Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001, adapters, straight, double end, with locking ring

This standard specifies the characteristics of the pipe coupling adapter, 60° spherical sealing face manufactured in titanium alloy with locking ring, for installing in a boss for aerospace applications.
These adapters shall be installed into port connections manufactured in accordance with EN 2602 using ISO 3601-1 sealing O-rings selected sizes. O-ring material depends on the system fluid and operation conditions. The installation shall be performed in accordance with EN 2608.
Nominal working pressure: up to 28000 kPa.
Temperature range: limited by elastomeric sealing ring, −54 °C to +135 °C

Luft- und Raumfahrt - Rohrverschraubungen mit Kugelbuchsen, 60°, aus Titanlegierung TI-P64001, gerade Anschlussverschraubungen mit Sicherungsring

Série aérospatiale - Raccords sphériques, 60°, en alliage de titane TI-P64001, raccords droits, à planter, avec bague de sécurité

Aeronavtika - Cevne spojke , 60°, okrogle, iz titanove litine TI-P64001, prilagodilne (adapterji), ravne, dvostranske, z zapornimi obroči

Ta evropski standard določa lastnosti adapterjev za cevne spojke, 60°, okrogle, iz titanove litine, z zapornimi obroči za uporabo v aeronavtiki.
Adapterji so nameščeni v vhode za adapterje, ki so izdelani v skladu s standardom EN 2602 z uporabo tesnilk O izbranih velikosti v skladu s standardom ISO 3601-1. Material tesnilk O je odvisen od tekočine v sistemu in pogojev delovanja. Namestitev je treba izvesti v skladu s standardom EN 2608.
Nazivni delovni tlak: do 28.000 kPa.
Temperaturno območje: omejeno z elastomernim tesnilnim obročem, −54 °C do 135 °C.

General Information

Status
Withdrawn
Publication Date
30-Oct-2018
Withdrawal Date
30-Jan-2019
Technical Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
25-Jul-2018
Completion Date
25-Jul-2018

Buy Standard

Standard
EN 4510:2018
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4510:2018
01-oktober-2018

$HURQDYWLND&HYQHVSRMNHƒRNURJOHL]WLWDQRYHOLWLQH7,3SULODJRGLOQH

DGDSWHUML UDYQHGYRVWUDQVNH]]DSRUQLPLREURþL

Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001, adapters,

straight, double end, with locking ring

Luft- und Raumfahrt - Rohrverschraubungen mit Kugelbuchsen, 60°, aus Titanlegierung

TI-P64001, gerade Anschlußverschraubungen mit Sicherungsring

Série aérospatiale - Raccords sphèriques, 60°, en alliage de titane TI-P64001, raccords

droits, à planter, avec bague de freinage
Ta slovenski standard je istoveten z: EN 4510:2018
ICS:
49.025.30 Titan Titanium
49.080 /HWDOVNLLQYHVROMVNL Aerospace fluid systems and
KLGUDYOLþQLVLVWHPLLQGHOL components
SIST EN 4510:2018 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4510:2018
---------------------- Page: 2 ----------------------
SIST EN 4510:2018
EN 4510
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2018
EUROPÄISCHE NORM
ICS 49.080
English Version
Aerospace series - Pipe couplings, 60°, spherical, in
titanium alloy TI-P64001, adapters, straight, double end,
with locking ring

Série aérospatiale - Raccords sphériques, 60°, en Luft- und Raumfahrt - Rohrverschraubungen mit

alliage de titane TI-P64001, raccords droits, à planter, Kugelbuchsen, 60°, aus Titanlegierung TI-P64001,

avec bague de sécurité gerade Anschlussverschraubungen mit Sicherungsring
This European Standard was approved by CEN on 13 May 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4510:2018 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4510:2018
EN 4510:2018 (E)
Contents
Page

European foreword ....................................................................................................................................................... 3

Introduction .................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Requirements characteristics .................................................................................................................... 6

4 Quality assurance – Responsibility for inspection .............................................................................. 9

5 Designation..................................................................................................................................................... 10

6 Identification marking ............................................................................................................................... 10

7 Preparation for delivery ............................................................................................................................ 10

8 Technical specification ............................................................................................................................... 10

Bibliography ................................................................................................................................................................. 11

---------------------- Page: 4 ----------------------
SIST EN 4510:2018
EN 4510:2018 (E)
European foreword

This document (EN 4510:2018) has been prepared by the Aerospace and Defence Industries

Association of Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of

ASD, prior to its presentation to CEN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by January 2019, and conflicting national standards shall

be withdrawn at the latest by January 2019.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
---------------------- Page: 5 ----------------------
SIST EN 4510:2018
EN 4510:2018 (E)
Introduction

This European standard is a co-owned standard and a functional equivalent of SAE MA 2113. Further

revisions to this European standard shall be coordinated with the SAE committee.
---------------------- Page: 6 ----------------------
SIST EN 4510:2018
EN 4510:2018 (E)
1 Scope

This European standard specifies the characteristics of the pipe coupling adapter, 60° spherical sealing

face manufactured in titanium alloy with locking ring, for installing in a boss for aerospace applications.

These adapters shall be installed into port connections manufactured in accordance with EN 2602 using

ISO 3601-1 sealing O-rings selected sizes. O-ring material depends on the system fluid and operation

conditions. The installation shall be performed in accordance with EN 2608.
Nominal working pressure: up to 28 000 kPa.
Temperature range: limited by elastomeric sealing ring, −54 °C to +135 °C.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

EN 2424, Aerospace series — Marking of aerospace products

EN 2491, Aerospace series — Molybdenum disulphide dry lubricants — Coating methods

EN 2602, Aerospace series — Ports for adaptors, threaded, with lockring — Geometric configuration

EN 2603, Aerospace series — Port ends for adaptors, threaded, with lockring — Geometric configuration

EN 2606, Aerospace series — 60° interface for adaptors, threaded, with lockring — Geometric

configuration

EN 2608, Aerospace series — Installation and removal requirements for 8°30' adaptors, threaded, with

lockring

EN 2645, Aerospace series — Lockrings for adaptors, threaded, with lockring — Dimensions

EN 3079, Aerospace series — Pipe coupling 8°30' up to 28000 kPa — Adaptors — Metric series —

Technical specification
EN 3311, Aerospace series — Titanium alloy TI-P64001 (Ti-6Al-4V)
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.