iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 197-2:2000

(Main)

Cement - Part 2: Conformity evaluation

Cement - Part 2: Conformity evaluation

This Part of this European Standard specifies the scheme for the evaluation of conformity of cements to their corresponding product specification standards, including certification of conformity by a certification body. The standard provides technical rules for factory production control by the manufacturer, including autocontrol testing of samples, and for the tasks of the certification body. It also provides rules for actions to be followed in the event of non-conformit y, the procedure for the certification of conformity and requirements for dispatching centres.

Zement - Teil 2: Konformitätsbewertung

Dieser Teil von prEN 197:1999 beschreibt das Verfahren für die Konformitätsbewertung mit den entsprechenden Produktnormen, einschließlich der Zertifizierung der Konformität durch eine Zertifizierungsstelle. Diese Europäische Norm enthält technische Regeln für die werkseigene Produktionskontrolle durch den Hersteller, einschließlich der internen Überwachungsprüfungen von Proben, und für die Aufgaben der Zertifizierungsstelle.

Ciment - Partie 2: Evaluation de la conformité

La présente partie du prEN 197:1999 décrit le système d'évaluation de conformité des ciments aux normes de spécifications de produit correspondantes qui inclut une certification de conformité par un organisme de certification. La norme fournit des régles techniques applicables au contrôle de la production en usine effectué par le fabricant, y compris aux essais d'autocontrôle sur des échantillons, et aux tâches incombant à l'organisme de certification. Elle établit également des régles à suivre en cas de non-conformité, la procédure de certification de conformité et les exigences applicables aux centres de distribution.

Cement - 2. del: Ovrednotenje skladnosti

General Information

Status
Withdrawn
Publication Date
20-Jun-2000
Withdrawal Date
21-Jan-2014
ICS
91.100.10 - Cement. Gypsum. Lime. Mortar
Technical Committee
CEN/TC 51 - Cement and building limes
Drafting Committee
CEN/TC 51/WG 13 - Assessment of conformity
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
22-Jan-2014
Completion Date
22-Jan-2014
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/114 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on cements, buliding limes, and other hydr. binders
Ref Project
SIST EN 197-2:2001 - Cement - Part 2: Conformity evaluation

Relations

Replaces
ENV 197-2:1995 - Cement - Part 2: Conformity evaluation
Effective Date
22-Dec-2008
Replaced By
EN 197-2:2014 - Cement - Part 2: Conformity evaluation
Effective Date
06-Aug-2011

Buy Standard

EN 197-2:2001EN 197-2:2001
PreviousNext
Standard
EN 197-2:2001
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN 197-2:2002EN 197-2:2002
PreviousNext
Standard – translation
EN 197-2:2002
Slovenian language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cement - 2. del: Ovrednotenje skladnostiZement - Teil 2: KonformitätsbewertungCiment - Partie 2: Evaluation de la conformitéCement - Part 2: Conformity evaluation91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:EN 197-2:2000SIST EN 197-2:2001sl01-februar-2001SIST EN 197-2:2001SLOVENSKI
STANDARDSIST ENV 197-2:20001DGRPHãþD



SIST EN 197-2:2001



SIST EN 197-2:2001



SIST EN 197-2:200
...

SLOVENSKI SIST EN 197-2
prva izdaja
STANDARD
april 2002











Cement – 2. del: Ovrednotenje skladnosti (istoveten z EN 197-2:2000)

Cement - Part 2: Conformity evaluation

Ciment - Partie 2: Evaluation de la conformité

Zement - Teil 2: Konformitätsbewertung






















Deskriptorji: cementi, sestava, lastnost, mehanske lastnosti, fizikalne lastnosti, kemične
lastnosti, zahteve


Referenčna številka
ICS 91.100.10 SIST EN 197-2:2002 (sl)


Nadaljevanje na strani II in od 1 do 21

---------------------- Page: 1 ----------------------

SIST EN 197-2 : 2002
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega standarda ni dovoljeno.
II

