EN ISO 16432:2007

Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) (ISO 16432:2006)

ISO 16432:2006 specifies requirements for embossed-resistance-projection welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel comprising two thicknesses of metal, where the maximum single sheet thickness of components to be welded is within the range 0,4 mm to 3 mm for the following materials:
uncoated steels;hot-dip zinc or iron-zinc alloy (galvannealed) coated steel;electrolytic zinc, zinc-iron, or zinc-nickel coated steel;aluminium coated steel;zinc-aluminium coated steel.
Organic coated or primer coated steels are not covered by ISO 16432:2006.

Widerstandsschweißen - Verfahren zum Buckelschweißen von niedriglegierten Stählen mit oder ohne metallischem Überzug (ISO 16432:2006)

Soudage par résistance - Mode opératoire de soudage par bossage(s) embouti(s) des aciers à bas carbone revêtus et non revêtus (ISO 16432:2006)

L'ISO 16432:2006 spécifie les exigences relatives au soudage par bossage embouti pour la fabrication d'assemblages en acier à bas carbone revêtu ou non revêtu avec deux épaisseurs de métal, l'épaisseur maximale d'une tôle simple constituant les pièces à souder étant comprise entre 0,4 mm et 3 mm pour les matériaux suivants:
aciers non revêtus;acier galvanisé à chaud ou revêtu d'un alliage de fer-zinc (recuit par galvanisation);acier avec revêtement électrolytique de zinc, zinc-fer ou zinc-nickel;acier revêtu d'aluminium;acier revêtu de zinc-aluminium.
Les aciers revêtus de matières organiques ou de peinture primaire ne relèvent pas de l'ISO 16432:2006.

Uporovno varjenje - Postopek bradavičnega varjenja neprevlečenih in prevlečenih maloogljičnih jekel z uporabo vtisnjenih bradavic (ISO 16432:2006)

General Information

• Status: Published
• Publication Date: 19-Jun-2007
• Withdrawal Date: 30-Dec-2007
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121 - Welding
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 20-Jun-2007
• Due Date: 26-May-2008
• Completion Date: 20-Jun-2007
• Ref Project: SIST EN ISO 16432:2007 - Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) (ISO 16432:2006)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16432:2007
01-september-2007
8SRURYQRYDUMHQMH3RVWRSHNEUDGDYLþQHJDYDUMHQMDQHSUHYOHþHQLKLQSUHYOHþHQLK
PDORRJOMLþQLKMHNHO]XSRUDERYWLVQMHQLKEUDGDYLF,62
Resistance welding - Procedure for projection welding of uncoated and coated low
carbon steels using embossed projection(s) (ISO 16432:2006)
Widerstandsschweißen - Verfahren zum Buckelschweißen von niedriglegierten Stählen
mit oder ohne metallischem Überzug (ISO 16432:2006)
Soudage par résistance - Mode opératoire de soudage par bossage(s) embouti(s) des
aciers a bas carbone revetus et non revetus (ISO 16432:2006)
Ta slovenski standard je istoveten z: EN ISO 16432:2007
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 16432:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 16432
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2007
ICS 25.160.10

English Version
Resistance welding - Procedure for projection welding of
uncoated and coated low carbon steels using embossed
projection(s) (ISO 16432:2006)
Soudage par résistance - Mode opératoire de soudage par Widerstandsschweißen - Verfahren zum Buckelschweißen
bossage(s) embouti(s) des aciers à bas carbone revêtus et von niedriglegierten Stählen mit oder ohne metallischem
non revêtus (ISO 16432:2006) Überzug (ISO 16432:2006)
This European Standard was approved by CEN on 19 May 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16432:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 16432:2007 (E)
Foreword
The text of ISO 16432:2006 has been prepared by IIW, International Institute of Welding, and has been taken
over as EN ISO 16432:2007 by Technical Committee CEN/TC 121 “Welding” the secretariat of which is held
by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2007, and conflicting national standards shall be withdrawn
at the latest by December 2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 16432:2006 has been approved by CEN as a EN ISO 16432:2007 without any modification.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 16432
First edition
2006-02-01

Resistance welding — Procedure for
projection welding of uncoated and
coated low carbon steels using
embossed projection(s)
Soudage par résistance — Procédure pour le soudage par bossage(s)
embouti(s) des aciers à bas carbone revêtus et non revêtus




Reference number
ISO 16432:2006(E)
©
ISO 2006

---------------------- Page: 4 ----------------------

ISO 16432:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Det
...