prEN 10369-1
(Main)Prestressing steels - Protected and sheathed strands for prestressing - Part 1: General requirements
Prestressing steels - Protected and sheathed strands for prestressing - Part 1: General requirements
This document specifies the requirements for uncoated high strength steel strands or zinc or zinc alloy coated high strength steel strands, encapsulated with a protection product and a sheath 1).
The intended use of these products is mainly the prestressing of concrete.
NOTE These products can also be used in other stress applications in the construction field (e.g. stay cables for bridges) where the protection of the products is not removed in use.
The standard applies only to products as supplied by the producer.
1) The word "sheath" used in the present document does not cover the sheaths as stated in mandate M/115 and specified in EN 523.
Spannstähle - Geschützte und gehüllte Litzen für Vorspannen - Teil 1: Allgemeine Anforderungen
Dieses Dokument legt die allgemeinen Anforderungen für unbeschichtete hochfeste Stahllitzen oder zink- oder zinklegierungsbeschichtete hochfeste Stahllitzen fest, die mit einem Schutzprodukt und Hülle ummantelt sind1).
Die beabsichtigte Verwendung dieser Produkte ist hauptsächlich die Vorspannung von Beton.
ANMERKUNG Diese Erzeugnisse dürfen auch bei anderen Anwendungen mit Beanspruchungen im Baubereich (z. B. Schrägseile für Brücken), bei denen der Schutz der Produkte bei der Verwendung nicht beseitigt wird.
Die Norm gilt nur für Produkte, welche vom Hersteller geliefert werden.
1) Das Wort "Hülle", das in der vorliegenden Norm verwendet wird, deckt nicht die Hüllen ab, wie in Mandat M/115 angegeben und in EN 523 spezifiziert.
Armatures de précontrainte - Torons protégés gainés pour précontrainte - Partie 1 : Prescriptions générales
Le présent document spécifie les prescriptions applicables aux torons en acier à haute résistance non revêtus ou aux torons en acier à haute résistance revêtus de zinc ou d’un alliage de zinc, enrobés d’un produit de protection et d’une gaine ).
L’usage prévu pour ces produits est principalement la précontrainte du béton.
NOTE Ces produits peuvent également être utilisés dans d’autres applications sous contrainte dans le domaine de la construction (haubans de ponts, par exemple) pour lesquelles la protection des produits n'est pas retirée lors de l’utilisation.
La norme s’applique uniquement aux produits tels qu’ils sont fournis par le producteur.
1) Le mot « gaine » utilisé dans le présent document ne couvre pas les gaines telles qu’elles ont été définies dans le Mandat M / 115 et spécifiées dans l’EN 523.
Prednapeta jekla - Zaščitena in obložena vlakna za prednapenjanje - 1. del: Splošno
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2019
Prednapeta jekla - Zaščitena in obložena vlakna za prednapenjanje - 1. del:
Splošno
Prestressing steels - Protected and sheathed strands for prestressing - Part 1: General
Spannstähle - Geschützte und gehüllte Litze zum Vorspannen - Teil 1: Allgemeine
Anforderungen
Aciers de précontrainte - Fils protégés et gainés de précontrainte - Partie 1 : Généralités
Ta slovenski standard je istoveten z: prEN 10369-1
ICS:
77.080.20 Jekla Steels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2019
ICS 77.140.15
English Version
Prestressing steels - Protected and sheathed strands for
prestressing - Part 1: General requirements
Armatures de précontrainte - Torons protégés gainés Spannstähle - Geschützte und gehüllte Litzen für
pour précontrainte - Partie 1 : Prescriptions générales Vorspannen - Teil 1: Allgemeine Anforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 459/SC 4.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10369-1:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Symbols . 7
5 Classification and designation . 8
5.1 Classification . 8
5.2 Designation. 8
6 Information to be obtained by the manufacturer . 8
7 Requirements . 9
7.1 General . 9
7.2 Requirements for the protected and sheathed strands . 9
8 Assessment and verification of the constancy of performance (AVCP) . 12
8.1 General . 12
8.2 Type testing . 12
8.3 Factory production control (FPC) . 15
8.4 Evaluation, reporting and action . 20
9 Test methods . 20
10 Delivery conditions . 20
10.1 Conditioning . 20
10.2 Transportation and storage . 21
10.3 Labelling . 21
10.4 Documents accompanying the delivery . 21
Annex A (normative) Requirements for greases and waxes used as protection material for
protected and sheathed strands . 22
A.1 Grease . 22
A.2 Wax . 23
Annex B (normative) Requirements for material used for the manufacture of the sheath of