---------------------- Page: 2 ----------------------

SIST EN 197-2 : 2002
NACIONALNI UVOD
Standard SIST EN 197-2 (sl), Cement – 2. del: Ovrednotenje skladnosti, prva izdaja, 2002, ima status
slovenskega standarda in je istoveten evropskemu standardu EN 197-2 (en), Cement - Part 2:
Conformity evaluation, 2000.
NACIONALNI PREDGOVOR
Evropski standard EN 197-2:2000 je pripravil tehnični odbor Evropskega komiteja za standardizacijo
CEN/TC 51, Cement in gradbeno apno.
Slovenski standard SIST EN 197-2:2002 je prevod evropskega standarda EN 197-2:2000. V primeru
spora glede besedila slovenskega prevoda v tem standardu je odločilen izvirni evropski standard v
angleškem jeziku. Slovensko izdajo standarda je pripravila delovna skupina SIST/TC CAA/WG 1
Cement, potrdil pa tehnični odbor SIST/TC CAA Mineralna veziva in zidarstvo.
Ta slovenski standard je dne 2002-03-27 odobrila direktorica SIST.
ZVEZE S STANDARDI
S prevzemom tega evropskega standarda veljajo za omejeni namen referenčnih standardov vsi
standardi, navedeni v izvirniku.
PREDHODNA IZDAJA
SIST ENV 197-2:2000 (sl) Cement - 2. del: Ovrednotenje skladnosti
OPOMBE
- Povsod, kjer se v besedilu standarda uporablja izraz “evropski standard”, v
SIST EN 197-2:2002 to pomeni “slovenski standard”.
- Nacionalni uvod in nacionalni predgovor nista sestavni del standarda.
- Ta nacionalni dokument je istoveten z EN 197-2:2000 in je objavljen z dovoljenjem
CEN
Rue de Stassart 36
1050 Bruselj
Belgija

- This national document is identical with EN 197-2:2000 and is published with the permission of

CEN
Rue de Stassart 36
1050 Bruxelles
Belgium



III

---------------------- Page: 3 ----------------------

EVROPSKI STANDARD EN 197-2
EUROPEAN STANDARD
NORME EUROPÉENE
EUROPÄISCHE NORM junij 2000
ICS 91.100.10 Nadomešča ENV 197-2:1995


Cement - 2. del: Ovrednotenje skladnosti

Cement - Part 2:  Ciment - Partie 2:  Zement - Teil 2:
Conformity evaluation Evaluation de la conformité Konformitätsbewertung


Ta evropski standard je 26. maja 2000 odobril CEN.
Člani CEN morajo ravnati v skladu s poslovnikom CEN/CENELEC, ki določa pogoje, pod katerimi dobi
ta standard status nacionalnega standarda brez kakršnih koli sprememb. Sezname najnovejših izdaj
teh nacionalnih standardov in njihove bibliografske podatke je možno dobiti na zahtevo pri Centralnem
sekretariatu ali članih CEN.
Ta evropski standard obstaja v treh uradnih izdajah (angleški, francoski, nemški). Izdaje v drugih
jezikih, ki jih člani CEN na lastno odgovornost prevedejo in izdajo ter prijavijo pri Centralnem
sekretariatu, veljajo kot uradne izdaje.
Člani CEN so nacionalni organi za standarde Avstrije, Belgije, Češke republike, Danske, Finske,
Francije, Grčije, Irske, Islandije, Italije, Luksemburga, Nemčije, Nizozemske, Norveške, Portugalske,
Španije, Švedske, Švice in Združenega kraljestva.





