EN 6049-001:2015

Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification

This European Standard specifies the general characteristics, qualification and acceptance requirements for protection sleeves in meta-aramid fibres for cable and cable bundles for aerospace application.

Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-Aramidfasern - Teil 001: Technische Lieferbedingungen

Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 001: Spécification technique

Aeronavtika - Električni kabli, namestitev - Zaščitna obojka iz meta-aramidnih vlaken - 001. del: Tehnična specifikacija

Ta evropski standard določa splošne značilnosti ter zahteve glede kvalifikacije in sprejemljivosti za zaščitne obojke iz meta-aramidnih vlaken za kable in snope kablov, ki se uporabljajo v aeronavtiki.

General Information

• Status: Withdrawn
• Publication Date: 26-May-2015
• Withdrawal Date: 28-Aug-2018
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 29-Aug-2018
• Ref Project: SIST EN 6049-001:2015 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification

Relations

• Replaced By: EN 6049-001:2018 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification
• Effective Date: 13-Sep-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HWDDUDPLGQLKLuft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-Aramidfasern - Teil 001: Technische LieferbedingungenSérie aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 001: Spécification techniqueAerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 6049-001:2015SIST EN 6049-001:2015en,fr,de01-september-2015SIST EN 6049-001:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 6049-001
May 2015 ICS 49.060 English Version
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 001: Spécification technique
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-Aramidfasern - Teil 001: Technische Lieferbedingungen This European Standard was approved by CEN on 28 June 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 6049-001:2015 ESIST EN 6049-001:2015

1) Published as ASD-STAN Prestandard at the date of publication of this standard. www.asd-stan.org SIST EN 6049-001:2015

EN 6059-2011), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 201: Visual examination
EN 6059-2021), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 202: Dimensions and mass
EN 6059-2031), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 203: Coverage
EN 6059-3011), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 301: Sun light exposure
EN 6059-3021), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 302: High temperature exposure
EN 6059-3031), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 303: Resistance to fluids
EN 6059-3051), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 305: Fluid absorption
EN 6059-3061), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 306: Mould growth
EN 6059-3081), Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 308: Rapid change of temperature EN 6059-309, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 309: Fire resistance 2) EN 6059-4011), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 401: Expansion range
EN 6059-4021), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 402: Bending properties
EN 6059-4031), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 403: Scrape abrasion
EN 6059-4041), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 404: Tensile strength
EN 6059-4051), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 405: Dynamic cut-through
EN 6059-4061), Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 406: Vibration
2) In preparation at the date of publication of this standard. SIST EN 6049-001:2015

Braiding pattern Key 1 Pitch 2 1 tow Figure 1 — Braided tubular sleeve, highly expandable, tows of multifilament fibres, providing ease of installation and excellent hold once positioned
...