protected and sheathed strands . 24
B.1 Base material, ready for use mixture (granules), black sheath . 24
B.2 Base material, ready for use mixture (granules), sheath other than black . 24
Annex C (normative) Testing procedures . 25
C.1 Determination of the mass per unit length of the protection product . 25
C.2 Determination of the thickness of the sheath . 26
C.3 Test of initial resistance to friction of the sheath . 26
C.3.1 General . 26
C.3.2 Test method applicable to sliding protected and sheathed strands (type S) . 26
C.3.3 Test method applicable to adherent protected and sheathed strands (type A) . 26
C.4 Test of bond retention under thermal variations . 27
C.5 Water tightness test . 28
C.5.1 Static test . 28
C.5.2 Dynamic test . 28
C.6 Impact resistance of the sheath . 29
Annex ZA (informative) Relationship between this European Standard and the
requirements of Regulation (EU) No. 305/2011 aimed to be covered . 32
ZA.1 Scope and relevant characteristics . 32
ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 33
ZA.3 Assignment of AVCP tasks . 34
Bibliography . 35
European foreword
This document (prEN 10369-1:2019) has been prepared by Technical Committee CEN/TC 459/SC 4
“Concrete reinforcing and prestressing steels”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a standardization request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of
EU Construction Products Regulation (EU 305/2011).
For relationship with EU EU Construction Products Regulation (EU 305/2011), see informative
Annex ZA, which is an integral part of this document.
prEN 10369 consists of three parts under the general title “Prestressing steels — Protected and
sheathed strands for prestressing”:
— Part 1: General requirements
— Part 2: Sliding strands
— Part 3: Adherent strands
Whenever approved, the publication of this series of standards will wait until EN 10138-1 and
EN 10138-3 and EN 10337 are approved.
1 Scope
This document specifies the requirements for uncoated high strength steel strands or zinc or zinc alloy
1)
coated high strength steel strands, encapsulated with a protection product and a sheath .
The intended use of these products is mainly the prestressing of concrete.
NOTE These products can also be used in other stress applications in the construction field (e.g. stay cables
for bridges) where the protection of the products is not removed in use.
The standard applies only to products as supplied by the producer.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 728, Plastics piping and ducting systems — Polyolefin pipes and fittings — Determination of oxidation
induction time
EN 10020, Definition and classification of grades of steel
prEN 10138-1, Prestressing steels — Part 1: General requirements
prEN 10138-3, Prestressing steels — Part 3: Strand
EN 10204, Metallic products — Types of inspection documents
prEN 10337, Zinc and zinc alloy coated prestressing steel wires and strands
prEN 10369-2, Prestressing steels — Protected and sheathed strands for prestressing — Part 2: Sliding
strands
prEN 10369-3, Prestressing steels — Protected and sheathed strands for prestressing — Protected and
sheathed high strength steel strands — Part 3: Adherent strands
EN ISO 175, Plastics — Methods of test for the determination of the effects of immersion in liquid
chemicals (ISO 175:2010)
EN ISO 527-1, Plastics — Determination of tensile properties — Part 1: General principles (ISO 527-1)
EN ISO 527-2, Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and
extrusion plastics (ISO 527-2)
EN ISO 4892-2, Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
(ISO 4892-2)
EN ISO 9227, Corrosion tests in artificial atmospheres — Salt spray tests (ISO 9227)
1)
The word "sheath" used in the present document does not cover the sheaths as stated in mandate M/115 and
specified in EN 523.
EN ISO 10304-1, Water quality — Determination of dissolved anions by liquid chromatography of ions —
Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1)
EN ISO 10304-4, Water quality — Determination of dissolved anions by liquid chromatography of ions —
Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4)
EN ISO 15630-3, Steel for the reinforcement and prestressing of concrete — Test methods — Part 3:
Prestressing steel (ISO 15630-3)
ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion
method, liquid pyknometer method and titration method
ISO 2137, Petroleum products and lubricants — Determination of cone penetration of lubricating greases
and petrolatum
I
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.