CEN
Evropski komite za standardizacijo
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung

Centralni sekretariat: Rue de Stassart 36, B-1050 Bruselj
Ref. št. EN 197-2:2000 E

---------------------- Page: 4 ----------------------

SIST EN 197-2 : 2002
VSEBINA Stran
Predgovor .3
1 Obseg in področje uporabe.3
2 Zveze s standardi .3
3 Definicije .3
3.1 Posebne definicije .3
3.2 Splošne definicije.4
4
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 13933:2023(Main)
Masonry cement - Testing for workability (cohesivity)
SIST-TP CEN/TR 13933:2024

This document deals with the adaption of existing test methods and equipment to provide a repeatable and reproducible means of assessing the workability ("cohesivity") imparted to mortar by masonry cements.

  • Technical report
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 197-6:2023(Main)
Cement - Part 6: Cement with recycled building materials
SIST EN 197-6:2023

This document specifies cement with recycled concrete fines whose intended use is the preparation of concrete, mortar, grout, etc.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16908:2017+A1:2022(Main)
Cement and building lime - Environmental product declarations - Product category rules complementary to EN 15804
SIST EN 16908:2017+A1:2022

The general scope of the core product category rules (PCR) is given in EN 15804:2012+A2:2019, Clause 1.
This PCR is primarily intended for the creation of cradle-to-gate EPDs of cement and building lime.
In other respects, the scope is as in EN 15804:2012+A2:2019.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 459-2:2021(Main)
Building lime - Part 2: Test methods
SIST EN 459-2:2021

This document specifies the test methods for all building limes covered by EN 459 1. They can also be applied to other lime materials, the standards for which call up these methods.
This document specifies in Table 2 the methods used for the chemical analyses and the determination of physical properties of building limes.
This document specifies the reference methods and, in certain cases, an alternative method which can be considered to be equivalent. In the case of a dispute, only the reference methods are used.
Any other methods may be used provided they are calibrated, either against the reference methods or against internationally accepted reference materials, in order to demonstrate their equivalence.

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 197-5:2021(Main)
Cement - Part 5: Portland-composite cement CEM II/C-M and Composite cement CEM VI
SIST EN 197-5:2021

This document deals with Portland-composite cement CEM II/C-M, not covered by EN 197-1, and a different type of Composite cement CEM VI, also not covered by EN 197-1, whose intended use is the preparation of concrete, mortar, grout etc.
This document does not cover:
- common cement covered by EN 197-1;
- very low heat special cement covered by EN 14216;
- supersulfated cement covered by EN 15743;
- calcium aluminate cement covered by EN 14647;
- masonry cement covered by EN 413-1.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 197-2:2020(Main)
Cement - Part 2: Assessment and verification of constancy of performance
SIST EN 197-2:2020

This document specifies the scheme for the assessment and verification of constancy of performance (AVCP) of cements, including certification of constancy of performance.
The document provides technical rules for factory production control, further testing of samples taken at the manufacturing plant (autocontrol testing) and assessment of the performance of the cement, initial inspection of the manufacturing plant and of factory production control, continuing surveillance, assessment and evaluation of factory production control and audit-testing of samples. It also provides rules for actions to be followed in the event of non-conformity and requirements for depots.
In this document, the word "cement" is used to refer both to common cements as defined in EN 197 1 and to other cements and binders for which the relevant product specification standard makes reference to this document and which are submitted for certification. Such a cement is produced at a given factory and belongs to a particular type and a particular strength class, as defined and specified in the relevant product specification standard.
The guidelines given in the Technical Report CEN/TR 14245 [1] contain information for the application of this document.
This document is linked with the Annexes ZA of European Standards covering cements and binders, i.e. EN 197 1, EN 14216, EN 14647, EN 413 1 and EN 15743.
NOTE   The reason for having drafted this separate document is that the provisions it includes are applicable to different products covered by different European Standards.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 14245:2020(Main)
Cement - Guidelines for the application of EN 197-2: Assessment and verification of constancy of performance
SIST-TP CEN/TR 14245:2020

