0,5 l bis einschließlich 150 l fest, (siehe EN 13110).
Diese Norm gilt nicht für Flaschen, die dauerhaft in Fahrzeugen, Anlagen und Fülleinrichtungen eingebaut sind.

Équipements pour gaz de pétrole liquéfié et leurs accessoires - Bouteilles transportables et rechargeables en aluminium pour gaz de pétrole liquéfié (GPL) - Inspection périodique

La présente Norme européenne indique la fréquence des inspections, les modes opératoires à mettre en oeuvre pour les inspections périodiques et les essais des bouteilles transportables et rechargeables en aluminium soudé pour GPL, d’une capacité en eau de 0,5 l à 150 l inclus. (Voir EN 13110).
La présente norme ne s’applique ni aux bouteilles installées à demeure dans des véhicules, ni aux équipements d’installations et de remplissage.

Oprema in pribor za utekočinjeni naftni plin (UNP) - Premične, ponovno polnljive aluminijeve jeklenke za UNP - Periodični pregledi

General Information

• Status: Withdrawn
• Publication Date: 22-Nov-2005
• Withdrawal Date: 26-Feb-2008
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• ICS: 23.020.35 - Gas cylinders
• Technical Committee: CEN/TC 286 - Liquefied petroleum gas equipment and accessories
• Drafting Committee: CEN/TC 286/WG 7 - Operational requirements - Transportable LPG cylinders and static LPG tanks
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 27-Feb-2008
• Completion Date: 27-Feb-2008
• Directive: 94/55/EC - Transport of dangerous goods by road
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN 14795:2006 - LPG equipment and accessories - Transportable refillable aluminium cylinders for Liquefied Petroleum Gas (LPG) - Periodic inspection

Relations

• Replaced By: EN 1440:2008 - LPG equipment and accessories - Periodic inspection of transportable refillable LPG cylinders
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LPG equipment and accessories - Transportable refillable aluminium cylinders for Liquefied Petroleum Gas (LPG) - Periodic inspectionÉquipements pour gaz de pétrole liquéfié et leurs accessoires - Bouteilles transportables et rechargeables en aluminium pour gaz de pétrole liquéfié (GPL) - Inspection périodiqueFlüssiggas-Geräte und Ausrüstungsteile - Ortsbewegliche, wiederbefüllbare Flaschen aus Aluminium für Flüssiggas (LPG) - Wiederkehrende PrüfungTa slovenski standard je istoveten z:EN 14795:2005SIST EN 14795:2006en23.020.30ICS:SLOVENSKI
STANDARDSIST EN 14795:200601-marec-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14795November 2005ICS 23.020.30 English VersionLPG equipment and accessories - Transportable refillablealuminium cylinders for Liquefied Petroleum Gas (LPG) -Periodic inspectionÉquipements pour gaz de pétrole liquéfié et leursaccessoires - Bouteilles transportables et rechargeables enaluminium pour gaz de pétrole liquéfié (GPL) - InspectionpériodiqueFlüssiggas-Geräte und Ausrüstungsteile - Ortsbewegliche,wiederbefüllbare Flaschen aus Aluminium für Flüssiggas(LPG) - Wiederkehrende PrüfungThis European Standard was approved by CEN on 7 October 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14795:2005: E



EN 14795:2005 (E) 2 Contents page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Intervals between periodic inspection.6 5 Procedures for periodic inspection.6 5.1 General.6 5.2 External visual inspection.6 5.2.1 Preparation for external visual inspection.6 5.2.2 Inspection procedure.6 5.2.3 Visible defects.7 5.3 Internal visual inspection.9 5.3.1 General.9 5.3.2 Preparation of cylinders.9 5.3.3 Procedure.9 5.4 A
...