This document specifies the scheme for the assessment and verification of constancy of performance (AVCP) of cements, including certification of constancy of performance.
The document provides technical rules for factory production control, further testing of samples taken at the manufacturing plant (autocontrol testing) and assessment of the performance of the cement, initial inspection of the manufacturing plant and of factory production control, continuing surveillance, assessment and evaluation of factory production control and audit-testing of samples. It also provides rules for actions to be followed in the event of non-conformity and requirements for depots.
In this document, the word “cement” is used to refer both to common cements as defined in EN 197 1 and to other cements and binders for which the relevant product specification standard makes reference to this document and which are submitted for certification. Such a cement is produced at a given factory and belongs to a particular type and a particular strength class, as defined and specified in the relevant product specification standard.
The guidelines given in the Technical Report CEN/TR 14245 contain information for the application of this document.
This document is linked with Annexes ZA of European Standards covering cements and binders, i.e. EN 197 1, EN 14216, EN 14647, EN 413 1 and EN 15743.
NOTE   The reason for having drafted this separate document is that the provisions it includes are applicable to different products covered by different European Standards.
Guidance
EN 197 2 deals with the assessment and verification of constancy of performance (AVCP) of cements and binders that are submitted for certification. It deals in particular with cases where “further testing” of the product is undertaken, as is the case for attestation system 1+ under the Construction Products Regulation. The products for which EN 197 2 is applicable are: the common cement products and the low heat cements and the sulfate resisting cements, refer to EN 197 1, the very low heat special cements, refer to EN 14216, the supersulfated cements, refer to EN 15743, the calcium aluminate cements, refer to EN 14647, and the masonry cements, refer to EN 413 1.

  • Technical report
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17365:2019(Main)
Method for the determination of C3A in the clinker from cement analysis
SIST-TP CEN/TR 17365:2019

This document describes the analytical procedures used to determine the content of C3A in the clinker starting from a chemical analysis on cement. The method can be applied to CEM type I and IV for the determination of the requirement of C3A, as defined on EN 197 1.
This document describes two methods, traditional wet and XRF analysis (EN 196 2), which can be considered to be equivalent, in the scope of this CEN/TR 17365, for the determination of Al2O3, Fe2O3 and SO3.
The same methods are described in EN 196 2, but for the scope of this document, the X-ray fluorescence (XRF) is the preferred method to be used for the determination of Al2O3, Fe2O3 and SO3.

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 196-11:2018(Main)
Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method
SIST EN 196-11:2019

This document specifies the apparatus and procedure for determining the heat of hydration of cements and other hydraulic binders at different test ages by isothermal conduction calorimetry.
This test procedure is intended for measuring the heat of hydration of cement up to 7 days in order to obtain correspondence between Isothermal Conduction Calorimetry (ICC) and EN 196 8 and EN 196 9. Nevertheless this test duration may be critical for some apparatus, even if they can work properly at shorter test ages.
Contrary to EN 196 8 this method gives the heat of hydration continuously over the time. Additionally, the heat flow versus time is given.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 196-6:2018(Main)
Methods of testing cement - Part 6: Determination of fineness
SIST EN 196-6:2019

This European Standard describes three methods of determining the fineness of cement.
The sieving method serves only to demonstrate the presence of coarse cement particles. This method is primarily suited to checking and controlling the production process.
The air-jet sieving method measures the retention on sieving and is suitable for particles which substantially pass a 2,0 mm test sieve. It may be used to determine the particle size distribution of agglomerates of very fine particles. This method may be used with test sieves in a range of aperture sizes, e.g. 63 μm and 90 μm.
The air permeability method (Blaine) measures the specific surface area (mass related surface area) by comparison with a reference material sample. The determination of the specific surface area serves primarily to check the consistency of the grinding process of one and the same plant. This method only enables a limited assessment of the properties of the cement in use.
NOTE   The air permeability method may not give significant results for cements containing ultrafine materials.
The methods are applicable to all the cements defined in EN 197.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day